for Peugeot Sonstige-Peugeot
1045 Articles | Page 9 of 21
Plastic line (nylon) between clutch taking cylinder and clutch master cylinder (without ends)
Outside diameter: 6,3mm. Inside diameter: 4,3mm. By meters. Suitable for Peugeot 204, 304, 404, 504, 505, 604. Only use DOT3 + DOT4 (never use DOT5 or DOT5.1!).
Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without
pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)
Clutch line sealing ring (for the line between clutch taker + clutch transmitter). Suitable for
Peugeot 204, 304, 404, 504, 505, J7. Dimension: 6.5 x 10.2 x 7.5 mm. Or. No. 2091.03
Clutch line support sleeve. Inside diameter: 4,0mm. Suitable for Peugeot 204, 304, 404, 504, 505
J7. This sleeve is inserted to the end of the clutch line!
Clutch line screwed joint. Thread: M12x1. Inside diameter: 6,5mm. Suitable for Peugeot 204, 304
404, 504, 505, J7. Or. No. 2091.01. Note: There was plastic line with 6,3mm, 7,0mm + 7,3mm diameter. If necessary rebore the screw on that suitable diameter.
Lamp plug that comes on the Bilux or H4 bulb. The plug also has a socket for a Sofitte at the same
time. If a vehicle needs to be retrofitted with parking lights, this plug can be used. Just drill a hole in the reflector, lay a new cable and you're done. Universal fitting!
PDF FILE Generators battery charging regulators, for direct current. 12 V. 3 connections (D+/61, DF, B+)
Ground on housing. Substitute Ducellier. Maximum 360 Watts! 30 ampere. Was away mounting holes: 125mm. Manufacturer: Bosch
Generator Brush Set, for Paris Rhone A13M12. Suitable for Peugeot, Renault, Citroen (2CV, DS)
Length: 19mm. Thickness: 5mm. Height: 7mm.
VIDEO 
Ligarex, specially pliers for clip strap (bellow straps). This securement was used at many French
classic cars, for all kind of hose securement, like radiator hoses, collars, rubber bellows of the heating etc. With Ligarex you re-establish the original optics and you have always the suitable length in the workshop!
Air filter A518 for AX/C15/SA/XS/ZX/ 106/205/306/309/4057/Talbot. Outer diameter: 136mm, inner
diameter: 65mm, height: 217mm.
Air filter A699, for Citroen VISA GTI, Peugeot 205 GTI, 205 Rally, 309 GTI. Outside diameter 115mm
inside diameter of 75mm, height of 250mm.
Air filter A973, Citroen AX, BX, ZX, C15, Berlingo, Peugeot 106, 205, 306, 405. Only petrols
Outside diameter 141mm, inside diameter of 119mm, height of 163mm.
Air filter oil 0.5 liters. To apply on wire and foam material air filters. (These air filters must
be sprayed with oil, because they have then only the correct filter performance).
M10, copper nut (wrench 15mm) for connection Y-pipe (elbow pipe) at the exhaust elbow. Suitable for
Peugeot 204, 304, 404, 504, 505, 604, J7
M5x20, pitch 0,75! Screw stainless steel. Note: This screw has a 0.75 pitch, as it was originally
installed from Citroen, at the beginning of the seventies (S.i.m). Today's screws have 0,80 pitch! (ISO)
1045 Articles | Page 9 of 21
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
