for Citroën HY
1695 Articles | Page 25 of 34
Spare wheel flap, suitable for Citroen HY. Reproduction from GRP (synthetic) and metal fixtures
Made one in European Union.
Ring seal under that bearing block from the inlet rocker arm shaft. Suitable for Citroen DS +
Citroen HY. Dimension: Measurements: 8.9 x 14.3 x 2,7mm. Made in Germany.
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were
e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
Cable harness color markings (100 item), for plugs with 4mm diameter. 9 different colors. Suitable
for Citroen 2CV, DS, HY, SM, GS, CX, Peugeot
Switch - push button, square, with chrome frame. Universally suitable. Please note: this is a push
button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Square switch with chrome frame. The switch also has an indicator light (bulb base Ba9s). Universal
switch for e.g. heater blowers, additional consumers.... Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Discs (windscreen) Pull-in tool (cord with handle). This is used to pull the rubber lip of the seal
over the sheet metal fold. Very helpful!
Windscreens (windscreen) piping assembly tool - bracket inserts. For small piping. There are 5
brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.
Windscreen Installation Tool Set. Windshield sealing trim assembly tool. With this tools will the
rubber lip (seal) inclination (spread) and it can fit the sealing trim at the same time. Attention: The tool is for very wide piping. For chrome piping e.g. Citroen 2CV, Renault R4 etc. small brackets must be fitted. See our item number 20137.
Permanently elastic window sealant. Original Teroson! 75ml tube. Application : Ideal for sealing
rubber-mounted front, rear and side windows. Very stable, water resistant, remains elastic. Good adhesion even on damp windscreens.
Vehicle Window sealant permanent elastic. Original Teroson! Cartouche 310ml. Application: Ideally
to sealing rubber-mounted front. - Tail and side windows. Very stably, water-resistant, remains elastic. Good adhesion also on wet disk.
Window seal vertical, between the sliding and the fixed glass pane. For the door in front (1 side
with velvet). Suitable for Citroen HY, starting from year of construction 01/1968. Or. No. HY961-51A
Washer reservoir, rubber bushing above in the cap (for the hose). Suitable for Citroen DS, HY, 2CV
etc. dimension: 5 x 18 x 4mm.
Washer reservoir electrical with built-in set for 2CV and other classical cars. Complete with
h push-button, cable, cross bars etc. very practical and small. Width 19,5cm, height of 16,5cm, depth 5,5cm
Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L. width: 122mm
overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
Windscreen washer reservoir - plastic bag with integrated electric water pump. 12 volts. The
reservoir is supplied with mounting and accessories and can be installed in any vehicle, e.g. Citroen Mehari, Renault R4 first versions, etc. This type of windscreen washer reservoir has also been installed in many Italian vehicles (Alfa Romeo Spider...).
Wiper system nozzles - lower part, from brass. With additional connection for a hose. Suitable for
Citroen DS, to year of construction 1969. In addition, this additional connection is very practical for Citroen DS, HY etc.. Mounting hole: 7,0mm.
Wiper system nozzles - upper part (with one water ejection nozzle)! Suitable for 2CV, Dyane, HY, DS
S (DS Installed to year of construction 1969!). M 7x1mm
Wiper system nozzle from grey synthetic. Suitable for Citroen HY. This nozzle is optically near at
the original! Mounting diameter: 8,0mm.
Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The washer nozzle is
screwed with a nut from behind. 2x water jet. Flat design.. Mounting diameter: 8,0mm.
1695 Articles | Page 25 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
