Drum rear, new part. 180mm diameter. Suitable for Citroen 2CV, Dyane, ACDY, Mehari. The drum is
supplied without wheel bearings. Or. No. 96995256
for Citroën 2CV Alle
3847 Articles | Page 28 of 77
Drum in front. Suitable for Citroen 2CV. 200mm diameter, 4x securement. The drum is outside ripping
(small drum, not suitable for 2CV Van). Per piece.
Drum in front. Suitable for Citroen 2CV. 200mm diameter, 6x securement. The drum is outside ripping
(small drum, not suitable for 2CV Van). Per piece.
Drum in front. Suitable for Citroen AK400, 350, AMI6, Dyane. 4 hole securement. 220mm diameter. The
drum is outside ripping. Or.No.: AM4516
Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for hydraulic brake systems
For lubricating cylinder liners and pistons. Extends the service life of brake cylinders. Protects against corrosion. Compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids. Keeps sleeves soft. Supports the installation of O-rings, lip seals, sleeves and other sealing elements made of rubber-elastic materials. Apply brake cylinder paste thinly and evenly on the surfaces to be lubricated. Attention: If you are installing a new wheel brake cylinder in your classic car, please coat the pistons and sleeves with this paste before installation. This will increase the longevity of the new brake parts on cars that are driven occasionally.
Charleston sticking set completely, red black, for 2CV Charleston up to year of construction 1983
1 version, with two-colored painted body! (yellow windshield frame, yellow Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier.
Charleston sticking set completely, yellow-black. 2Cv Charleston starting from 1984. Note: Sticking
set for completely black painted body! yellow = GDA, black = EXY.
Charleston sticking set completely, grey black, for 2CV Charleston to year of construction 1983! 1
version, with two-colored painted body! (grey windshield frame, grey Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier.
Charleston - Adhesive kit complete, grey-black, for 2CV Charleston from year of manufacture 1984
(plain black body). Colour numbers: AC057/GVP/EVP + AC099/GVR/EVR. Attention: This adhesive kit is as original, with the printed grey areas. No simplified reproduction of the contours without coloured areas! The painter does not have to paint the grey areas separately! We do not have the simple, cheap replica adhesive kits in our range.
Charleston sticking set completely, red black, for 2CV Charleston up to year of construction 1983
1 version, with two-colored painted body! (red windshield frame, red Triangle sheet metals A-post) Inclusive of the silver adhesive strips above at the doors and at the roof! Reproduction from the original Citroen supplier
Complete Charleston decal set, red and black, for Charleston models built from 1984 onwards
(Single-colour black body!) Colour number EKA + EXY. Unfortunately, the decal set is currently not available in the quality we require. We are working on a solution!
Chassis ACDY, reproduction, looks like original. Suitable for Citroen ACDY - Acadiane (Dyane van)
The chassis does not have TÜV (homologation) papers. Made in Europe. The chassis is visually and technically the same as the original chassis! The chassis are powder-coated!
Chassis AK400/350, reproduction, looks like original. Suitable for Citroen AK400 + AK350 (2CV van)
The chassis does not have TÜV (homologation) papers. Made in Europe. The chassis is visually and technically the same as the original chassis! The chassis are powder-coated!
Chassis drive shaft plate left (left wing), as replacement (to weld in) for the original Citroen
2CV chassis, from year of construction 05/1971. Or. No. AY721-106A
Chassis drive shaft plate right (right wing), as replacement (to weld in) for the original Citroen
2CV chassis, from year of construction 05/1971. Or. No. AY721-104B
Securement package largely for chassis 2CV6 with drum brake! Consisting of: 1x screw fixing set
body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x DOT brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
Securement package largely for chassis 2CV6 with disc brake! Consisting of: 1x screw fixing set
body on chassis, brake + fuel line brackets, 1x lasering of the chassis number into the chassis, 1x brake line set stainless steel, 1x LHM brake fluid, 4x threaded pipe fixing for suspension pot in chassis, 8x nut for threaded pipe, 4x locking plate for axle mounting screws, 1x grease tape 10 meter sealing body to chassis, 4x shock absorber bolts, 8x axle mounting screw
Chassis Citroen 2CV6 + 2CV4, Made in EU. This chassis is a very good reproduction, which
corresponds in all points to the original chassis of the last years of production. Naturally TÜV approved. It is manufactured in Belgium from electrolytically galvanised sheet metal. The chassis is then coated black in an immersion bath (cataphoresis). This provides much better rust protection than the original chassis. However, the weak points of the original chassis are of course still present (triple overlapping sheet metal etc.). Our own chassis with the number 15000 has a completely different design (without overlaps) and is hot-dip galvanised (i.e. subsequently dipped in hot liquid zinc). This chassis from Belgium was built from one-piece internal reinforcements. Cheap reproductions are built from composite sheet metal! Of course the chassis is TÜV approved. But please note point 3 in the certificate supplied! (You must first go to the registration office and apply for the modification and the allocation of the chassis number). So, if you want a chassis that looks like the original one, we can only really recommend this chassis! The chassis is suitable for vehicles with disc brakes and drum brakes! If you don't want it to look like the original, we recommend our own chassis with the number 15000 (Made in Germany, delivered over 6800 times)
Front cross member, as replacement (to be welded in) for the original Citroen 2CV chassis, from
year of construction 05/1971. Or. No. 6A 5411 280L
PDF FILE Chassis reinforcement in the chassis (oval plate), as a replacement (for welding in) for the
original Citroen 2CV chassis, from year of manufacture 05/1971.
Chassis galvanized (Made in Germany), for Citroen 2CV with drum brake. (The drum brake was
installed until 1982.) Identnr.: Seriennr:
Chassis, completely galvanized, 11 years guarantee! For Citroen 2CV. For vehicles with disc brake
ke. Made in Germany according to ISO 9001:2008, homolagated! - over 6800x delivery! Seasonally it can come to delivery times of up to 14 days! The chassis are produced here in our town Vechta. All threads were re-cut after galvanizing.
Choke cable old version, without light. Suitable for Citroen 2CV, Dyane, AMI6+8 until 1976, length
to 1500mm (can be shortened)
Choke cable with oval knob. Suitable for Citroen 11CV/15CV, starting from year of construction
07/1952. Length: 810mm. This choke cable can be installed also universal. Or. No. 723171
Choke cable, final version for Citroen 2CV + Dyane. For the square mounting. The choke cable is
illuminated! Or. No. 95597858
VIDEO Autosol chrome polish. 75 ml tube. (Premium chrome shine care). Autosol chrome polish has been
around for ages and has often been copied! Made in Germany.
Citroen emblem (Chevron) on the dashboard. Suitable for Citroen 11CV + 15CV, up to year of
construction 02/1952. Or. No. 802594. Dimension: 38 x 40mm. The emblem can also be used universal.
Emblem Citroen (Chevron) plastic, chromium-plates. Height of brackets about 55mm. Suitable
retaining tie-clip = 37264. The tie-clip is required 4x!
CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for
Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.
Pressure spring suitable for the idle air control adjusting screw, for Solex carburetor. For the
following carburetors: 26CBI, 28CBI, 30CBI (AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6
CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to
adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.
Cockpit screen on the right beside the speedometer, suitable for Citroen 2CV. The screen becomes
below Installed of the windshield wiper switch. For angular switch. Made in Germany.
Cocorico sticking set, for Citroen 2CV. Coorico was a special model in France, with white body and
the sticking set. The rear fenders and the Valence panels were colored painted.
Cocorico signature. Consisting of: 2x Cororico + 1x Citroen label. Suitable for Citroen 2CV
special design. There are only the emblems, not the lateral decoration set!
3847 Articles | Page 28 of 77
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
