2CV, Chassis guide under the luggage compartment sheet metal, suitable for Citroen 2CV. This welded
sheet metal takes up the chassis end points. Made in Europe.
chassis for Alle Alle
232 Articles | Page 1 of 5
Body new! Suitable for Citroen 2CV6 RHD (right hand drive). Only collection, no dispatch possible
The body was built completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
PDF FILE Body new! Suitable for Citroen 2CV6. Only collection, no dispatch possible. The body was built
completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
Cover plug (40mm) for the original chassis (in the upper sheet metal). Suitable for Citroen 2CV
Dyane. For 40mm inner diameter hole in the cover plate.
Swing arm (Radius arm)mounting at the rear left (completely). Suitable for Citroen DS. Perfect
reproduction, like original!
Swing arm (Radius arm) mounting at the rear right (completely). Suitable for Citroen DS. Perfect
reproduction, like original!
AK250, new body! Suitable for Citroen AK250 (low box body). Only available for collection, no
shipping! The body has been built completely from new parts. The quality of the body is good, but some minor reworking is necessary. For example, some weld spots need to be reground and the transition to the windscreen frame should be tinned. The raw sheets (before processing and forming) are galvanised. New: Each body comes with a series of photos (via QR code) showing the correct fit, as the body is always test-fitted with original sheet metal parts. Made in Europe. Attention: The body is delivered without front doors and without rear doors!
AK400, body New! Suitable for Citroen AK400. Only pickup, no shipping! The body has been completely
rebuilt from new parts. The quality of the body is good, but small refinishing work is needed. Some welding spots need to be reground and the transition to the windshield frame should be tinned. The raw sheets (before processing and forming) are galvanised. New: Each body is now supplied with a series of photos (via QR code) showing the correct fit, as the body is always test-fitted with original sheet metal parts. Made in Europe. Please note: the body is supplied without front doors and without rear doors!
Sheet metal nut (4,8mm), for the securement of the car front. Suitable for Citroen DS. Dimension
20 x 12 x 2,6mm. Or. No. ZC9615745U
B-post end left, with fixture for the rubber down at the support. The rubber is down tapered
Suitable for Citroen DS sedan.
B-post end right, with fixture for the rubber down at the support. The rubber is down tapered
Suitable for Citroen DS sedan.
Clamp at the chassis. Original Renault. This clip was nearly at all Renault R4, R16, R12, Dauphine
etc. installed. Or. No. 7701493039
Sheet metal under the engine (engine guard plate), for the original chassis of Citroen 2CV. This
sheet metal is locked under the chassis. Heavy: 1,5mm. Made in Europe.
Sheet metal under the engine, for our galvanized chassis "Made in Germany". This sheet metal is
only attached, and can trap oil. It serves also as easily protection plate for the oil pan.
Floor pan on the left. Reinforcing plate (reinforcement on the floor pan). Bottom surface floor pan
to box sill sheet metal. Suitable for Citroen DS Berline.
Floor pan left. Reinforcing plate (double reinforced) underside base plate to sill plate. Suitable
for Citroen DS Break and Cabriolet. Or. No. DVB744-319A
Floor pan edge in rear on the left (with connection sheet metal to the box sill). Suitable for
Citroen DS. That is a simple repair sheet metal (without flanges). In former times, this sheet metal was used for a simple repair. Today we would not use this sheet metal any longer. Made in Europe.
Floor pan edge in rear on the right (with connection sheet metal to the box sill). Suitable for
Citroen DS. That is a simple repair sheet metal (without flanges). In former times, this sheet metal was used for a simple repair. Today we would not use this sheet metal any longer. Made in Europe.
Floor pan edge in front on the left (with connection sheet metal to the box sill). Suitable for
Citroen DS. That is a simple repair sheet metal (without flanges). In former times, this sheet metal was used for a simple repair. Today we would not use this sheet metal any longer. Made in Europe.
Floor pan edge in front on the right (with connection sheet metal to the box sill). Suitable for
Citroen DS. That is a simple repair sheet metal (without flanges). In former times, this sheet metal was used for a simple repair. Today we would not use this sheet metal any longer. Made in Europe.
Floor pan on the right. Reinforcing plate (reinforcement on the floor pan). Bottom surface floor
pan to box sill sheet metal. Suitable for Citroen DS Berline.
Floor pan on the right. Reinforcing plate (double reinforced) underside base plate to sill plate
Suitable for Citroen DS Break and Cabriolet. Or. No. DVB744-319A
Floor pan between tank floor plate and baggage compartment floor. Fits for Citroen DS Sedan, up to
year of manufacture 1962.
Floor pan between tank floor plate and baggage compartment floor sheet metal. Reinforced version
from 1,5mm sheet metal. The sheet metal has 2 reinforcements for the jacking points. Suitable for Citroen DS Sedan, from year of manufacture 1962 to 1974.
Floor pan edge on the left (with flanges). This repair sheet metal is about 20cm wide and over the
whole length of the floor plate in the interior. It is the connection to the left box sill at the floor pan. Suitable for Citroen DS.
Floor pan edge on the right (with flanges). This repair sheet metal is about 20cm wide and over the
whole length of the floor plate in the interior. It is the connection to the right box sill at the floor pan. Suitable for Citroen DS.
C-support interior sheet metal on the left. Suitable for Citroen DS sedan. The sheet metal connects
at the wheel housing on the left. Or. No. D812-79
C-support interior sheet metal on the right. Suitable for Citroen DS sedan. The sheet metal
connects at the wheel housing on the right. Or. Nr. D812-79A
C-pillar on the top left, cover plate for the rear edge, below the indicator (rear window frame on
the left). The plate is the extension of our C-pillar plate on the left 37812!
C-support on the left above, external sheet metal (not the outer ornamental paneling). Suitable for
DS sedan. Or. No. D821-55
C-support on the left, completely to fender upper edge. Suitable for Citroen DS sedan, up to year
of construction 03/1968 (star lock at the door, securement with 2 screws). Or. No. D812-2
C-support on the left, completely to fender upper edge. Suitable for Citroen DS sedan, of year of
construction 04/1968 to 1974 (striker plate securement with 3 screws).
C-support on the left, completely up to the roof. Suitable for Citroen DS sedan, up to year of
construction 03/1968 (star lock at the door, striker plate securement with 2 screws).
C-support on the left, completely up to the roof. Suitable for Citroen DS sedan, from year of
construction 04/1968 to 1974 (striker plate securement with 3 screws).
C-post on the left. End with fixture for the rubber down at the support. Suitable for Citroen DS
sedan. Made in Germany.
C-pillar on the top right, cover plate for the rear edge, below the indicator (rear window frame on
the right). The plate is the extension of our C-pillar plate on the right 37813!
232 Articles | Page 1 of 5
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
