Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
for Citroën 2CV Alle
3859 Articles | Page 62 of 78
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Radius arm front left with mounted wheel hub (incl. wheel bearing). Suitable for Citroen 2CV, up to
the year of construction 1990, reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 937 + 5502 003
Radius arm front left. Suitable for Citroen 2CV, up to the year of construction 1990, reproduction
The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 937G
Radius arm front right with mounted wheel hub (incl. wheel bearing). Suitable for Citroen 2CV, up
to the year of construction 1990, reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 938 + 5502 003
Radius arm front right. Suitable for Citroen 2CV, up to the year of construction 1990
reproduction. The Radius arms are supplied without paint. You can therefore optimally protect them against rust. The optical quality surpasses the (then new) original Radius arms (which were sometimes horribly processed). Or. No. 5504 938D
Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically
constructed over the total construction period (also for Dyane, AK, AMI, Mehari). They fit for the front axle and for the rear axle. Dimensions: 63.5 x 95 x 17 mm. Or. No. ZC 9620041U
Radius arm bearing set, suitable for Citroen 2CV, Dyane, Ami. Consisting of: 4x radius arm bearing
4x shaft seal radius arm bearing, 2x split pin for radius arm nut.
Radius arm bearing locknut, suitable for Citroen 2CV, Dyane, AK, Mehari, AMI. Measurement: 63 x
150mm. Or. No. AZ414-90
Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews the felt washer
Suitable for all year of construction and all series. (2CV, AK, AZU, ACDY, Dyane, AMI). Measurement: 72 x 95,6 x 7mm. Made in Germany.
Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from 1967. Reproduction
per piece. Note: Flywheel screws are necked-down bolts and should be always changed, if it released.
Fly wheel, bearing in the fly wheel. Mounting (guide) for the primary shaft. Suitable for Citroen
2CV. Inside diameter: 12mm, outside diameter: 18mm, height: 18mm.
Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitable
for Citroen 2CV4 + 2CV6, up to year of construction 02/1972. Design = needle bearing. Inner diameter: 12mm, outer diameter: 18mm, height: 10mm. Or. No. ZC9620 322U
Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitable
for Citroen 2CV6, from year of construction 03/1973 to 1990. design = needle bearing. Inner diameter: 12mm, outer diameter: 18mm, height: 16mm. Or. No. AM9121 100L
Flywheel, new part (heavy version). Suitable for Citroen 2CV6, from 1970 to 02/1982. Weight
approx. 12kg. Also suitable for Citroen Dyane, AK, AMI. All 602cc engines with front drum brake. Or. No. AY8312-000.
Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We let
produce again the complete fly wheel with gear rim, since the old gear rims are often worn. The fly wheel is fine-heaved and ready for assembly. Or. No. 95559486. Produced in Europe.
Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
Citroen for 2CV6. Size: 11,9x18x4mm. Or. No. 95495074. Made in Germany.
Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
Citroen for 2CV6. Size: 12x18x3mm. Or. No. 7903078053. Made in Germany.
Safty bealt hook 2CV, instead of from synthetic now from high-grade steel. Securement like original
at the B-support. The hook does not chamfer now any longer so fast, how the orginale synthetic hook! Made in Germany.
Safety belt (lap belt rear) holding hook from synthetic. The hook is on the left + on the right
Installed above the rear seat. Suitable for Citroen 2CV.
Seat belt suspension bracket for the static belt (the belt buckle looks like a hammer head). This
holder is installed on the B-pillar. Suitable for Citroen 2CV + AMI.
Safety belt rear (lap belt), for Citroen 2CV. At the rear left + rear on the right fitting. The
belt is supplied with belt latch mechanism. The belt has a "E" test character!
Safety belt front. Suitable on the left + on the right (extremely extended), for Citroen 2CV + DS
3 spot belt, inclusive buckle connection (belt latch mechanism). Automatic seat belt re-tractor. Belt length: 297cm. Buckle connection: 45cm. The belt has a "E" test character! Buckle connection is lower bent. Suitable for the front passenger seat including a child's seat or oversized body stature. All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Safety belt front. Suitable on the left + on the right (extended), for Citroen 2CV. 3 spot belt
inclusive buckle connection (belt latch mechanism). Automatic seat belt re-tractor. Belt length: 297cm. Buckle connection: 45cm. The belt has a "E" test character! Buckle connection has lower a straight mounting. Suitable for very tall person or rather a stocky body. All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Safety belt front. Suitable on the left or on the right (Standard equipment), for Citroen 2CV. 3
spot belt, inclusive buckle connection (belt latch mechanism). Automatic seat belt re-tractor. Belt length: 297cm. Buckle connection: 30cm. The belt has a "E" test character! Buckle connection has lower a straight mounting. Suitable for normal stature (average person). All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Safety belt in front statically ( without retractor mechanism ), on the left + on the right
fitting. This belt was installed in Citroen 2CV + Citroen DS in the sixties and sevenries. All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
Fuse holder (cable shoe). High-quality reproduction of the original fixture, which never was
available from Citroen. Made in Germany.
16 ampere fuse with screw-connections, optimal to protect additional loads (devices). The housing
can be equipped with other fuse strengths (ratings) .
Fuse set (glass fuse).Contents: 1x 5A, 10A , 15A, 20A, 30A (amps) each. Dimension: 6,3 x 32mm
Complete in an outer packaging (ideal for the 2CV, DS, HY... travel kit!).
Safety sheet on the left (centrically in the hinge). For Citroen HY, bonnet and the tail gate. For
AZU: Tail gate on the left. Or. No. H844-93
Safety sheet on the right (centrically in the hinge). For Citroen HY, bonnet and the tail gate. For
AZU: Tail gate on the right. Or. No. H844-93A
Fuse box lid (only the lid). For fuse box "SEIMA". Reproduction, but optically like original
Citroen. Suitable for Citroen 2CV, DS, HY.
Fuse box with lid. Color beige-grey. For 4 glass fuses. Inclusive the fixtures for the fuses
Reproduction, but optically like original Citroen. Suitable for Citroen 2CV, DS, HY.
Fuse box with cap. Color: black. Holds 4 glass fuses. Replica. Connection: flat plug! Compatible
with Citroën 2CV, DS, and HY. Of course, this fuse box can also be used as a universal part!
Fuse box with cap. Color: white. Holds 4 glass fuses. Replica. Connection: flat plug! Compatible
with Citroën 2CV, DS, and HY. Of course, this fuse box can also be used as a universal part!
Securing clip for the speedometer cable at the gearbox. For 2CV, Installed to year of construction
05/1958, Citroen DS and ID from 03.1958 to 1964, Citroen HY starting from year of construction 3/1958. Or. No. A381-96
3859 Articles | Page 62 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
