Sealing rubber (collar) for the rear axle tube at the gearbox. Suitable for Renault Caravelle
Floride, R8, R10. Inside diameter: 50 + 95mm. Length over everything: 125mm.
drive shaft for Alle Alle
100 Articles | Page 1 of 2
Sealing rubber, for the seal of the wheel bearing, to the drive shaft. Suitable for Citroen DS. Per
piece. Dimension: 104.8 x 109.9 x 8. Or. No. DX37394
Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV, Dyane, AK, AZU, Mehari, on which
the drive shaft flange is fixed with 4 screws (always vehicles with drum brake). All 2CV, Dyane... with 6 bolts (drum brake + disc brake) need the oil seal 12089. Dimension: 32 x 50 x 10mm. Made in Germany.
Drive shaft 2CV, oil seal on gearbox. Suitable for Citroen 2CV6 + 2CV4, Dayne, AK, Mehari, on which
the drive shaft flange is fixed with 6 bolts (i.e. all vehicles with disc brakes and the latest model years with drum brakes). Vehicles with 4 bolts need the oil seal 12294. Size: 31 x 42 x 8mm. Made in Germany.
Drive shaft 2CV6 wheel side. Suitable for Citroen 2CV6 to year of construction 1990. New part
Manufacturer SKF. No old part return necessarily. The best choice! Overall length: 440mm
Drive shaft wheel side! Suitable for Citroen 2CV6 to year of construction 1990. New part
Reproduction. Overall length: 445mm.
Drive shaft gearbox side. Suitable for Citroen 2CV6 to year of construction 1990. New part! Old
part return not necessarily! Note: Please grease the joint before mounting (for it the sheet metal lid dismantle)!
Drive shaft repair set, suitable for Citroen DS + HY. Without drive shaft collars! The needle
bearing cups have a diameter of 34mm. Height of 14mm.
Drive shaft securement at the gearbox, Bibax rubber. Per side. Suitable for Citroen DS19, to year
of construction 1965. Or. No. D3762
Drive shaft crown nut, suitable for Citroen 2CV + Citroen GS. Reproduction. Tightening torque
e: 343-392Nm. Or. No.: A-416-8/5420543
Drive shaft nut left (right-hand thread). Suitable for Citroen HY. Or. No. H4168D. Torque: 20mkg
200NM. Made in Germany. We have modified the nut so that instead of a 38mm long nut now a common 36mm normal nut can be used.
Drive shaft nut right (left-hand thread). Suitable for Citroen HY. Or. No. H4168E. Torque: 20mkg
200NM / Made in Germany. We have modified the nut so that instead of a 38mm long nut now a common 36mm normal nut can be used.
Sheet metal plate at the drive shaft, gearbox side. Suitable for Citroen 2CV from fifties to
beginning seventies. Opening diameter: 47,5 + 80,0mm. Or. No.: AM373.89
Sheet metal plate at the drive shaft. Suitable for Citroen 2CV from the sixties + seventies
s, Citroen Dyane, AK, AMI. Opening diameter: 30,0 + 80,0mm. Or. Nr.A37391
Sheet metal plate at the drive shaft. Suitable for Citroen 2CV from the sixties + seventies
s, Citroen Dyane, AK, AMI. Opening diameter: 34,0 + 80,0mm. Or. Nr.AM37392
Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS, to year of
construction 1965. Or. No. D331-79
Seal directly at the gear-box, seal to the drive shaft. Suitable for Citroen DS. Or. No. DV33179 +
1D5411381J. Made in Germany.
Seal for drive shaft gearbox side with double universal joint. Suitable for Citroen 2CV4 + 2CV6
(starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM373-77. Inside diameter 82mm. Outside diameter 118mm.
Seal for drive shaft gearbox side with double universal joint. Suitable for Citroen 2CV4 + 2CV6
(starting from year of construction 1961 about 1973). The seal is of paper. Or. No. AM451-72A. Inside diameter 82,5mm.
Seal for drive shaft flange case at the gearbox. Suitable for Citroen 2CV4 + 2CV6 starting from
year of construction 1961). The seal is out of paper. Or. No. AT the 33186A
Differential shaft gearbox outlet. Suitable for Citroen 2CV, of year of construction 6/1965 to
1990. Length: 15,2cm. 20 splines. Original Citroen. New old stock (NOS).
Dyane: Weatherstrip for the drive shaft on the left, in the front left interior fender. Suitable
for Citroen Dyane + ACDY. Or. No. AY851-83
Dyane: Weatherstrip for the drive shaft on the right, in the front right interior fender. Suitable
for Citroen Dyane + ACDY. Or. No. AY851-83A
Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease was
particularly developed for high-speed bearings (wheel bearings). Extremely acid-resistant! (Seawaters)
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Rubber sleeve for the vibration damping of the drive shafts. Blue marking! Suitable for Citroen DS
Dimension: 26 x 59.5 x 61mm. Or. No. DX373101A. Per piece!
Universal joint drive shaft: Sealing ring (nylon), down in the universal joint. Suitable for
Citroen DS. Dimension: 23 x 32 x 3,6mm. Or. No. DS372-98
Universal joint for the drive shaft wheel side. Suitable for Citroen 11CV + 15CV. The universal
joint has centrically a hole. Dimension: 75x27mm. Or. No. 441720
Universal joint suitable for the drive shaft, for Citroen 2CV from the sixties + fifties
Reproduction. 25mm diameter, 57mm long. Significant reproduction. Or.Nr.: A37203
Universal joint suitable for the drive shaft, for Citroen 2CV from the sixties + fifties
Reproduction. 25mm diameter, 61mm long. Or.Nr.: A37203
Universal joint retaining ring (check ring) for the drive shaft. Suitable for Citroen 2CV from the
fifties to seventies. AM372-6C
Crown nut for the brake drum on the left (right-hand threads). Suitable for Citroen 11CV. Thread
M26 x 150. Or. No. 426591
Bearing drive shaft in the gearbox, suitable for Citroen 2CV. Manufacturer SKF. The bearing does
not have a groove. Measurement: 52 x 25 x 18.
Bearing flange (ring) for the drive shaft in the wheel hub. Suitable for Citroen 2CV starting from
year of construction 1966, with constant velocity drive shafts. Or.Nr.A37396.
Bearing on the left, for the connection of the drive shaft in the gearbox. Suitable for Citroen
2CV4 starting from year of construction 1963 (not for 2CV6). Original Citroen, Or.Nr.: AZ3319H
M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover screw connection on
the 11CV with D-engine. Or. No. 2372-S
100 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
