Control light red, largely, conically. Reproduction of the original lights. Unfortunately the
quality is not so good. Suitable for Citroen 2CV, DS, HY.
for Citroën 2CV Alle
3848 Articles | Page 46 of 77
Universal joint suitable for the drive shaft, for Citroen 2CV from the sixties + fifties
Reproduction. 25mm diameter, 57mm long. Significant reproduction. Or.Nr.: A37203
Universal joint suitable for the drive shaft, for Citroen 2CV from the sixties + fifties
Reproduction. 25mm diameter, 61mm long. Or.Nr.: A37203
Universal joint retaining ring (check ring) for the drive shaft. Suitable for Citroen 2CV from the
fifties to seventies. AM372-6C
Elbow seal exhaust 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany.
Exhaust manifold gasket made of copper 2CV6 (pure copper, 1.5mm thick!). Suitable for all 597/602cc
engines. Citroen 2CV6, Dyane 6, ACDY, Mehari, AMI8. Made in Germany
Elbow seal inlet 2CV6, improved version. The seal is made of most significant seal material
Preparation of Reinz Germany. Measurement: 28,3x43,75. Or.Nr.: 96177787
Manifold seal inlet, for 602cc engine. Citroen 2CV6. Or.Nr. 96177787. Measurement: 28,3x43,75mm
Original equipment manufacturer "Glaser"
Manifold seal inlet, for Citroen 2CV AZAM. Inside diameter: 34mm. Diameter securement: 8,0mm
Center to center securement: 55mm. Or.Nr.: AM1412C
Elbow seal suitable for inlet + exhaust, for Citroen 2CV with 12 HP engine. (Vehicles with 3
connectors of the Inlet + exhaust manifold). Significant reproduction of the original manufacturer!
Elbow seal inlet + exhaust for Citroen 2CV old. The seals are installed with vehicles, whose elbow
spider with 3 screws per side are fastened.
Inlet + Exhaust manifold for 2CV (425ccm engine upto 09/1966), without attachment for generator
r, reproduction. Or.no.: AK1411
Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single
carburetor (round carburetor). Also suitable for Peugeot + Renault.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Clutch set for 2CV old, from 1955 to 1966, clutch disk with 10 splines, centrifugal clutch
reproduction. 160mm diameter. Note: The clutch must be adjusted after Citroen work instruction!
PDF FILE Clutch set for 2CV old, from 1955 to 1966, clutch disk with 10 splines. Normal gear shift
Reproduction. 160mm diameter. Made in EU
Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with drum
brake in front). Dyane of year of construction 1968 to 1982. Mehari from 1968 to 1982. The clutch set consists of: Pressure plate (3 levers) clutch disk and clutch release sleeve. Reproduction, made in Europe. Note: The clutch must be adjusted after Citroen work instruction A.312-00! Made in Europe
Clutch set for Citroen 2CV6+4, of year of construction 1970 to 1982. Change of three fingers
pressure plate on multi-disk. Completely with clutch release sleeve. (Pressure on the pedal is lower)
Clutch set for Citroen 2CV6, starting from 02/1982, with torsion bars. The new clutch disk with
torsion bars prevents starting acceleration bucking by e.g. light axial runout of the fly wheel or pressure plate. 160mm diameter, 18 teeth.
Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in front)
Dyane 6, starting from year of construction 1982. Mehari, of year of construction 4/1982 to 1990. Manufacturer: Valeo. 18 teeth, diameters: 160mm. (Multi-disk) new part.
Clutch set for Citroen 2CV6, starting from year of construction 03/1982. Reproduction, Made one in
European Union. 18 teeth, diameters: 160mm. (Multi-disk) new part.
Clutch disk centrifugal clutch. Suitable for Citroen 2CV starting from year of construction
04/1966. 160mm diameter. 18 teeth. Or.Nr.AZ313-01C
Clutch disk, starting from year of construction 03/1982. Suitable for Citroen 2CV6. Diameter
160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!
Clutch disk, to year of construction 02/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of
teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch cable for Citroen 2CV6 RHD, Dyane 6 RHD. Installed from year of construction 1970 to 1990
Overall length: 720mm. Note: Only for right hand drive!
Crankshaft for 2CV6. New part. We only import the crankshafts from South America, which are made on
the original tools and with the original materials (this factory produce the 2CV for the South American market). Attention, there are also cheaper crankshafts from China, but we do not offer them for quality reasons.
Crankshaft gear wheel narrowly, for Citroen AMI8 + 2CV6. 22 teeth. Gear-wide: 13,6mm. Wide one
completely: 15,6mm.
- Suitable for this article
Flashing - park light caps (2 fittings), for Labinal light. Suitable for Citroen 2CV, of year of
construction 09/1957 to 03/1963.
3848 Articles | Page 46 of 77
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
