for Citroën 2CV Alle
3858 Articles | Page 7 of 78
2CV, radiator grille, Emblen Citroen (Chevron) angle chrome-plated. As a replacement for plastic
radiator grilles. The Emblen Citroen (Chevron) angles are made of plastic. Diameter of mounting pins: 3,0 mm. Pin distance centred to centred: 29 mm.
2CV, radiator grille, Emblen Citroen (Chevron) angle chrome-plated. As a replacement for plastic
radiator grilles. The Emblen Citroen (Chevron) angles are made of plastic. Diameter of mounting pins: 3,7 mm. Pin distance centred to centred: 34 mm.
2CV, radiator grille, fly screen behind the radiator grille. Suitable for Citroen 2CV, from the
year of construction 1963 to 1969, first version after the corrugated metal bonnet. For radiator grille made of aluminium with large double angle (item no. 16096). This fly screen can also be used for 2CV6 up to the year of construction 1990.
2CV, Radiator grill, fly-screen behind the radiator grill. The fly-screen is reproduction made from
high-grade steel. Made in Germany.
2CV, Radiator grill, fly-screen in the bonnet, for Citroen 2CV starting from year of construction
1961. Simple reproduction. The grid must be painted. (Rust protection)
2CV, Radiator grill, winter protection simply. Material: Vinyl. The winter protection is hooked
only from the outside at the aluminum radiator grill. Suitable for Citroen 2CV, of year of construction 1963 to 1973. Note: Not suitable for radiator grill from synthetic!
Ventilation shutter seal rubber, for Citroen 2CV, all models. This rubber is a quality after
production, and corresponds to the original rubber.
Ventilation shutter 2CV to 1963/64. Without attachments. Linking of the ventilation shutter is
about centric! The seal and the trim are the same, than from the other 2CV. Made in Europe.
Ventilation shutter for Citroen 2CV. Reproduction from high-grade steel! The Ventilation shutter is
supplied without seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutters rubber seal (foam rubber), self adhesive, under the Ventilation shutter, at
the body. Suitable for Citroen 2CV.
Ventilation shutter completely (original), for Citroen 2CV. The Ventilation shutter is supplied
with seal and trim! The Ventilation shutter must paint before be adapted! Original Citroen, no reproduction!
Ventilation shutter completely, for Citroen 2CV. Reproduction out of sheet metal. The Ventilation
shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutter completely, for Citroen 2CV. Reproduction from high-grade steel! The
Ventilation shutter is supplied with seal and trim! The Ventilation shutter must be adapted at the vehicle, before it is painted.
Ventilation shutter aluminum strip, 2CV. The strip is a little more matte than the original. 12x
nut M3 (20166) are required!
Ventilation shutter trim from polished high-grade steel, suitable for Citroen 2CV. Own
reproduction. 12 x nut M3 are required. (20166)
2CV, ventilation flap, re-fitting grid for air distribution towards the driver. This ingenious
little grid redirects the airflow towards the driver when the ventilation flap is open. The grid is fitted within couple of minutes, using the clips supplied. So: ventilation system variable according to speed! We wouldn't want to do without it at high temperatures!
PDF FILE Ventilation shutter, pin for Ventilation shutter linking (without clamp), Citroen 2CV, for all
years of construction. Diameter: 5,0mm
Securing clip suitable for the Ventilation shutter, for Citroen 2CV. (Securement installing
handwheel at the Ventilation shutter)
2CV, brass bushings in pedal floor for standing brake pedal + clutch pedal (guide for the pedals in
the floor panel). Suitable for Citroen 2CV, AZU up to approx. year of construction 1970.
Bonnet out of sheet metal (Original), for Citroen 2CV starting from year of construction 1974. A
dispatch of the bonnet is not possible! Original Citroen, no reproduction!
Bonnet out of sheet metal, for Citroen 2CV starting from year of construction 1974. Reproduction! A
dispatch of the bonnet is not possible!
VIDEO 2CV, bonnet, insulation mat (Made in Germany), for Citroen 2CV, from model year 1961 to 1990. The
bonnet insulation mat is self-adhesive. Reproduction from Germany. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historical look). Our recommendation!
2CV, Bonnet, damming mat from material - felt. Not self adhesive. This bonnet insulating mat was
the first version, and installed from 1963 to about 1969.
2CV, bonnet: small insulation mat (self-adhesive). This small insulation mat was glued in front of
the large insulation mat in the last 3 years of production. The mat covers the area up to the radiator grille. It was only installed in the years 1988 to 1990. Primarily in Germany and Austria. The material is completely manufactured in Germany (state-of-the-art automotive technology, but with the original historic look). Of course, any other Citroen 2CV can be retrofitted with this mat. "Made in Germany" (material + punching).
2CV, Bonnet, rubber buffer small, for the base of the bonnet on the fender. The rubber buffers are
from the inside, in front, in the bonnet mounted.
2CV, Bonnet, retaining rubber (bearing) for the bonnet support, in front at the head light bracket
Suitable for Citroen 2CV starting from year of construction 1961. Citroen AMI6
2CV, Bonnet, retaining rubber suitable for the bonnet hinge rod, for Citroen 2CV. If the bonnet is
opened, the bonnet rod is hooked there.
Bonnet, retaining plate for the hood latching (first version). (the retaining plate is from
downside screwed on to the bonnet). Suitable for Citroen 2CV.
2CV, bonnet, retaining plate for the bonnet latching (final version to year of construction 1990)
(the retaining plate is from downside screwed on to the bonnet). Suitable for Citroen 2CV.
2CV, bonnet, catch completely. Suitable for Citroen 2CV, Installed from 1974 to 1990. The hook is
screwed onto the vehicle chassis. The hook is a South American version. Possibly the operating lever must be re-bent a little!
2CV, Bonnet, catch completely. Suitable for Citroen 2CV. Installed from 1961 to 1973. The hood
catch is screwed onto the chassis. Or.Nr. AZ86102
2CV, Bonnet, trim (aluminum) for the bonnet. Version AZAM. The trim is in the cross section easily
triangular. Length about 106cm. Wide one: 20mm. This trim fits on each 2CV starting from the year of construction 1963.
Bonnet, trim with mounting material. The trim fits on all Citroen 2CV bonnets starting from year of
construction 1961. Length about 93cm. The trim does not fit on the corrugated sheets bonnet!
2CV, bonnet hinge strip with repair sheet metal up to the Ventilation shutter. Suitable for Citroen
2CV. Good reproduction, like original. The sheet metal has the projection up to the ventilation shutter. Made in Europe.
2CV, engine bonnet hinge ledge, with repair sheet metal up to the Ventilation shutter. For Citroen
2CV. Simple reproduction. Made in Germany.
Nut in the door, for the securement of the door loop at the door, for Citroen 2CV. (All models with
high door linings and without plastic cover above).
2CV, pedal floor: Noise insulation mat on the pedal floor (as original). Self adhesive. Suitable
for Citroen 2CV with hanging pedals (until year of manufacture 1990). The insulation consists of 2 parts. First, the insulation layer is placed on the pedal floor. Then comes the heavy layer (modern bitumen, does not age, does not crack, UV-resistant, water-repellent, state-of-the-art automotive technology, but with the look of yesterday!) The heavy layer is heated slightly and then lays over the insulation. The material and manufacturing is completely "Made in Germany". The hole for the steering column must be made by yourself.
3858 Articles | Page 7 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
