for Renault 504-604

Mirror Classic chromium-plates. Completely producef from metal. Mounting foot lengthens: 165mm

Hole spacing securement: 90mm. Diameter mirror glass: 110mm. Very solid version.

Mirror seal down, for CIPA mirror.

Mirror on the left, chromium-plates. Original French manufacturer "CIPA". Suitable for Peugeot 204

404, 504. Renault R4 to year of construction 1985. R5, R8, R10, R16 etc. Hole measurement: 65,5mm. Dimension mirror glass: 163 x 111mm. Made in France

Mirror on the left, chromium-plates. Original French manufacturer "CIPA". Suitable for Peugeot 404

504. Renault R4, R5, R8, R16 etc. Hole spacing: 65,5mm. Mirror measurement: 90x140mm. Made in France

Mirror Lucas Classic, on the left (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the right). Diameter: about 105mm.

Mirror Lucas Classic, on the right (with horizontal fender mounting). Completely made of metal

Typical English Lucas mirror, for horizontal mounting on the fender or the door (then on the left). Diameter: about 105mm. Mounting thread: M8

Mirror round. Diameter: 120mm. Hole spacing for the screwed joint: about 104mm.

Mirror round. Diameter: about 105mm. Completely made of metal. Very beautiful small mirror

Mounting holes center - center: 47mm.

Mirror SPORT. Mounting on the fender. Diameter: 100mm. Completely made of metal. Typical, sporty

mirror from and the fifties and sixties.

Mirror Talbot. Completely made of anodized metal. Typical Talbot mirror, for mounting on the

fender. Diameter: about 95mm.

Cotter Pin Assortment, 555 pcs

Inclination rivet 3mm.

Circlips (shaft retaining rings) range 3-32mm. Outside! 300 pieces!

Circlips (shaft retaining rings) range 3-32mm, inside. 300 pieces!

Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High

adhesive. We have been searching for a long time since we found a really good one.

spray paint rim silver 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 650°C 400ml, colour silver

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C 400ml, colour anthracite

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

heat-resistant spray paint till 800°C, 400ml, colour black

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black brilliant 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

spray paint black matt 500ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the

alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.

Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV. Renault R4, R5. Peugeot

404 etc. clamping range 16-18mm. Opening 19mm!

Tie rod end splitter (max. 23 mm fitment), workshop quality.

Starting pilot, 200ml. Brings tired engines to running, e.g. after long holding time.

Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal

suitable for Citroen, Peugeot, Renault.

Dust cap brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also suitable

for other vehicles with 1,25 inch piston. (30,75mm)

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 3/4 inch (19,05mm). Suitable for Citroen HY

Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY

11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Plug socket, metall, seven poles, at trailer towing coupling

• Suitable for this article
• 
  Metal plug, seven poles, for the trailer
  10,81 €

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

out turner for studs for 7mm bolts, profi quality of Facom

out turner of studs for 9mm bolts, profi quality of Facom

stone guard MOTIP, colour grey for spray gun, 1000ml

Camshaft drive chain tensioner. Suitable for diesel engines: Peugeot 404, 504, 505, J7, J9, Tagora

Citroen HY. Or. No. 0849.04

Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2

XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06

Camshaft drive chain. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1 link

(simplex). Length: 94 links. Per piece! For one car, you need 2 pieces!

Camshaft drive chain, 58 chain links (duplex, double chain). Suitable for Peugeot 404, of year of

construction 1960 to 1974. Peugeot 504, 505, 604, J7, J9, Renault R5. Engines: U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0816.07

Camshaft drive chain, 90 chain links (duplex, double chain). Suitable for Peugeot 204 (1,1L), of

year of construction 1965 to 1969. Peugeot 504 (1,8L petrol + 2.3 Diesel). Peugeot 505 (2,3D + 2,5D + TD), 604 (2,3TD + 2,5TD). J7 + J9 (2,3D + 2,5D). Brand manufacturer. Or. No. 0816.21

Camshaft drive chain guide at the camshaft drive chain tensioner. Suitable for Peugeot 504 V6, 604

V6. Renault R30, Alpine V6. Per piece! You need 2 pieces.

Camshaft drive chain guide, for V6 engine. Suitable for Peugeot 504 V6, 604 V6. Renault R30, Alpine

V6. The camshaft drive chain guide is mounted opposite of the camshaft drive chain tensioner. Per piece.

Shock absorber nut. Outside diameter: 55mm. Suitable for Peugeot 204, 304, 404, 504.

Oil for shock absorber (motorcycle fork oil) 500ml, 10W, medium viscosity. This OIL woks very good

in the front shock absorber from Peugeot 204.304.404.504 etc. Around 350ml needed per shock absorber .