for Citroën 2CV Alle

Screw set suitable for the engine cooling system, for Citroen 2CV6. Contants all screws and nuts to

mount the casing sheets and die sealing behind the oil cooler.

Engine fan case (for disc brake). Suitable for Citroen 2CV6, Dyane, AK, Mehari. Reproduction.

Engine fan case (for drum brake). Suitable for Citroen 2CV6, Dyane, AK, Mehari. Reproduction

Generator cover for Citroen 2CV6. (Cover on engine fan cases above). Or. No. AM532-60A

• Suitable for this article
• 
  V-belt 10x763mm. Suitable for Citroen 2CV6 + 2CV4, up to the year of
  7,14 €

Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol engine from 1950

5 Litre can. Mineral multi range motor oil for engine technology with oil filter from the fifties on. HTX 20W50 is positioning between soft alloyed one range motor oils and modern lubricants. HTX 20w50 provides motor best armoring for classic engines and warrants optimal oil pressure conditions also at high engine loading level. All seasons motor oil! Rust and corrosion protection for vehicles kept inactive for long periods of time.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Engine oil Castrol Classic 20W50, filled up in a beautiful sheet metal can. Special oil for classic

cars with petrol engine from 1950 ! 5,0 Litre can. Mineral multi range motor oil for engine technolgy with oil filter from the fifties on. Castrol Classic 20W50 is positioning beetween soft alloyed one range motor oils and modern lubricants. Castrol Classic 20w50 provides motor best armoring for classic engines and warrants optimal oil pressure conditions also at high engine loading level.All seasons motor oil ! Price per liter: EUR 11,78

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

HTX Prestige - Developed for classic cars built between the 1900s and 1950s. 5 Liter tin can. ELF

HTX Prestige is for classics from a bygone automotive era. HTX Prestige mineral engine lubricant has a high viscosity to ensure minimal oil loss and Multigrade technology to avoid low-temperature oil circulation issues. The oil is available at SAE 40 grade for vehicles built between 1900 and 1950 without an oil filter or cyclone separator (Citroen 11CV...........) Used oil should be chucked and recycled according to official prescriptions. Please bring used oil to collecting points for used oil recycling.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Label engine oil "TOTAL Altigrade". For 2CV, Dyane, DS, AMI

Label engine oil "TOTAL GT". For 2CV, Dyane, DS, AMI

Label engine oil "TOTAL". Dimension: 32 x 65mm.

Tie-clip for the engine cowling sheet metal, for Citroen 2CV (8 per side are required. (to it

suitable screw = 20170)

• Suitable for this article
• 
  Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2
  0,38 €

Engine cowling around the liner, above on the left (air circulation). Material sheet metal

Suitable for Citroen 2CV6

Engine cowling around the liner, above on the right (air circulation). Material sheet metal

Suitable for Citroen 2CV6

Engine cowling around the liner, down on the left (air circulation). Material sheet metal. Suitable

for Citroen 2CV6.

Engine cowling around the liner, down on the right (air circulation). Material sheet metal

Suitable for Citroen 2CV6.

Engine cowling set (4 pieces), for Citroen 2CV6. Reproduction out of sheet metal! (Air circulation

around liners).

• Suitable for this article
• 
  Tie-clip for the engine cowling sheet metal, for Citroen 2CV (8 per side are
  0,57 €
• 
  Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2
  0,38 €

Multimeter digital. Dimension: 74x145x40mm. Measuring range: Volt direct current + alternating

current. Ampere, resistance, continuity tester. Everything what you need, for car electrical connection.

Nut for the handwheel of the headlight adjustment and the Ventilation shutter. Suitable for Citroen

2CV. Heater adjustment for Citroen HY + DS19

Nut lock M12 x 1,25. Installed at shock absorber pins Citroen 2CV + at the tie rod of Citroen DS.

• Suitable for this article
• 
  Shock absorber pin at the suspension pot, suitable for Citroen 2CV. 12mm thread
  12,79 €
• 
  Shock absorber pin - disk heavily, suitable for Citroen 2CV (12mm). Or.Nr
  4,71 €
• 
  Shock absorber pin - washer, small version. Suitable for Citroen 2CV with 12mm
  0,94 €
• 
  Shock absorber pin - washer, medium version. Suitable for Citroen 2CV with 12mm
  1,88 €

Nut selflocking M14 x 1,5. Installed at shock absorber pin (14mm) Citroen AK, ACDY, AMI.

Nut in front for the layshaft, in the gearbox. Suitable for Citroen 2CV4 + 2CV6. Thread size

M20x1.5

Retrofit kit for a door contact switch, suitable for Citroen 2CV6. The switch switches the positive

cable to the interior light. Contents: retaining plate, switch, installation instructions. The retrofit kit is attached to the existing screws of the door hinge!

Add-on kit for door contact switch for Citroen 2CV AZAM! Such a switch belonged to the standard

equipment of the 2 CV AZAM in the Sixties (connection to the interior lighting over 2 cables). Switching over earth cable! Not for standard 2CV with earth over car body. Made in Germany.

Needle bearing suitable for the primary shaft, for Citroen 2CV, Inside diameter: 14,5mm, outside

e diameter: 20mm. Height of 26,5mm. Or.Nr. ZC9620373

Needle bearing gearbox, suitable for Citroen 2CV. Measurement: 29.5 x 33.5 x 18,2mm. Or.Nr

ZC9620361

Needle bearing between jackshaft + sliding sleeve 4th gear. Suitable for Citroen 2CV6. Dimension

19 x 23 x 17mm.

Needle bearing cage, for transmission shaft. Suitable for Citroen 2CV6. Per piece. Or.Nr.26202299

Sewing thread for outdoor use, for soft tops and sunroofs. 100% polyester continuous filament

Length: 3000 metres. Strength: 40. UV resistant, high tensile strength + low stretch, high abrasion resistance, washable and resistant to chemicals. Recommended needle size: 120-140.

Fog tail light, Hella. The is made from black plastic. Universal fitting. Width: 125mm. Height

84mm.

Fog tail light, manufacturer Hella. Chromed metal housing. Universal fitting.

Camshaft spring. The spring is mounted in the camshaft drive gear (camshaft gear). The springs

compensate the tooth flank play! Suitable for Citroen 2CV6, AK, ACDY, Dyane, Mehari, AMI. Or. No. A122-98. Diameter: 10.5mm. Length: 21mm.

Camshaft completely with bearings. Suitable Citroen for 2CV6. Original Citroen, no reproduction! We

could find a stock, with supported over 400 original camshafts. These are now in our existence.

O-Ring Assortment, 386 pcs. 32 sizes R-01 - R-32, inner-ø 3-44 mm, oil-, petrol- and

acid-resistant. Made in Germany.

• Suitable for this article
• 
  Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën
  8,83 €

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw thread repair set for the following threads: M10x1.5, M12x1.5, M14x1.5, M16x1.5. 64

pieces. Scope of delivery: 4x tap drill, 5x plug screw for each thread size, 10x sealing ring for each thread size.

Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm

(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6

• Suitable for this article
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil

drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil drain screw tool nut. Square 13,1mm. 3/8 ratchets mounting. Suitable for Peugeot + Renault.

Oil draining pump 12 Volt. Ideal for emptying the hydraulic tank. For example Citroen DS, CX, GS

etc.. Of course other huiles oils can also be pumped with it. Super practical.

Oil absorbent pad. Extremely absorbent. Dimension: 51x38cm. For oils and brake fluids. Attention

the pads do not suck and absorb water! Your wife will be grateful!

Oil pressure switch for Citroen 2CV starting from year of construction 1965. Response pressure 0,50

0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.

Oil pressure switch for Citroen 2CV6, Installed starting from year of construction 1965. Response

pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.

Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil

filters! Thread: M14x1,5.

Oil pressure valve - ball for Citroen 2CV6. Installed starting from year of construction 1973. Per

piece.

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (12,20mm long).

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (16,30mm long).