for Citroën 2CV Alle

Release fork for the clutch. Suitable for Citroen 2CV6, AK, Dyane, last version, from year of

construction 03/1982. The last improved version of the release fork is reinforced compared to the previous version. Of course, our release forks are made of high-quality steel.

• Suitable for this article
• 
  Clutch release lever plastic sleeve, for the bearing in the clutch housing
  2,33 €

Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroen

2CV4 + 2CV6.

Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of

a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.

Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch

with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3

Clutch release sleeve 2CV6 + 2CV4, Installed of year of construction 1970 to 1982. Reproduction.

Clutch release sleeve 2CV6, Installed starting from year of construction 02/1982. Reproduction

Made in Europe

Clutch release sleeve for Citroen 2CV6, starting from year of construction 02/1982. Original Valeo.

Clutch release sleeve locking spring, for Citroen 2CV6 starting from year of construction 02/1982.

Release ring clutch, for all Citroen 2CV + AMi + Dyane, which have the clutch release yoke above in

the transmission bell housing. (2CV with 9, 12 + 16 HP) of Or.Nr.: A31414

Car cover 2CV, colour red. High quality synthetic fibre, air-permeable. Specially make for 2CV. The

Autocover is for indoor, not for outside!

Autoskop, for the search for abnomal vibrations or liquid leakage. Delivery with one sensing head

AZAM, floor pan on the left, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has

the high curvature for the large suspension pot of the Ami6. Made in Europe.

AZAM, floor pan on the right, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has

the high curvature for the large suspension pot of the Ami6. Made in Europe.

AZU, floorpanel, left, good quality reproduction, electrolytic galvanised! Made in Europe.

AZU, floorpanel right, good quality reproduction, electrolytic galvanised! Made in Europe.

AZU, Rear end panel cross-beam Citroen AZU, complete. Or. No. AZU 832-5. Made in Europe.

• Suitable for this article
• 
  AK/AZU/ACDY, closing sheet from downside, for the rear end cross-beam (our
  14,86 €

AZU, rear window seal, angular. This seal is for the angular window in the tailgate. Suitable for

Citroën AZU.

AZU, rear window seal, oval. This seal is for the small oval window in the rear door. Suitable for

Citroën AZU.

AZU, tail gate seal on the left + on the right. Suitable for Citroen AZU 250. (low box body).

AK250, rear door left (square window, narrow grooves)), reproduction. Suitable for Citroen AK250

(low box). The door is electrolytically galvanised! Made in Europe.

• Suitable for this article
• 
  AZU, rear window seal, angular. This seal is for the angular window in the
  39,57 €

AZU, rear door left (oval window), replica. Suitable for Citroen AZU (low box). The door is

electrolytically galvanised! Made in Europe.

• Suitable for this article
• 
  AZU, rear window seal, oval. This seal is for the small oval window in the rear
  26,68 €

AZU, rear door right (square window, narrow grooves)), reproduction. Suitable for Citroen AZU 250

(low box). The door is electrolytically galvanised! Made in Europe.

• Suitable for this article
• 
  AZU, rear window seal, angular. This seal is for the angular window in the
  39,57 €

AZU, rear door right (oval window), replica. Suitable for Citroen AZU (low box). The door is

electrolytically galvanised! Made in Europe.

• Suitable for this article
• 
  AZU, rear window seal, oval. This seal is for the small oval window in the rear
  26,68 €

AZU, rear axle stop repair sheet metal left, for Citroen AZU.

AZU, interior fender at the rear left, in the box body! Suitable for Citroen AZU. 1417mm lengthens

Or.Nr. AZU821-5B. Manufactured in manual work in the European Union.

AZU, interior fender at the rear right, in the box body! Suitable for Citroen AZU. 1417mm

lengthens. Or.Nr. AZU821-5C. Manufactured in manual work in the European Union.

AZU, baggage compartment floor completely for short box body. For Citroen AZU 250. Or.Nr. AZU832-2

AZU, fender at the rear left, for Citroen AZU. Small corrugated sheet. The fender is

electrolytically galvanized! Made in Europe.

AZU, fender at the rear left. Wide corrugated sheet. Suitable for Citroen AZU. Made in Europe.

AZU, fender at the rear right, for Citroen AZU. Small corrugated sheet. The fender is

electrolytically galvanized! Made in Europe.

AZU, fender at the rear right. Wide corrugated sheet. Suitable for Citroen AZU. Made in Europe.

Profile, left, centre, lengthwise over box section AZU250. Made in Europe.

AZU, transverse reinforcement rear, under the box body, for Citroen AZU. Or.Nr. AZU832-73

AZU, spare wheel hood for Citroen AZU 250. Small corrugated sheet. The sheet metal is

electrolytically galvanized! Made in Europe.

AZU, backwall at the rear left for Citroen AZU. 1x opening for rear light. The sheet metal goes

completely from downside to above in the box body. Overall length: about 117,5cm.

AZU, rear panel rear left for Citroen AZU. The sheet metal goes completely from the bottom to the

top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.

AZU, backwall at the rear right for Citroen AZU. 1x opening for rear light. The sheet metal goes

completely from downside to above in the box body. Overall length: about 117,5cm.

AZU, rear panel rear right for Citroen AZU. The sheet metal goes completely from the bottom to the

top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.

AZU, side panel on the left (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out

of sheet metal. Or. No. AZU825-95B

AZU, side panel on the left (casing body), without windows. Suitable for Citoen AZU. Reproduction

out of sheet metal.

AZU, side panel on the right (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out

of sheet metal. Or. No. AZU825-95C

AZU, side panel on the right (casing body), without windows. Suitable for Citoen AZU. Reproduction

out of sheet metal.

AZU, front transverse bulkhead (above the roof of the cab), for the box body. Suitable for Citroen

AZU (low box). This is a partial sheet from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.

• Suitable for this article
• 
  AZU, front left bulkhead, for box body. Suitable for Citroen AZU (low box)
  74,28 €
• 
  AZU, front right bulkhead, for box body. Suitable for Citroen AZU (low box)
  74,28 €

AZU, front left bulkhead, for box body. Suitable for Citroen AZU (low box). This is a partial sheet

from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.

• Suitable for this article
• 
  AZU, front right bulkhead, for box body. Suitable for Citroen AZU (low box)
  74,28 €
• 
  AZU, front transverse bulkhead (above the roof of the cab), for the box body
  69,32 €

AZU, front right bulkhead, for box body. Suitable for Citroen AZU (low box). This is a partial

sheet from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.

• Suitable for this article
• 
  AZU, front left bulkhead, for box body. Suitable for Citroen AZU (low box)
  74,28 €
• 
  AZU, front transverse bulkhead (above the roof of the cab), for the box body
  69,32 €

AZU, tank panel for Citroen AZU 250. Small corrugated sheet. The sheet metal is electrolytically

galvanized! Made in Europe.

AZU, door lock rear inside, for the tail gates. Suitable for AZU tail gate, to year of construction

09/1968. The door lock is without interior latching! Reproduction. Or. No. AZU8619

AZU, square profile (square cross-beam) on the right, centrically, lengthwise over the box body

Suitable for Citroen AZU 250. Made in Europe.

Ballistol oil 200ml bottle. The universal oil, long-proven and unequalled. Optimally for rust

t protection, maintenance of precision mechanics, in addition, leather, wood etc. (Ballistol is also well- known as weapon oil) Ballistol gumming also after year not. To show for rust protection very easily with brush lubricator.

Battery bow spring, 5mm diameter. Suitable for Citroen 2CV, Mehari, Dyane, Ami, DS, HY. Or. No

AM53172