Electrical wiring harness universal, for tow trailer coupling. Note: Only cables + socket! Without
t flasher, without control light. 7 cores.
for Citroën 2CV Alle
3864 Articles | Page 33 of 78
Electronic ignition system 12 Volt - reproduction! Suitable for Citroen 2CV6. This ignition system
is a reproduction. It is not of the same high quality (both in terms of workmanship and the components used) as our 14300 ignition system, but this reproduction ignition system is still interesting for those who don't drive much. Because it is much better than the normal contact and condenser controlled ignition! It's your decision! However, we ourselves continue to ride with the 14300 ignition system, which has never let us down for over 18 years!
The '123\EVO' replaces the former 123\BLUE and is a further development. ( 123\EVOLUTIF ) It offers
rs many different advance curves, 5 for tuning with regular fuel, 5 for tuning with LPG/ethanol and 5 'standard'-curves as prescribed by Citroen for ALL two cyl.-engines, inclusive VISA-engines. The 123\EVO also offers : vacuum-advance, warm-up-advance, overheat-retard, spark-balancing, dwell-balancing, current-time-out, idle-speed-control.
PDF FILE 
Electronic ignition system 12 Volt. For Citroen 2CV6. This electronic ignition system is very easy
to install and no longer has any mechanical components that can wear out. There is no need for any maintenance work on the ignition. You will be thrilled! We have already sold more than 10000 systems. And if you want your 2CV to run even better, we recommend our ignition coil 14395. The ignition system is designed for original engines. (A79/1, M28, M28/1 engines).
Ignition coil special kit for 2CV. High-performance ignition coil, special for 2CV. This
hign-performance ignition coil "made by Franzose" is the solution to the well known problem of defective 2 cv ignition coil. No more bucking! No need anymore to have on bord an ignition coil for replacement! This high-performance ignition coil works in combination with electronic ignition (14300) as well as with ignition contacts warranting in both cases a reliable operating. A further advantage of this high-performance ignition coil is a much better start. This high-performance ignition coil has by 10 volts the same output as the normal ignition coil by 14 volts- This enables a much better start. When starting vehicle electrical system voltage decreases till approx.9-10 volts. At this level the high-performance ignition coil is already highly efficient. Because there is no high-resistance oil anymore between the primary wave and the secondary wave and thanks to safe plastic used this high-performance ignition coil has a long life expectancy. Content: mounting bracket, 2x ignition cable, 2x NGK ignition plug. CAUTION:our ignition coil is only compatible with our electronic ignition systems (items n°14300 + 14325). Other electronic ignition systems work with a different resistance what can destroy the ignition coil!
Ignition 123UNI is designed for all STANDARD 2CV, Dyane, AMI engines that were ever produced. The
appropriate advance-curve can be selected with a 16 position rotary-switch, behind an opening in the front of the housing. The unit will work on 6 Volt and on 12 Volt systems. The '123\UNI' is designed to work on '2CV' 9 hp, 375cc, A53, M4, A79/0, M28, A79/1 and M28/1 engines in conjunction with the stock black coil. (6 Volt type for 6 Volt battery, and 12 Volt type for 12 Volt battery) The dwell is automatically adjusted. Upon installation, the user has to check his engine plate ( "A", "AZ", "AM", "AYA", "AM2", "AYA2", "AK2", "A06/635", "A06/642", "AM2A" or "A06/664" ) and look in the manual which setting of the rotary-switch is appropriate. There also is a special setting for M28/1-engines running on LPG or on Ethanol, like 'E85' as used in Sweden. ( 'E85' contains 85 percent ethanol, and 15 percent standard fuel )
Emblem "2CV Charleston" as sticker. Colour: silver with transparent lettering (can be used for the
red/black + yellow/black Charleston).
Bleeder screw M7x1. Original reproduction! Suitable for Citroen DS, SM, CX, 2CV, etc.. (for DS only
for the wheel brake cylinders, not for the brake pliers)
Vent screw M7x1. Universal suitable for many Citroen, Peugeot, Renault. Length: 22mm. Particularly
suitable for the wheel brake cylinders, for Citroen 2CV with a dual circuit brake system.
Spare parts catalogue 2CV et Fourgonnettte 250k, No. 446 models 49-68, edition 68 approx. 300
pages, German, English, French.
M9x34 screw, for the securement of the parking brake exenter at the brake caliper. Suitable for
Citroen 2CV, starting from year of construction 1981.
Support - lamp securement for tail lamp, Citroen 2CV with diagonal tail sheet metal. Reproduction
adaptation work are possibly necessary.
Spring for the adjusting lever for the seat lengthwise adjustment on the left (single seat + seat
bench). Suitable for Citroen 2CV.
Spring for the adjusting lever for the seat lengthwise adjustment on the right (single seat + seat
bench). Suitable for Citroen 2CV.
Spring for the Choke flap in the carburetor. (oval carburetor). Dimension: 0,5 x 4,5 x 20mm
Suitable for Citroen 2CV6.
Spring suitable for the gear lever in the old gearbox, for Citroen 2CV from the fifties + sixties
es (gearbox shifter rod is rear at the gearbox). The spring is mounted under the gearbox cap. Or.Nr.A33497
Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV
starting from year of construction 11/1971. Or.Nr.: AY4311
Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV
starting from year of construction 11/1971.
Spring between the hand brake handles, at the brake caliper. Suitable for Citroen 2CV starting from
year of construction 1981.
3864 Articles | Page 33 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
