for Renault 504-604

Shaft seal for bearing knockout spindle, Peugeot 404/504. 45x62x10mm, Or.Nr.334510

P 404/504, anti roll bar rubber, for 22mm anti roll bar. Suitable for Peugeot 404 + 504. Or. No

5094.02

P 404/504, stud bolt suspension spring rear. M12x1,5. 112mm lengthens. Suitable for Peugeot 404 +

504

Valve timing cover seal. Suitable for Peugeot 404 with fuel injection engine. Peugeot 504

(injection engine). Or. No. 0321.15. Made in Germany.

P 404/504, shock absorber rear (1 pair). Suitable for Peugeot 404 + 504. The shock absorbers have a

threaded pin on both sides! Length when pushed together: 420mm. Length extended: 650mm.

P 404/504, fuel sender. Suitable for Peugeot 404 + 504 (4 cylinders), for saloon, convertible +

coupé. Or. No. 1526.74. The fuel sender has holes for mounting (this is the first version of the fuel sender for the Peugeot 504 and the second version for the Peugeot 404!). For the Peugeot 404, it fits the second version, which has the spare wheel under the fuel tank (under the boot floor).

P 404/504, carburetor Solex 34BICSA3 (no reproduction). Carburetor diameter: 34mm. Suitable for

Peugeot 404 (U6S, starting from series of 7.160.001 + 7.162.001). Peugeot 504 to salon 1971 (starting from series of A93: 1.120.401). Carburetor index: 51. Original SOLEX carburetor, no reproduction. Or. No. Solex: 12572 000. Or. No. Peugeot: 1415.56

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 404/504, locking ring shock absorber in front (oil packing ring). Per piece. Suitable for Peugeot

404 + 504.

P 404/504, water pump, disengageable fan. Suitable for Peugeot 404 + Peugeot 504. For 1,6, 1.8

2,0L engines (XM/XM7). The water pump is for the second version, with disengageable fan blade. Length of the shaft: 55mm. 4x connection. Or. No. 1201.79 + 1202.70 + 1202.71 + 1202.61

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater
  1,29 €
• 
  P 404/504, water pump seal. Suitable for Peugeot 404 + 504. Or. No. 1206.08
  8,38 €

P 404/504, water pump, for disengageable fan blade. Suitable for Peugeot 404 + Peugeot 504. Engine

For 1,6, 1.8, 2,0L (XC7). Installed starting from year of construction 1960. The water pump is for the first version, with disengageable fan blade. Length of the shaft: 53mm. 3x connection (1x plugged). Or. No. 1202.60, 1202.12, 1202.36, 1202.48, 1202.59, 1202.84

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater
  1,29 €
• 
  P 404/504, water pump seal. Suitable for Peugeot 404 + 504. Or. No. 1206.08
  8,38 €

P 404/504, water pump, for rigid fan blade. Suitable for Peugeot 404 + Peugeot 504. Engine: For

1,6, 1.8, 2,0L (XC7). Installed starting from year of construction 1960. The water pump is for the first version, with rigid fan blade. Length of the shaft: 37mm. 3x connection. Or. No. 1202.13 + 1202.37

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  P 404/504, water pump seal. Suitable for Peugeot 404 + 504. Or. No. 1206.08
  8,38 €

P 404/504, water pump, rigid fan. Suitable for Peugeot 404 + Peugeot 504. For 1,6, 1.8, 2,0L

engines (XM/XM7). The water pump is for the second version, with rigid fan blade. Length of the shaft: 37mm. 4x connection. Or. No. 1201.78 + 1202.69 + 1202.83 + 1202.72 + 1202.76

• Suitable for this article
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater
  1,29 €

P 404/504, water pump seal. Suitable for Peugeot 404 + 504. Or. No. 1206.08. Made in Germany.

P 404/504, gear rack end on the right. Thread: M16x1,5. Suitable for Peugeot 404 + 504.

P 404/504, shock absorber rear (1 piece). Suitable for Peugeot 404 + 504. Partial Peugeot 505. The

shock absorber has down a bonded-rubber bushing, above threaded pin!

P 404/504/505, Allen screw for the clutch securement. Suitable for Peugeot 404, 504 + 505. Thread

M12x1,5. Length: 64mm. Or. No. 6913.61

P 404/504/505, universal joint at the gearbox outlet, for the cardan shaft. Suitable for Peugeot

404, of year of construction 11/1967 to 12/1971. Peugeot 504 (1796cm ³, 1971cm ³, 2664cm ³) sedan, BREAK, Cabriolet + Coupe. Peugeot 505 (all engines). Number of teeth: both sides 25. Or. No. 2619.17

P 404/504/505, clutch release yoke, for hydraulic clutch (gearbox BA7). Suitable for Peugeot 404

starting from year of construction 1967. Peugeot 504, Peugeot 505. Or. No. 2117.39

P 404/504/505, bearing for the gearbox main shaft. Suitable for Peugeot 404, Peugeot 504, Peugeot

505. Outside diameter: 75mm. Inside diameter: 35mm. Overall height: 20mm. Or. No. 230810

P 404/504/505, liner gasket bottom. Fits Peugeot 404 from year of construction 01/1970 (engine XC7

CM7). 504/505 from 01/1971 (engine XM7, XN1, XN1A). J7 (engine XM7P + XC7P). Engines until year of construction 06/1984

P 404/504/505, clutch disk. Dimension: 215mm x 29 x 10mm. 6 springs, 10 teeth. Suitable for Peugeot

404, starting from year of construction 1967 (all petrols). Peugeot 504 + 505 petrols, with 215mm pressure plate and 6 springs in the clutch disk.

P 404/504/505, engine suspension in front. Suitable for Peugeot of 404 Diesel, 504 Diesel, 505

Diesel. Hole spacing: 85mm. Or. No. 1807.28

P 404/504/505, engine suspension in front. Suitable for Peugeot 404, Peugeot 504 + 505. The engine

suspension fits on the left of or on the right. Engine: XN6. Hole spacing: 86 mm. Or. No. 1807.25

P 404/504/505, belt pulley on the crankshaft. Suitable for Peugeot 404, 504, 505. Or. No. 0515,46 +

0515E2. Diameter: 13,10cm. Outside diameter of the scroll seal: 45,35mm.

P 404/504/505, bonded-rubber bushing, for the fixture plate spring rear axle. Suitable for Peugeot

404, 504, 505. Inside diameter: 16mm. Outside diameter: 32mm. Length inside: 69mm. Length outside: 60mm. Or. No. 5131.39

P 404/504/505, shaft seal (with metal inset) for the wheel hub rear (full-floating axle)

Dimension: 53 x 79 x 10mm. Suitable for Peugeot 404, 504, 505. Or. No. 3345.31

Valve timing cover seal. Suitable for Peugeot 404 with carburetor engine. Peugeot 504 (carburetor)

505 (carburetor). Or. No. 0321.11. Made in Germany.

P 404/504/505, cylinder head screws (10 item). Suitable for Peugeot 404, 504, 505, J5 Citroen C25

All fuel engines (XM7 + XN1) from 1,6L to 2.0 liters engine capacity. Thread: M12. Length: 144mm. Or. No. 0204.21.

P 404/504/505/C25, valve cover gasket for Peugeot 404, all petrol engines. Peugeot 504 + 505 for

petrol engines to 1971cc. Citroen C25 petrol. Or. No. 0249.14

P 404/504/505/J5, engine gasket set. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Petrol engines

1.6 + 1,8L (XM7, XM7A, XC7, XC7P, XM, XM7P). 86 mm bore. Inclusive Cylinder head gasket. Original supplier! Delivery without liners sealing rings!

• Suitable for this article
• 
  P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine
  7,28 €

Bushing bumper rear for Peugeot 404 from 04/1963 to 12/1971. For 504 from 06/1968 to 02/1971 and

for 604 from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, heigth: 24mm.

P 404/504/604, elbow tubing seal above (fusion exhaust pipe to the exhaust elbow). Suitable for

Peugeot 404. Peugeot 504, J7. Peugeot 604, starting from serial number 655429 (for 604, you need 2 pieces). Outside diameter: 57mm. Inside diameter: 43mm. Or. No. 1710.07

P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for

Peugeot 204, 304, 404, 504, 505, 604, J7.

P 404/504/694/J7/HY, cylinder head gasket Diesel, for engines XD4.88, XDP4.88, XDP4.90, XDP88

XDP90, XDPX90. (1948cc + 2112cc). Suitable for Peugeot 404 D, 504 D, 604 D, J7 Diesel. Citroen HY Diesel. Or. No. 0203.70

P 404/504/C25/J5, cylinder head gasket. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Citroen

C25. Suitable for petrol engines 1,6L + 1,8L. Installed starting from 09/1970 ((XM7, XM7A, XC7, XC7P, XM, XM7P). 1,73mm heavily. 4 grooves.

P 404/504/HY, engine gasket set Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY Diesel +

Peugeot 404 D + 504 D. Without shaft seals

• Suitable for this article
• 
  Engine oil Castrol Classic 20W50, filled up in a beautiful sheet metal can
  58,41 €
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D

Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

P 404/504/J7, piston + liner (4 pieces), suitable for Peugeot 404, J7 + 504. For engine: XC7, XC7P

Engine capacity: 1618cc. Compression: 7,6: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 99,20mm. Height from downside to bulge (base) of the liner: 90,03mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504/J7, generator 12V, 50A, for Peugeot cars with control light! Single swivel arm

installation system on the right of 20°.

P 404/504/J7/C25, air filter. Suitable for Peugeot 504, starting from year of construction 10/1970

The air filter also partly fits in Peugeot 404, J7 + Citroen C25. Outside diameter: 119mm. Inside diameter: 91mm. Height: 170mm.

Piston + liner (1 fitting), suitable for Peugeot 404 Diesel, 504 Diesel, Peugeot J7 Diesel. Citroen

HY Diesel. For engine: XD8, XDP4/88. Engine capacity: 1948ccm. Bore: 88mm. Piston pin: 28 x 72,0mm. Piston rings: 2,0 - 2.0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 96mm. Height totally: 173,10mm. Outside diameter above: 106,30mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston + liner (4 fittings), suitable for Peugeot of 404 Diesel, 504 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD8, XDP4/88 (1 series). Engine capacity: 1948cc. Bore: 88mm. Piston pin: 28 x 74,40mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 94mm. Height totally: 173,20mm. Outside diameter above: 104,90mm. Height from downside to bulge (base) of the liner: 129mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 BREAK, central silencer. Suitable for Peugeot 504 BREAK, of year of construction 04/1971 to

1983. Or. No. 1750.30

P 504 BREAK, Y-pipe - elbow pipe. Suitable for Peugeot 504 BREAK (1,8L petrol), of year of

construction 01/1968 to 12/1972. Engine: XM7. Or. No. 1701.86

P 504 Cabrio + Coupe/hand brake cable from handle to guide roller. (First cable) 504 starting from

m 12/1970. Lengthens 1850mm, socket 1440mm. Or.Nr.474537.

P 504 Cabrio + Coupe / hand brake cable from handle to guide roller. (First caple) 504 from 12/1968

8 to 12/1970. Lengthens 1850mm, socket 1450mm. Or.Nr.474523

P 504 Cabrio 2.0/hand brake cable on the left of or on the right fitting. Installed from 10/1972 to

o 9/1976. Lengthens 1655mm, socket 1130mm.

P 504 Cabrio 2,0. Hand brake cable (on the left of or on the right suitable), for Peugeot 504

Cabrio 2,0L. Installed from year 1969 to 09/1972 (Salon 1972). Length: 1020mm. Casing length: 770mm. Or. No. 4834.38

P 504 Cabrio, reflector set (4 pieces) without headlight glass (only the chrome-plated reflector)

Suitable for Peugeot 504 Cabriolet + Coupe, from 1975 (phase 2 + 3). Or. No. 6225.18

P 504 Cabrio, connecting metal at the rear left (behind the end point of the rear fender). Or. No

8521.31 / Original Peugeot, no reproduction!