Hydraulic line seal 6,35mm, for LHM (green) hydraulic system. 10mm outside diameter! About 10mm
long. Suitable for Citroen DS, CX, GS, SM, BX, XM etc.
for Citroën HY
1695 Articles | Page 15 of 34
Hydraulic hose rubber 4.5 mm LHS (red) + normal brake fluid DOT3 + DOT4. Top quality (new improved
reproduction made from EPDM). Suitable for Citroen DS with LHS hydraulic system, Citroen HY + 2CV, AMI with 4.5 mm brake line (9 mm screw connection).
Hydraulic line rubber 6,35mm, LHM (green), 10mm outside diameter! About 8mm long. Suitable for
Citroen DS, CX, GS, SM, BX, XM etc.
Hydraulic line rubber 6,35mm, LHS (red). 10mm outside diameter! Suitable for Citroen DS, with LHS
hydraulic system.
- Suitable for this article
Hydraulic line rubber 6,35mm. LHS (red). 12mm outside diameter. About 10mm long. Only suitable for
Citroen DS, with LHS hydraulic system. This heavy rubber is for the connection at the brake system accumulator. Or. No. D392-9020
- Suitable for this article
Hydraulic pump bearing. Suitable for Citroen DS. Diameter: 50 mm. Inner diameter: 12 mm. Thickness
16 mm. Or. No. ZC9620073U
Hydraulic pump sealing set (7 pistons pump). Hydraulic system LHM. Suitable for Citroen DS + SM
For hydraulic pumps with 2 + 3 V-belts.
Interior light for Citroen AMI8, ACDY, Dyane. Citroen HY. Note: A lot of different lamps were
obstructed, please compare the pictures. Or. No. AM 545-03C
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m
PDF FILE Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m
Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m
Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m
Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end
of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m
Interior hinge strip (Male) Citroen HY. The hinge has a longer welding sheet metal. For the bonnet
doors, side flaps, rear flap. 145cm lengthens. Accurate reproduction of the original hinge strip. This part of the hinge is welded at doors, hood and the bonnet. The hinges are manufactured in complex manual work in the European Union.
Interior hinge strip (Male) Citroen HY. For the bonnet, doors, side flaps, rear flap. 145cm
lengthens. Reproduction of the original hinge strip. This part of the hinge is welded at flaps and the bonnet. For the doors this hinge is body-laterally welded. The hinges are manufactured in complex manual work in the European Union.
Interior hinge strip (Male) Citroen HY. Particularly produced for the rear doors, if the side
panels were exchanged. The hinge has an additional bending. Thus a repair is substantially simpler. Length: 145cm.
Inside mirror chromium-plates. Dimension about: 125 x 55mm. The mirror does not have a fixture
only a moving threaded bolt with M5 thread.
Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal
fitting. Made in Germany.
Instrument fixture (made of metal) for 1 additional instrument with 52mm diameter. Universal
fitting. Made in Germany.
Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable
harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citro
Radiator (in the exchange), suitable for Citroen HY petrol, starting from year of construction
1966. Made in Germany. The radiator is completely dismantled and cleaned. Radiator glass blasting, radiator core renew, radiators checked for tightness and radiators completely painted. Plus 250 Euro Old part deposit.
Coolant hose on the right, suitable for Citroen HY, all years of construction. Overall length about
340mm. 40mm connection. Or.Nr. H2351
Radiator hose (water hose) on the left. Suitable for Citroen HY, all years of construction
Connection: both sides 40,0mm. Or. No. H235-3B
Radiator hose above. Suitable for Citroen HY, starting from year of construction 1963. Connection
diameter: 60,0 + 40,0mm, outside diameter: 70,0 + 50,0mm. Or. Nr.HY2353
Radiator cap, for Peugeot Diesels + Citroen HY Diesel. Suitable for Peugeot 204 D, 304 D, 404 D
504 D, 505 D, 604 D. diameters: 56mm. Pressure disk diameter: 39mm.
Radiator cap, suitable for Citroen DS, to year of construction 07/1972 + HY (petrol) starting from
year of construction 1963. 0.28 atue. All Citroen DS, without radiator expansions tank. Cap internal dimension = 57mm. The sealing rubber has a diameter of 38mm. Above in the cap is no seal. (all vehicles without compensating tank do not have above in the cap a seal. All vehicles with expansion tank have a seal). Or. No. 5418102N
Radiator hose connecting piece, under the water pump (connection at the engine block). Suitable for
Citroen HY. Or. No. HY235-87
Radiator hose down, suitable for Citroen HY Indenor Diesel. Inside diameter: 38, mm on the side
with one connection. 43,0 + 15,5mm on the other side. Or. No. HG235-1
Descaling agent for radiators. For decalcifying of copper and aluminium radiators. Use: mix 1 kg
softening agent in 10 liters warm water. After Draining of cooling water fill in radiator with decalcifying: After driving (1-2 days)please drain softening agent water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Degreaser for radiator. For cleaning and degreasing of copper and aluminium radiators. Use: mix 1
kg degreaser in 10 liters warm water. After draining of cooling water fill in radiator with degreasing water: After driving (1-2 days)please drain degreasing water and flush the cooling system with hot water before refilling it. Caution: the cleaning process may uncover some leakages!
Radiator (in the exchange), suitable for Citroen HY, from year of construction 1963 to 1966. Made
in Germany. The radiator is completely dismantled and cleaned. Radiator glass blasting, radiator core renew, radiators checked for tightness and radiators completely painted. Plus 250 Euro Old part deposit.
Radiator (in the exchange), suitable for Citroen HY petrol, to year of construction 1958. Made in
Germany. The radiator is completely dismantled and cleaned. Radiator glass blasting, radiator core renew, radiators checked for tightness and radiators completely painted. Plus 250 Euro Old part deposit.
Radiator hose (water hose), for inlet and outlet of the heater radiator (heat exchanger). Suitable
for Citroen HY. Length: 1000mm. Inside diameter: 15mm.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
1695 Articles | Page 15 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
