for Citroën 2CV Alle

Headlamp casing round, chrom-plated, from synthetic. Suitable for Citroen 2CV, HY.

• Suitable for this article
• 
  Washer conically, for the securement of the headlamps to the head light
  4,15 €

Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses

handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!

Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose

External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)

Sliding window guide (1 pair) down, Citroen Dyane + Acadyane. Reproduction. Made in European Union

Optically like original!

Hose air circulation for the disc brake in front. Suitable for bad copied, French air circulations

(not suitable for our number 13020 + 13021). Citroen 2CV. 35mm inside diameter, 250mm long.

Hose air circulation, for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari

Reproduction. Inside diameter: 38mm. Length: 250mm.

Hose air circulation for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari

Accurate reproduction from synthetic, as the original hoses. Inside diameter 40-42mm, length 235mm.

Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges

This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

• Suitable for this article
• 
  Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with
  24,69 €

Hose clamp 70 - 90mm. Suitable for exhaust air hose, for Citroen 2CV4 + 2CV6.

Hose clamp from high-grade steel,7-13 mm, for the gasoline line. Suitable for Citroen 2CV.

Hose clamp 120-140mm

hose clamp for 15-20mm.

hose clamp for 40-60mm.

Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.

• Suitable for this article
• 
  Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band
  3,67 €
• 
  Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band
  3,62 €
• 
  Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band
  3,87 €
• 
  Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band
  4,21 €
• 
  Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band
  4,12 €
• 
  Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band
  4,26 €
• 
  Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band
  4,56 €
• 
  Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band
  4,71 €
• 
  Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band
  4,91 €
• 
  Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band
  5,86 €

Lockcylinder set, suitable for Citroen DS, from year of construction 2/1969 to 1971 + AMI6

Consisting of: 3 x lockcylinder (doors + luggage compartment). 2 keys. The lockcylinders have down a round pin. Diameter: 12mm. Length over everything: 34mm. Or. No. DX861-13B

• Suitable for this article
• 
  Push-button (application for the lockcylinder), for the door handles (of year
  39,57 €
• 
  Fixing clip, for the securement of the lockcylinder in the locking pivot
  1,57 €

Key ring, 2CV, blue, enamel

Key ring, 2CV, green

Key ring, 2CV, yellow, enamel

Key ring 2cv light blue, enamel

Key ring 2CV red, enamel

Key ring, 2CV, white, enamel

Key ring, Mehari, red, enamel

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8

Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.

Fuse assortment.

Lubrication nipple cap from synthetic. Color: Red.

Lubricate nipple with M7 thread. Suitable for Citroen 2CV, DS, 11CV, HY, etc.

• Suitable for this article
• 
  Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Rear mud flaps (left + right) with Citroen logo. These mud flaps can be universally installed

(Citroen 2CV, Dyane, Mehari, DS, AMI, etc.). Dimensions approx.: 22 cm wide, 25 cm high. The mud flaps have different mounting holes. This allows the mounting height to be adjusted. The mud flaps are of good quality. The brackets for mounting must be made yourself! (There's always something).

Screw for the driving shaft to the drive shaft. Gearbox side Installed. Suitable for Citroen for

2CV to year of construction 1971. Or.Nr.: AM451-94A

Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citroen

2CV, Dyane, Ami, Mehari.

Screw for SEIMA turn signal cap + taillight cap. Suitable for Citroen 2CV. Citroen HY. Citroen DS

BREAK. Or. No. AM544-17B

Screw cross lens head (3,9x16) from stainless steel, for round indicator + stop light. For Seima +

AXO caps. Only suitable for synthetic bases. Per piece.

Screw cross lens head (4.8x22) in stainless steel. Per piece.

• Suitable for this article
• 
  Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm
  0,94 €

Screw cross lens head (4.8x32) in stainless steel. Per piece.

• Suitable for this article
• 
  Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm
  0,94 €

Cross lens head screw (M4x10) from stainless steel, for round indicator + stop light. For Seima +

AXO caps. Only suitable for metal bases. Per piece

Cross lens head screw (M4x12) from high-grade steel, for round indicator + stop light. For Seima +

AXO caps. Only suitable for metal bases. Per piece

Screw M10x50

M6 screw. Securement wheel brake cylinder. Suitable for Citroen 2CV.

M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for

Citroen 2CV6 + 2CV4, to year of construction 1981.

M7 x 25 screw. For the securement of the intake manifold on the cylinder head. Suitable for Citroen

2CV6. Or. No. ZD 9372 000W

M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for

r Citroen 2CV6, starting from year of construction 1981.

screw M8x16

Screw, for securement upper dashboard lining. For Citroen 2CV. Original-faithful reproduction

(Sheet metal driving screw in black, with large bolt head)

• Suitable for this article
• 
  Dashboard clamping nut. Suitable for Citroen 2CV. This nut is mounted in the
  3,07 €

Screws for the carburetor cap. Suitable for Citroen 2CV with oval carburetor. (6 fittings). The

screws correspond optically to the original screws.