for Peugeot Sonstige-Peugeot

Festoon bulb 18W, 12 Volt. 2CV for side indicator C-pillar. 15x43mm. Base SV8.5

Sofitte 12 V, 5 Watts. 11x38mm, base SV8,5. e.g. back lights Peugeot 203 Pik Up.....

Festoon bulb 5W, 12 Volt. 11x43mm. Base SV8.5

Sofitte 6 V, 10 Watts. 11x38mm, base SV8,5. e.g. back lights Citroen 11CV.

Festoon bulb, 6 volt, 10W, measure: 11x43mm, SV8,5

Festoon bulb 6 volt 18 W. 15x44mm. Base SV8.5

Sofitte 6 V, 5 Watts. 11x38mm, base SV8,5.

Festoon bulb 6 Volt, 5 Watt. 11x43mm. Base SV8.5

Mirror flexibly, with joint. 360mm lengthens. Mirror diameter 30mm.

Mirror Classic chromium-plates. Completely producef from metal. Mounting foot lengthens: 165mm

Hole spacing securement: 90mm. Diameter mirror glass: 110mm. Very solid version.

Mirror seal down, for CIPA mirror.

Mirror Lucas Classic, on the left (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the right). Diameter: about 105mm.

Mirror Lucas Classic, on the right (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the left). Diameter: about 105mm. Mounting thread: M8

Mirror approximately. The mirror is wedged at the door or the roof. Diameter: 100mm. Strongly

curved fixture. Completely made of metal.

Mirror round. Diameter: 120mm. Hole spacing for the screwed joint: about 104mm.

Mirror round. Diameter: about 105mm. Completely made of metal. Very beautiful small mirror

Mounting holes center - center: 47mm.

Mirror SPORT. Mounting on the fender. Diameter: 100mm. Completely made of metal. Typical, sporty

mirror from and the fifties and sixties.

Mirror Talbot. Completely made of anodized metal. Typical Talbot mirror, for mounting on the

fender. Diameter: about 95mm.

Mirror for clamping to the door. Made entirely of metal. Typical door mirror, as often used in the

1940s and 1950s (Citroen 11CV, Peugeot, Renault). Diameter: approx. 95 mm. Suitable for left and right!

Mirrors to attach at the door. Completely made of metal. Typical door mirror, how it installed very

often in the forties and fifties. Diameter: about 100mm.

Mirror head Peugeot J7, without mirrorarm. Measure: 150x245mm. Made in France

Cotter Pin Assortment, 555 pcs

Inclination rivet 3mm.

Circlips (shaft retaining rings) range 3-32mm. Outside! 300 pieces!

Circlips (shaft retaining rings) range 3-32mm, inside. 300 pieces!

Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High

adhesive. We have been searching for a long time since we found a really good one.

heat-resistant spray paint till 650°C 400ml, colour silver

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C 400ml, colour anthracite

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C, 400ml, colour black

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Tie rod end splitter (max. 23 mm fitment), workshop quality.

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also suitable

for other vehicles with 1,25 inch piston. (30,75mm)

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 3/4 inch (19,05mm). Suitable for Citroen HY

Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY

11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

stone guard MOTIP, colour grey for spray gun, 1000ml

Actuator for door locking (operation of the pull rod in the lock). Suitable for Peugeot 205, 106

206, 306, 309, 405, 406, 806, Expert 1 + 2. Citroen: AX, BX, C15, Evasion, Jumpy 1 + 2, Xantia 1 + 2, XM 1 + 2. Or. No. 6615.02

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For

simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Rear shock absorbers (2 pieces). Suitable for Peugeot D4A (delivery van), from the year of

construction 1959 to 1964. Extended length of the shock absorbers: 44.5 cm. Compressed length: 27 cm.

Shock absorber in front Peugeot D4A (2 fittings). (Delivery van) 1959>1964.

Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot

504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!

Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot

404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08