Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
for Citroën 2CV Alle
3859 Articles | Page 58 of 78
Back-up light reproduction (Hella), the housing is made of plastic. Width 120mm, height of 70mm
The headlamp is for a later mounting underneath the bumper! It cannot be used as substitute for the original backup lights from R4! Lampholder for the bulb: Ba15s. Maximum 21Watt. (Our number 14035 + 14045).
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Tail lamp and/or stop light round, original Seima 3054. 3055. (no reproduction, with test symbol
E") 1 thread light, only brake or taillight! With metal base + support! The glass has 68,5mm diameter! Used in HY, AZU, DS - in many Renault + Peugeot models as well!
Rear light spacer base, (2 pieces, left + right), chrome-plated! Would you like something a little
classier? A very easy way to add more glamour to your 2CV! The existing spcaer base is replaced by the chrome-plated spacer! Assembly: Unscrew the rear light from the plastic base. (3x M5 nut from the boot - it is not enough just to remove the rear light glass).
VIDEO 
Tail lamp at the rear left. Suitable for Citroen 2CV, to year of construction 1990. Very
significant reproduction!
Tail lamp at the rear right. Suitable for Citroen 2CV, to year of construction 1990. Very
significant reproduction!
Complete rear light. Suitable for Citroen ACDY (Dyane Van- Acadiane) + Peugeot 504 Pick Up +
Peugeot J7. The rear lights have an "E" approval mark!
Taillight + stop light, round, (2 thread light). 70mm diameter. Suitable for Citroen AK 400, DS
BREAK, HY, Mehari. Version AXO! (suitable bulb: Item 14037). (Reproduction, without "E" test mark)
Taillight cap seal (for original tail lamps orange), suitable for Citroen 2CV to year of
construction 1964 (diagonal rear end panel). Extremely rare export version. Original one from old stock (NOS).
Rear light cap seal (left + right, suitable for both sides), for Citroen Dyane. This seal is fitted
between the rear light glass and the rear light base.
Rear light cap seal, left. Suitable for Citroen 2CV6 + 2CV4 with Seima rear lights. Installed from
year of construction 07/1972 to 1990. This seal is mounted between the rear light glass and the rear light lower part. Or. No. AM544-23A
Rear light cap seal, right. Suitable for Citroen 2CV6 + 2CV4 with Seima rear lights. Fitted from
year of construction 07/1972 to 1990. This seal is fitted between the rear light glass and the rear light base. Or. No. AM544-23B
Taillight cap on the left, suitable for Citroen 2CV to year of construction 1964 (diagonal rear end
panel). With lens for the license plate light. Color: Completely red.
Taillight cap on the right, reproduction, for Seima light. The caps are supplied without test
characters. Suitable for Citroen 2CV.
Taillight cap on the right, suitable for Citroen 2CV to year of construction 1964 (diagonal rear
end panel). With lens for the license plate light. Color: Completely red.
Taillight cap red (original AXO, with "E" test mark). Suitable for Citroen AK. Citroen DS BREAK
HY, Mehari, AMI6. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar level from the inside measured: 14,5mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap red (original SEIMA, with test characters). Suitable for Citroen AK. Citroen DS
BREAK. HY, Mehari. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar level from the inside measured: 10,0mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap, red, round (Reproduction, without "E" test mark), for Citroen AK/AZU, DS Break, HY
Y, Mehari, AMI6. AK544262A, for manufacturer Seima
Taillight cap, suitable for Citroen 2CV to year of construction 1964 (diagonal rear end panel)
Color: Orange one + red. Extremely rare export version. Original one from old stock (NOS). Without reflector. The light fits on the left and on the right.
Taillight cap, befitting for Citroen ACDY (Dyane Van), Mehari 4x4, + Peugeot 404 Pick UP, 504 Pick
UP, J7. Fits on the left + on the right.
Taillight cap, suitable for Citroen Dyane. Fitting on the left of or on the right, with lens for
the registration plate light.
Taillight cap, suitable for Citroen Dyane. Fitting on the left of or on the right, without lens for
the registration plate light.
Reflector square, framed in metal. With fixing straps, dimensions approx. 60x45mm. These reflectors
were used in many French cars!
Reflector with locking collars. Suitable for Citroen AK, AZU, HY. Universal suitable for other
classic cars. Diameter: 56mm.
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Cable harness color markings (100 item), for plugs with 4mm diameter. 9 different colors. Suitable
for Citroen 2CV, DS, HY, SM, GS, CX, Peugeot
Sause Ente adhesive kit, Citroen 2CV. Reproduction from the original supplier! 4-coloured. The
decal was scanned 15 years ago on an original vehicle. The black edges are somewhat pixelated. But you can only see this if you squat down and stand 10cm away!
PDF FILE 
3859 Articles | Page 58 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
