for Citroën 2CV Alle

Emblem "2CV Charleston" as sticker. Colour: silver with transparent lettering (can be used for the

red/black + yellow/black Charleston).

Emblem "2CV4", as label, gold black. Original-faithful reproduction. Measurements: 36x90mm

Emblem "2CV6 CLUB" as label, silver black. Original-faithful reproduction. Measurements: 60x90mm

Emblem "2CV6 Special" as label, silver black. Original-faithful reproduction. Measurements: 60x90mm

Emblem "2CV6", as label, gold black. Original-faithful reproduction. Measurements: 36x90mm

Emblem "4x4 Citroen", for Mehari. 150 x 110 mm

Emblem "Citroen 250", as label, silver-grey. Original-faithful reproduction. Measurements: 42x109mm

Emblem "Citroen 400", as label, silver-grey. Original-faithful reproduction. Measurements: 42x109mm

Emblem "Citroen", as label, gold - black. Original-faithful reproduction. Measurements: 38x115mm

Emblem "Dyane 6", as label, gold - black. Original-faithful reproduction. Measurements: 38x115mm

Emblem "Dyane 6". Produced made from metal, gold-colored.

• Suitable for this article
• 
  Retaining tie-clip for emblems. Suitable for 2mm of pins. Per piece.
  0,48 €

Emblem "Dyane 6". Produced made from metal, black pamphlet

Emblem "Dyane". Produced made from metal, gold-colored.

Emblem "Dyane". Produced made from metal, black pamphlet

Emblem "Dyane". Produced made from metal, chromium-plated.

• Suitable for this article
• 
  Retaining tie-clip for emblems. Suitable for 2mm of pins. Per piece.
  0,48 €

Emblem (signature) 2CV6, reproduction made of metal. mounting: stud bolt 3,5mm, 10mm long

Emblem (signature) AMI6. Gold-colorend. Reproduction made from metal.

Emblem (signature) AMI(. Gold-colorend. Reproduction made from metal.

Emblem (signature) AMI8. Black pamphlet on gold-colorend label. Produced made from metal.

Retaining tie-clip for emblems. Suitable for 2,5mm of pins. Per piece.

Retaining tie-clip for emblems. Suitable for 2mm of pins. Per piece.

Retaining tie-clip for emblems. Suitable for 3mm pins. Per piece!

Retaining tie-clip (locking clip), for 4mm pins (securement of emblems). Per piece. Or. No

ZC9619867U

Vent screw M10x1. Suitable for Citroen 2CV to about year of construction 1975. (Vehicles with brake

hoses)

• Suitable for this article
• 
  Dust cap from rubber, for the vent screw at brake calipers and wheel brake
  0,43 €

Bleeder screw M7x1. Original reproduction! Suitable for Citroen DS, SM, CX, 2CV, etc.. (for DS only

for the wheel brake cylinders, not for the brake pliers)

Vent screw M7x1. Universal suitable for many Citroen, Peugeot, Renault. Length: 22mm. Particularly

suitable for the wheel brake cylinders, for Citroen 2CV with a dual circuit brake system.

• Suitable for this article
• 
  Dust cap from rubber, for the vent screw at brake calipers and wheel brake
  0,43 €

Vent screw M8x1,25, for the brake caliper. Suitable for Citroen 2CV, Dyane, Ami8.

• Suitable for this article
• 
  Dust cap from rubber, for the vent screw at brake calipers and wheel brake
  0,43 €

Spare parts catalogue 2CV et Fourgonnettte 250k, No. 446 models 49-68, edition 68 approx. 300

pages, German, English, French.

spare part catalogue for AK/AZU 1971-1975, in german, No. 630

0

Eccentric for the hand brake handle at the brake caliper (per piece). Suitable for Citroen 2CV

Dyane, Mehari

• Suitable for this article
• 
  Screw set (2 item) for the securement the lever (parking brake) at the brake
  6,84 €

M9x34 screw, for the securement of the parking brake exenter at the brake caliper. Suitable for

Citroen 2CV, starting from year of construction 1981.

Fanfare (horn). 2 fittings. 12 V.

• Suitable for this article
• 
  Operating circuit relay 12 Volt / 30 ampere of contact rating!
  5,86 €

Support - lamp securement for tail lamp, Citroen 2CV with diagonal tail sheet metal. Reproduction

adaptation work are possibly necessary.

Spring for the adjusting lever for the seat lengthwise adjustment on the left (single seat + seat

bench). Suitable for Citroen 2CV.

• Suitable for this article
• 
  Spring for the adjusting lever for the seat lengthwise adjustment on the right
  9,82 €

Spring for the adjusting lever for the seat lengthwise adjustment on the right (single seat + seat

bench). Suitable for Citroen 2CV.

• Suitable for this article
• 
  Spring for the adjusting lever for the seat lengthwise adjustment on the left
  9,82 €

Spring for the Choke flap in the carburetor. (oval carburetor). Dimension: 0,5 x 4,5 x 20mm

Suitable for Citroen 2CV6.

Spring for the diaphragm of the low-pressure box. Suitable for Citroen 2CV6 with oval carburetor.

Spring suitable for the gear lever in the old gearbox, for Citroen 2CV from the fifties + sixties

es (gearbox shifter rod is rear at the gearbox). The spring is mounted under the gearbox cap. Or.Nr.A33497

Spring for gear racks thrust piece (in the steering gear). Suitable for Citroen 2CV. Or.Nr.A4422

Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971. Or.Nr.: AY4311

• Suitable for this article
• 
  Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for
  26,68 €
• 
  Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable
  21,72 €
• 
  Rubber stop with metal plate, at the suspension pot (for small diameter)
  8,83 €
• 
  Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the
  6,45 €
• 
  Spring hinged tie bar adjustment (from high-grade steel) with eye. New version
  18,74 €
• 
  Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV
  42,69 €

Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV

starting from year of construction 11/1971.

• Suitable for this article
• 
  Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for
  25,68 €
• 
  Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable
  21,72 €
• 
  Rubber stop with metal plate, at the suspension pot (for small diameter)
  8,83 €
• 
  Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the
  6,45 €
• 
  Spring hinged tie bar adjustment (from high-grade steel) with eye. New version
  18,74 €
• 
  Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV
  42,69 €

Spring between the hand brake handles, at the brake caliper. Suitable for Citroen 2CV starting from

year of construction 1981.

Spring Assortment, 200 pcs. Compression and extension springs, popular sizes

R-Clip Assortment, 150 pcs. 6 popular sizes, 2.4 x 31 mm, 2.0 x 33 mm, 2.0 x 40 mm, 2.8 x 42 mm

3.5 x 45 mm, 4.0 x 75 mm.

Suspension pot big (130mm), new part. Suitable for Citroen AK400, AMI8. Optically like original.

Suspension pot, new part, with high-grade steel covering. Suitable for Citroen 2CV. Without

mounting material, small diameter. Old part return not necessarily!

• Suitable for this article
• 
  Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet
  17,84 €
• 
  Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV
  4,37 €
• 
  Rubber stop with metal plate, at the suspension pot (for small diameter)
  8,83 €
• 
  Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the
  6,45 €
• 
  Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality
  114,53 €

Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK, ACDY, Ami 6+8. per

piece. Reproduction.

Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids are

inclusive brass bush and rear sealing ring. Per piece. Or. No. AZ434-96. Made by "Franzose / CiPeRe".

• Suitable for this article
• 
  Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet
  17,84 €
• 
  Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV
  4,37 €
• 
  Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for
  26,68 €
• 
  Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for
  25,68 €
• 
  Suspension pot casing of small diameters, produced made of metal. 113-115mm
  19,73 €
• 
  Rubber stop with metal plate, at the suspension pot (for small diameter)
  8,83 €
• 
  Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the
  6,45 €
• 
  Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality
  114,53 €

Suspension pot casing of large diameters, produced made of metal. 130-135mm. Suitable for Citroen

AK400, ACDY, AMI6+8. The suspension pot casing is supplied without locking caps.

• Suitable for this article
• 
  Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK
  38,58 €

Suspension pot casing of small diameters, produced made of metal. 113-115mm. Suitable for Citroen

2CV. The suspension pot casing is supplied without locking caps.

• Suitable for this article
• 
  Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV
  19,73 €