Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
for Citroën 2CV Alle
3852 Articles | Page 43 of 78
Cable terminal strip, with 3 connection. Suitable for Citroen 11CV + 15CV. This terminal strip can
be also universal used. Optimally to connect the positive cables cleanly. Or. No. 710161
Headlight plug (with long connection cable + round plugs), for Bilux or H4 bulb. Suitable for
Citroen DS, Citroen 2CV, Citroen HY. Made in Germany.
Connector suitable for main headlights, for Citroen 2CV, Dyane, Ami6+8, HY. The plug is supplied
with short cable ends and round plugs.
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Box nut suitable for the securement of the wheel cover, for Citroen 2CV, Peugeot 204 + 304. The box
nut is pressed from the rear into the rim! Thread M10.
Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Citroen
2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip, 4x spring hinged tie bar adjustment from high-grade steel. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspension
pot hinged tie bar at the radius arm). Measurement: 45 x 14,29mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, galvanizes. Suitable for Citroen 2CV rear. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 45 x 14mm. Reproduction from South America.
Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12,21mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin small, galvanizes. Suitable for Citroen 2CV front. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12mm. Reproduction from South America.
Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle
pin largely, 2x triangle pin small, 8x clip. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84 + AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Grey edge protector, universal U-profile (with metal core). Sold by the metre. For clamping range
1-4 mm. Custom-cut items cannot be returned! This edge protector is, of course, also ideal for the 2CV's roll-top roof opening. But it is, of course, suitable for many classic French cars!
Red edge protector, universal U-profile (with metal core). Sold by the metre. For clamping range
1-4 mm. Custom-cut items cannot be returned! This edge protector is, of course, also ideal for the 2CV's roll-top roof opening. But it is, of course, suitable for many classic French cars!
Black edge protector, universal U-profile (with metal core). Sold by the metre. For clamping range
1-4 mm. Returns of custom-cut items are not accepted!
Edge protection, U-profile with felt lining on one side (with metal core). Sold by the metre
Maximum clamping range: 3 mm. This sliding edge protection is, of course, ideal for use wherever sliding windows are fitted! Cut to customer's specifications - no returns accepted!
Edge protection, universal U-profile (with metal core). Sold by the metre, 11 mm wide. For clamping
range 4-5 mm. Colour: black. Custom-cut items cannot be returned!
V-belt 10x625, suitable for Renault R4 (engine C1E + 688. 1108cc) generator. Citroen AMI 8 PREMIUM
Citroen CX, Citroen C25 for hydraulic pump! 625mm lengthens
V-belt 10x775mm. Suitable for Peugeot 304. Citroen Visa 0.6 (2 liners). Citroën AMI6 with M4
engine and small Ducellier alternating current alternator.
V-belt 10x800. Suitable for Peugeot 404. Citroen AMI 6, to year of construction 1963. Citroen BX
1.1 (generator), BX 1.6 + 1.9 (hydraulic pump), C25 (hydraulic pump).
License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4
Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany
License plate light cap (suitable for on the left, on the right + centrically) for Citroen 2CV to
year of construction 1963 + Citroen HY. The cap is supplied without lower seal and support.
License plate light cap centrically. Suitable for Citroen 2CV, to year of construction 1954. AZU
250 + HY (early years of construction, license plates above over tail gate)
License plate light complete (1x set = 1x left + 1x right). Suitable for Citroen 2CV until year of
construction 1963, AZU + HY. Colour: light grey. This set consists of 2 complete lights with bracket and seal.
License plate light completely, centrically ( separable license plates), for Citroen 2CV to year of
construction 1963 (diagonal tail sheet metal) + Citroen HY. Through seal and or paint from a side glass, can the light used also for on the left of or on the right. Colour: dark grey
Number plate light, with a black housing and flat mounting base. Suitable for Citroën AK, AZU
ACDY, HY, DS Break, Peugeot Pick Up...
Children's push 2CV (for learning to walk). Approx. 78cm long. Made entirely from wood. Made in the
EU. This cute 2CV is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
VIDEO Children's push Renault R4 (for learning to walk). Approx. 78cm long. Made entirely from wood. Made
in the EU. This cute R4 is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
3852 Articles | Page 43 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
