Citroen-2CV / Alle / clutch

Clutch release yoke axle (in the transmission bell housing), suitable for Citroen 2CV6. Length: 125mm.

Quality: 4

Clutch release lever spring. (Clutch). Reproduction. Suitable for CITROEN 2CV6, starting from year of construction 1981. Or.Nr.: AM314-9.

Quality: 4

Clutch release yoke for the clutch. Old version (first 602cc version), suitable for Citroen 2CV, Dyane, AMI. Or.Nr.: AM314.4

Quality: 4

Clutch release yoke for the clutch. Suitable for 2CV6 + 4, final version, starting from year of construction 03/1982.

Quality: 4

• Suitable for this article
• Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroe
  2,33 €

Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroen 2CV4 + 2CV6.

Quality: 4

Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.

Quality: 3

Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch with 3 levers. The graphitic ring has 52mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or.Nr.: AZ 314.01

Quality: 3

Clutch release sleeve 2CV6 + 2CV4, Installed of year of construction 1970 to 1982. Reproduction.

Quality: 4

Clutch release sleeve 2CV6, Installed starting from year of construction 02/1982. Reproduction. Made in Europe

Quality: 4

Clutch release sleeve for Citroen 2CV6, starting from year of construction 02/1982. Original Valeo.

Quality: 2 360°

Clutch release sleeve locking spring, for Citroen 2CV6 starting from year of construction 02/1982.

Quality: 4

Release ring clutch, for all Citroen 2CV + AMi + Dyane, which have the clutch release yoke above in the transmission bell housing. (2CV with 9, 12 + 16 HP) of Or.Nr.: A31414

Quality: 0

Centrifugal clutch bearing for 2CV6+4, measurement: 17x40x12mm, Inside diameter: 17mm, outside diameter: 40mm, overall height: 12mm. Or.Nr.: ZC9620103

Quality: 2

Centrifugal clutch, check disk for Citroen 2CV. 2,8mm (17x22mm). Or.Nr. AZ33299A

Quality: 4

Centrifugal clutch, check disk for Citroen 2CV. 3,3mm (17x22mm). Or.Nr. AZ33299D / AZL6

Quality: 4

Centrifugal clutch, nut for the bearing. Reproduction. Suitable for Citroen 2CV. Measurement: 16x150mm. Or.Nr. A332 5, AZL6

Quality: 4

Centrifugal clutch, retaining ring. Diameter 42mm, 1,4mm heavily. Suitable for Citroen 2CV. Or.Nr.: AZ312-87

Quality: 4

Centrifugal clutch ring with friction linings. Lining-wide 17,5mm. Suitable for Citroen 2CV with centrifugal clutch.

Quality: 4

Centrifugal clutch ring with friction linings. Lining-wide 26mm. Suitable for Citroen 2CV6 with centrifugal clutch. Or.Nr.: AM312-7, AZL6

Quality: 4

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, with being pedals. Piston diameter: 22mm. Brake line connector: 1x M12x1 + 1x M10x1mm. Connection brake fluid reservoir: M16. Very rare export version! This master brake cylinder was used also as clutch master cylinder at 2CV Sahara!

Quality: 4 360°

• Suitable for this article
• Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.
  0,51 €
• Brake hose copper sealing ring. Dimension: 10 x 16 x 1mm.
  0,51 €
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Clutch set for 2CV old, from 1952 to 1955, clutch disk with 8 splines. Reproduction, normal gear shift. 160mm diameter.

Quality: 4

Clutch set for 2CV old, from 1955 to 1966, clutch disk with 10 splines, centrifugal clutch, reproduction. 160mm diameter. Note: The clutch must be adjusted after Citroen work instruction!

Quality: 4 Pdf

Clutch set for 2CV old, from 1955 to 1966, clutch disk with 10 splines. Normal gear shift. Reproduction. 160mm diameter. Made in EU

Quality: 3

Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with drum brake in front). Dyane of year of construction 1968 to 1982. Mehari from 1968 to 1982. The clutch set consists of: Pressure plate (3 levers) clutch disk and clutch release sleeve. Reproduction, made in Europe. Note: The clutch must be adjusted after Citroen work instruction A.312-00!

Quality: 3 Pdf

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
  0,37 €

Clutch set for Citroen 2CV6+4, of year of construction 1970 to 1982. Change of three fingers pressure plate on multi-disk. Completely with clutch release sleeve. (Pressure on the pedal is lower)

Quality: 3

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
  0,37 €

Clutch set for Citroen 2CV6, starting from 02/1982, with torsion bars. The new clutch disk with torsion bars prevents starting acceleration bucking by e.g. light axial runout of the fly wheel or pressure plate. 160mm diameter, 18 teeth.

Quality: 1

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,46 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €
• Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We
  158,57 €

Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in front). Dyane 6, starting from year of construction 1982. Mehari, of year of construction 4/1982 to 1990. Manufacturer: Valeo. 18 teeth, diameters: 160mm. (Multi-disk) new part.

Quality: 2

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,46 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €
• Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We
  158,57 €

Clutch set for Citroen 2CV6, starting from year of construction 03/1982. Reproduction, Made one in European Union. 18 teeth, diameters: 160mm. (Multi-disk) new part.

Quality: 4

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €

Clutch disk centrifugal clutch. Suitable for Citroen 2CV starting from year of construction 04/1966. 160mm diameter. 18 teeth. Or.Nr.AZ313-01C

Quality: 3

Clutch disk for 2CV, from year of construction 1952 to 1955. 8 teeth.

Quality: 4

Clutch disk for 2CV, of year of construction 1952 to 1963. 10 teeth, inside diameters: 20/17mm.

Quality: 4

Clutch disk for 2CV, of year of construction 1955 to 1966. 10 teeth. Diameter: 160mm. Suitable for centrifugal clutch.

Quality: 4

Clutch disk starting from 02/1982. Suitable for Citroen 2CV6.

Quality: 4

Clutch disk, starting from year of construction 03/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Quality: 2

Clutch disk, to year of construction 02/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Quality: 2

Centring (from synthetic) for the clutch. Suitable for Citroen 2CV

Quality: 3

Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)

Quality: 1

M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for Citroen 2CV6 + 2CV4, to year of construction 1981.

Quality: 3

M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for Citroen 2CV6, starting from year of construction 1981.

Quality: 3