Rear rack from polished high-grade steel. Suitable for Citroen 2CV. Reproduction of the original
porter. Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes.
for Citroën 2CV Alle
3848 Articles | Page 40 of 77
Rear rack, black primed. Suitable for Citroen 2CV. Reproduction of the original porter
Measurements about 850x370mm. The holder is mounted on the luggage compartment lid. It is necessary to bore 4 holes (Drilling dimensions - hole spacing: 490 x 350 mm).
Tail cable harness, suitable for Citroen 2CV6, starting from year of construction 07/1973! (with
connection for a reversing lamp). Made in Germany.
Heating air fan for the installation into the heating hose of Citroen 2CV. The hose is cut through
and mounted then the fan between the heating hose ends. Optically almost invisibly. The mounting material is provided. The fan has the following dimensions: 80mm diameter, construction length 50mm.
Heating air fan in snail form. By the design a larger air orifice is possible. For conversion in
Citroen 2CV. Without built-in set. The suitable built-in set has the number 14505.
Heating hose 2CV top, RHD, between distributor warm air and upper nozzle, for right hand drive 2CV
80mm inside diameter, 15mm foam material. Overall length about 1000mm.
Heating hose from felt, for Citroen 2CV from the fifties. Cheap, but optically not original
reproduction. Diameter: 70mm. Length: 420mm.
Heating hose from felt, above curved. Suitable for Citroen AZU, to year of construction 07/1972
Citroen 2CV, with 6 V electrical connection. The heating hose is related to a side with vinyl. Optically like original! Or. No. AZ56484B
Heating hose lined (with foam on the inside). Suitable for Citroen 2CV6, 2CV4 + AMI6. Own
reproduction. With aluminium core, making it much more durable! 500 mm long, 90 mm outer diameter, 15 mm foam.
Heating hose above, for Citroen 2CV6+4. length about 225mm. This hose was mounted between the warm
air distributor in the engine compartment and the air duct at the windshield. The hose is isolate with foam material.
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose made of rubber! Complete set!
Heating hose set for Citroen 2CV6. Consisting of: 2x heating hose of the heat exchanger into the
interior, 1x heating hose above, between distributor warm air and upper nozzle, 2x exhaust air hose! Complete set!
Heater adjustment lever with fixture. Suitable for Citroen 2CV, HY, Mehari. Reproduction out of
f painted sheet metal. Or. No. 5403748
Heater hose on the left of Citroen Mehari. Diameter 70mm, 580mm long, isolate with 10mm foam
m material. Heat exchanger to distributor in the front wall.
Heater hose on the right of Citroen Mehari. Diameter 70mm, 490mm long, isolated with 10mm foam
material. Heat exchanger to distributor in front wall.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for both heater cables. Suitable for Citroen 2CV.
Heater cable sheet metal holder, securement of the heater cable on the heat exchanger. This sheet
metal holder is for one heater cable. Suitable for Citroen 2CV.
Heater cable short, suitable for Citroen 2CV, for all years of construction. Installed one between
the heating exchangers in the engine compartment. Depending upon year of construction it can be possible that the cable must be cut.
Heater cable long, for Citroen 2CV6. Mounted at the heater adjustment lever in the interior to the
heating exchanger. Installed one starting from 04/1972. Bowden cable about 1480mm long. Casing about 1250mm. The heater cable is individually shortenable.
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Significant after production from the European Union. Or.Nr. AZU 644-101
Heater cable tension force clamp (wide) on the heat exchangers, for Citroen 2CV. With this tension
force clamp the two heater cables are adjusted. Or.Nr. AZU 644-101
Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low
shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.
Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting
spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.
Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for
the roof and door linings.
Inside roof lining made of imitation leather (perforated look), laminated (lined) with foam
Suitable for Citroen AMI6 berline + AMI 6 break.
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: velour light grey, with thin foam backing. Without wheel housing lining!
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: bordeaux
Cross-beam linings interior (1 set = for on the left + on the right), for Citroen 2CV to year of
construction 1990. New version with window in the C-support. Material: grey.
3848 Articles | Page 40 of 77
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
