for Renault 504-604

Oil pump for Peugeot Diesel. Engine code: XD2, XD3. Suitable for Peugeot 504, 505, J7, industrial

engines. Or. No. 1001.37

Oil pump with suction strainer. Suitable for Peugeot of 504, 505. 4 liners fuel engines. Or. No

1001.30

Oil pump, befitting for Peugeot 504 (petrol + Diesel). Peugeot 505 (petrol + Diesel). Citroen C25

(petrol + Diesel). Or. No. 1001.30

Oil pan seal euro engine (PRV). Suitable for Peugeot 504 V6, Peugeot 604 V6. Renault Alpine A310 V6

(not for engines with aluminum oil pan), R30 V6.

Oil pan seal Peugeot Diesel. For the following engines: XD2, XD4.88, XD4.90, XD2S, XD3, XD3TE

XDP88, XDP90, CD2P94. Suitable for Peugeot 404, 504, 505, 604, J7, J9. Citroen HY Diesel. Or. No. 0313.23

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil change card "Der Franzose". With inspection list. Language: German, English, French! Per piece!

Oil change cards (10 fittings) "Der Franzose". With inspection list. Language: German, English

French!

Aluminum sealing ring range. 300 sealing rings, from 9x1 to 28x26. Optimally for brake and engine.

• Suitable for this article
• 
  Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën
  8,83 €

Copper sealing ring range. 150 fittings.

P 104/504/505, door handle in front on the right, outside. Suitable for Peugeot 104, 504, 604. Or

No. 9101.44

P 203/403/404/504, brake shoe mounting kit for servo brake (Mastervac) at rear. Suitable for

Peugeot 203, 403, 404, 504. For saloon, coupé and convertible. Consisting of: 2x 4375.16, 2x 4308.06, 4x 4312.06, 4x 4315.08, 2x 5363.01. Total length of springs: 132.5mm + 65mm.

P 203/403/404/504, grease cap out of sheet metal. Diameter: 66mmm. Suitable for Peugeot 203, 403

404, 504 (to year of construction 1976). Or. No. 3740.07

P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404

404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17

P 203/403/404/504, wheel bearing shaft seal in front. Suitable for Peugeot 203, 403, 404, 504

Dimension: 42 x 62 x 10mm. Or. No. 3724.08

P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm

Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09

P 204/304/404/504, flexible disk steering column. Suitable for Peugeot 204, 304, 404, 504. Pitch

h diameter: about 50mm. Or. No. 4040.14

P 204/304/404/504, rear axle rubber stop. Diameter: 55mm. Height: 53mm. Suitable for Peugeot 204

304, 404, 504. Or. No. 3514.12

P 204/304/404/504, gear knob for steering wheel gear change. Please note: this is the rubberised

version (not Bakalit). Suitable for all Peugeot 204, 304, 404, 504 with steering wheel gear change! Or. No. 2401.16

P 204/304/504/ repair set of wheel brake cylinders rear, system Girling, 7/8 piston 22,225mm.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 204/304/504/104 repair set for the master brake cylinder (2 circle brake). Piston diameter

19,05mm. The sealing set fits for the two different 2 circle master brake cylinder Peugeot 304. With early master brake cylinder (4601.37) must be ordered the sealing set 2x (there has each piston 2 collars). With the later version starting from FIN 3.733.770 and the Or. No. 4601.72, you need only 1 sealing set. The early version has 2 dowel pin, the late version a retaining ring.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 204/304/504/505, bearing for the steeering rack (24mm diameter). Suitable for Peugeot 204 + 304

with gear rack length: 468mm. Peugeot 504 + 505 for steering unit without power steering. Or. No. 4006.14

P 204/304/504/505, wheel bearing shaft seal. Dimension: 54 x 72 x 10mm (wheel bearing inside)

Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3345.17

brake hose Peugeot 204+304,104,504,505. front 09/75>10/77, length 375mm, male thread 1xM10x1

1 - female thread 1x M10x1

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

P 204/304/504/505/604, shaft seal wheel bearing (exterior). Outside diameter: 70mm. Inside

diameter: 55mm. Height: 10mm. Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3346.06

P 204/403/404/504, wheel bearing rear (exterior bearing). Outside diameter: 52mm. Inside diameter

20mm. Wide one: 15mm. Suitable for Peugeot 204, 403, 404 + 504. Or. No. 3735.03 Made in Spain

P 204/504, axle for a-arm. Length: 78mm. Diameter: 14,0mm. Thread: M12 x 1,5. Suitable for Peugeot

204, 504, 505, 604. Or. No. 5249.20

P 304/305/504/505, repair set for the steering gear (28mm gear rack). Suitable for Peugeot 304

starting from year of construction 1977. Peugeot 504, 505, 604.

brake hose Peugeot 504 front 09/75-10/82, P 304, P305,P404,P604, length 401mm, connections male

thread M10 + female thread 1x M10. Made in Europe.

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

clip for brake hoses, Peugeot 304, 404, 504

P 304/504/505/604, thrust piece (diameter 28mm) gear rack. Suitable for Peugeot 204, 304 (new

mounting). Peugeot 504, 505, 604. Or. No. 4062.10

P 304/504/505/604, bonded-rubber bushing for the anti roll bar. Diameter: 30mm. Length: 30mm

Inside diameter: 12mm. Or. No. 508709

P 403/404, wheel brake cylinder with 1 piston 30mm,brake line connector 3/8 x 24UNF (9,5mm),403 Bj

1961->, 404, 404 Comercial, 404 Pick UP. Mounting board bore 21,5mm, , length over all 63,5mm. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Guide sleeve for the horn actuation rod in the steering column. Suitable for Peugeot 403, 404

partly 504. Material Celaron. 2,7x6x15mm. Or. No. 626305

brake master cylinder, single-circuit brake system, Peugeot 404 07/60-10/66, piston 25,4mm, 504

P 403/404/504, fan blades for Peugeot 403 + Peugeot 404, Peugeot 504 TI 2.0L (with very minor

modifications). Reproduction made of plastic! Outer diameter: 325mm. Diameter for the mount on the water pump: approx. 104mm. Height: 43mm.

wheel brake cylinder repair set 403+404+504 with 30mm piston, fornt

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 403/404/504, wheel bearing set rear. Suitable for Peugeot 403, of year of construction 1958 to

1966. Peugeot 404 (sedan, Cabriolet + Coupe) of year of construction 1960 to 1975. Peugeot 504 (sedan, Cabrio + Coupe) starting from year of construction 1973. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 17,0mm.

P 403/404/504, bonded-rubber bushing mounting plate spring at the rear axle, Peugeot 403, Peugeot

404 + 404 Pick UP, Peugeot 504 Pick UP. Measurements inside 16mm, outside 32mm. Length inside 54mm, outside 50mm

P 403/404/504, shock absorber rear (2 fittings). Suitable for Peugeot 403 Pick Up, 404 Pick UP +

504 Pick UP. Length over everything: 415mm (compressed) + 650mm (pulled apart). Inside diameter bonded-rubber bushing: 13,4mm. Diameter shock absorber: 50mm.

Ignition lock for Peugeot 403/404/504, without steering lock. Replica.

P 403/404/504/505, gearbox bearing BA7/4 + Ba/5 gearbox. Fits primary shaft on engine side

Secondary shaft2, opposite engine (rear). Intermediate shaft 1, engine side. For Peugeot 404, Peugeot 504, Peugeot 403, Peugeot 505. Outer diameter:: 75mm. Inner diameter:: 35mm, Overall height: 20mm. The bearing has a groove on the outer ring. Or. No. 2308.10

P 403/404/504/505, bearing for the jackshaft, rear (gearbox BA7). Suitable for Peugeot 403, Peugeot

404, Peugeot 504, Peugeot 505. Outside diameter: 47mm. Inside diameter: 21,5mm. Overall height: 16.25 mm. Or. No. 2372.11

P 403/404/504/J7, brake hose rear, suitable for Peugeot 403, 404, 504, J7. Overall length 480mm

Connections both sides: Male thread 5/8 x 24UNF, female thread 3/8 x 24 UNF. Or.Nr. 445116 + 481607. Made in Europe.

Wheel bearing oil-seal-ring 45x62x12. Peugeot 403, 404, 504, J7. Made in Germany.

Carburetor repair set Peugeot 403, 404, 504, Simca Rally 1000. Carburetor Solex 34 BICSA 3/12.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 404, clutch release yoke, for hydraulic clutch. Suitable for Peugeot 404 Diesel, starting from

year of construction 1967. Peugeot 305, 309, 405. Citroen C15, Citroen BX 19, starting from 1987. Or. No. 2117.42

• Suitable for this article
• 
  Bush for the clutch fork. Suitable for some Peugeot 205. Citroen C15, BX. Or
  2,13 €

P 404, carburetor 34 BICSA (reproduction). Suitable for Peugeot 404 (engine XC6). Not suitable for

automatic gearbox. Peugeot 403. Peugeot 504 (engine XM7).

• Suitable for this article
• 
  Seal under carburetor, distance plate between intake manifold and carburetor
  5,62 €
• 
  Seal under carburetor for Citroen 2CV, with round carburetor. Inside diameter
  2,18 €
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions

78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany

P 404/504, front exhaust collector, mounted on the exhaust manifold (resonator). Suitable for

Peugeot, from 1967 year of construction. Peugeot 504, with 1.8L engine. Or. No. 1720.03

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot
  4,86 €

P 404/504, clutch release sleeve for Peugeot 404 gasoline + diesel, from year of manufacture 1967

Peugeot 504 (1.8 + 2.0 gasoline) + diesel. For clutch disc with 8 springs.