2CV old, exhaust pipe under the fender in front on the left. Suitable for Citroen 2CV4 old, AZU to
07/1972. (16hp). Or.Nr.: AZ18299
exhaust system for Citroën 2CV AMI6-8
47 Articles
2CV old, exhaust pipe under the fender in front on the right. Suitable for Citroen 2CV with on the
right side mounted exhaust! Or. No. AK182-4
2CV6, tail pipe securement rubber short. This rubber is for the centric securement. Hole spacing
about 60mm. Suitable for Citroen 2CV6. Made in Germany.
2CV6, tail pipe exhaust clip, for Citroen 2CV6 + 2CV4. These clips are pushed over the tail pipe
e and hold the exhaust retaining rubber. Screw connection: M6
2CV6, rear muffler locking collar, from high-grade steel. Suitable for Citroen 2CV. (the bracket
locates the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear muffler locking collar, made of metal. Suitable for Citroen 2CV. (the bracket locates
the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear silencer (long silencer). Good reproduction. Brand manufacturer from Europe. Without
mounting material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is
locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is
locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under
the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK
2CV6, exhaust fixture rear, galvanizes! That is the lower, rear handle, which is locked under the
floor pan. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust fixture 2CV6, in front, from high-grade steel! The handle is locked under the floor
pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan
Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip rear muffler. Specially strong U-shaped bracket clip, maximum diameter of the
exhaust pipe: 36mm. Suitable for Citroen 2CV6.
2CV, screening plate at the exhaust (simple reproduction), for the protection the hand brake cable
Suitable for Citroen 2CV6 + 4. this sheet metal is mounted original at the 49mm clip at the front muffler. Made in Germany.
Screening plate at the exhaust, for the protection for the parking brake cable. Suitable for
Citroen 2CV. This sheet metal is mounted original at the 49mm clip at the front muffler. The sreening plate have long holes, so it can be mounted the different versions of the 49mm clip.
2CV6, exhaust clip 47mm, for the securement front muffler down to the elbow pipe (S-pipe). Suitable
for Citroen 2CV6 + 2CV4. Or.Nr.: AM1826B
2CV6, exhaust clip 47mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchanger to
the front muffler. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, front silencer. Brand manufacturer from Europe. Suitable for Citroen 2CV6, Dyane 6, AMI and
Mehari. According to our more than 35 years of experience, the only front silencer for the 2CV that fits really well.
2CV6, heat exchanger, left + right (1 pair). Good reproduction made of stainless steel. The heat
exchangers are like the original, and also have the foam on the flaps. But the 2CV with stainless steel heat exchanger sounds slightly different (louder, more metallic). Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990, not suitable for 2CV4.
2CV6, heat exchanger, left + right (1 pair). Good replica. The heat exchangers are like the
original, and also have the foam on the flaps. The heat exchangers are black powder coated. Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990. Not suitable for 2CV4.
2CV6, heat exchanger (heat exchanger), exhaust pipe on the left in the heat exchanger. As
substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
2CV6, heat exchanger, exhaust pipe on the right in the heat exchanger. As substitute for
through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
AMI6, tail pipe, suitable for Citroen AMI6 + AMI6 BREAK, starting from year of construction
06/1963. Or.Nr.: AM1893B
AMI6/AK350, front muffler, suitable for Citroen AK350 starting from year of construction 09/1964
For Citroen AMI6 from 09/1964 to 1967. Or.Nr. AM182-1
AMI6/AZU/DYANE, front muffler round, under the engine. Installed in Citroen AZU to 07/1972, Dyane
until 1969, AMI6. 1x round inlet, 1x round outlet. Or.Nr.: AK1821A
Tailpipe trim chromium-plates. 32mm inside diameter. Universal suitable. Reproduction of the
typical trim from the fifties + sixties. Total length: 135mm.
Exhaust assembly paste 150g. For sealing the plug-in connections when mounting exhaust pipes. The
compound hardens when heated. Very helpful!
copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper
nuts: no rust, no sticking!
47 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
