for Citroën 2CV Alle
3852 Articles | Page 25 of 78
6-volt electronic flasher relay. Power output from 10 watts to 110 watts! Branded product. This
flasher relay is universally applicable for classic cars with 6-volt on-board voltage (Citroën 2CV, DS, HY, Renault R4, Renault with rear engines). It can also be used for operation with a trailer coupling!
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
PDF FILE 
Indicator-flash relay round, electromechanical. 12 volts, max. 4x21 watt. 3 poles X/P/L !!! This
flasher relay is electromechanical, not electronic! This makes it insensitive to voltage fluctuations and it still makes real click-click noises (like in the past). Suitable for Citroen 2CV, Dyane, Mehari, AMI, DS, HY. Peugeot + Renault. Power supply symbol (+, X or B). Connection turn signal front + rear = symbol ( C or L ). Connection indicator light dashboard = symbol ( R or P ). This flasher relay is made exclusively for us! Attention: Pay attention to the pin assignment of the relay. Do not simply change the plugs! The plug designation is also printed again on the housing!
VIDEO Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY
Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.
Pin 6 x 14mm, for the connection parking brake to the hand brake handle on the chassis. Suitable
for Citroen 2CV6. Or. No. A314 92
Pin, for the connection throttle control cable to the oval carburetor. Suitable for Citroen 2CV6
Length: 18,0mm. Diameter: 4,93mm. Or. No. AM142-67
Pin, for the connection parking brake lever in the interior. (On the engine side). Suitable for
Citroen 2CV. Measurement: 6x20mm.
Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the
brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!
Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper
nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.
Brake + hydraulic line (4,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper
nickel) line. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 4,5mm. This repair set should always lie in the luggage compartment.
Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to
bend simply. Kunifer does not rust). Clinch screws please specially order!
Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel
alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroen
2CV + Citroen DS. Or. Nr. A 5185
Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV +
Citroen DS. Or.Nr. ZC9438157U
Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring
plates that are mounted on the side of the brake shoes (e.g. our item number 13054).
Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Reproduction from Europe. Used
until year of construction 1990. On vehicles before year of construction 07/1968 the brake shoes were pressed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).
Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Original manufacturer quality
Made in Spain, Italy, fitted up to 1990. On vehicles built before 07/1968 the brake shoes were pushed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).
Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with
spring + plate, 2x safety sheet for eccentric, 2x spring bow for the brake shoes.
Brake shoes mounting set in front, suitable for Citroen 2CV (small drum in front, 200mm diameter)
Scope of delivery: 4x locking pin with spring + plate, 2x tension spring for the brake shoes.
Brake shoes mounting set in front, suitable for Citroen AK400, ACDY, Mehari, AMI6 (large drum in
front, 220mm diameter). Scope of delivery: 4x locking pin with spring + plates.
Brake shoes in front. Suitable for Citroen 2CV, of year of construction 06/1952 to 1982. (Vehicles
with drum brake at the front axle). Lining-wide about 35mm. 200mm diameter.
Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with
drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83
Brake shoe set rear, with wheel brake cylinders (piston 15,9mm). Suitable for Citroen 2CV4 + 2CV6
of year of construction 07/1981 to 1990. Dyane 6, AMI 8, Mehari. Brake system: LHM. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.
Brake shoe set rear, with wheel brake cylinders (piston 17,5mm). Suitable for Citroen 2CV4 + 2CV6
of year of construction 03/1970 to 06/1981. Dyane 4, AMI 6. Mehari. Brake system: DOT. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.
Brake shoe set in front, with wheel brake cylinders (piston 28,57mm). Suitable for Citroen 2CV4 +
2CV6, starting from year of construction 03/1970. Dyane 4. Brake system: DOT. Brand quality, no reproduction. Brake line connector: 8,0mm. For drum diameter: 200mm. Lining-wide: 36mm. Or. No. 95618228
Brake system repair set front, for Citroen 2CV6, consisting in only new spareparts. This set
enables to renew the complete front brake system: 2X new brake calipers, 1X brand brake discs, brand brake pads + hand brake pads and 1 liter LHM. 3x brake pipe seal.
Brake repair set small, if inadvertently DOT (incorrect) brake fluid used, instead of LHM
(correct). This set consists of all necessary rubbers + new brake calipers, master brake cylinder (Proprietary brand) + 2x wheel brake cylinders (ATE . For Citroen 2CV6 (with disc brake), if inadvertently normal brake fluid DOT were filled in. Note: Still much work, but the brake calipers, master brake cylinder and wheel brake cylinder are new parts!
Brake repair set small, if inadvertently DOT (incorrect) brake fluid used, instead of LHM
(correct). This set consists of all necessary rubbers + new wheel brake cylinders. For Citroen 2CV6 (with disc brake), if inadvertently normal brake fluid DOT were filled in. Note: Much work. The master brake cylinder + the brake calipers must be dismantled!
Brake system repair set rear, for Citroen 2CV6, complete to renew th rear brake system, consisting
in brand brake pads, 2X brand LHM wheel brake cylinder, 1X assembly kit for brake pads, 2X original nut, 2X grease cap.
Axle on the anchor plate, for the mounting from the lower eccentrics of the brake liners. Suitable
for Citroen 2CV. Or.Nr.: AZ 451 202A
Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV
and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
3852 Articles | Page 25 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
