4CV/Dauphine/Floride, needle bearing 21mm (by set, per side), mounts in the rear axle. Suitable for
Renault 4CV, Dauphine + Floride.
rear axle for Alle Alle
121 Articles | Page 1 of 3
4CV/Fregate, bonded-rubber bushing for the lever arm shock absorber, in the connecting rod
(coupling rod). Suitable for Renault 4CV + Renault Fregate. Dimensions: 9 x 21 x 21 x 17mm. Or. No. 8 511 922
Cap for the radius arm bearing rear. (flatten version, for vehicles with brake hoses rear)
Suitable for Citroen 2CV, Dyane, AK, AMI, to year of construction 06/1970.
Cap for the radius arm bearing rear (for vehicles with a brake line spiral in the rear axle)
Suitable for Citroen 2CV, Dyane, AK, AMI, starting from year of construction 06/1970.
Sealing rubber (collar) for the rear axle tube at the gearbox. Suitable for Renault Caravelle
Floride, R8, R10. Inside diameter: 50 + 95mm. Length over everything: 125mm.
Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
bended at the end. So it`s easy to mount. Made in Germany.
Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm
Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.
Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor
quality. Tightening torque: 343-392Nm.
Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening
torque: 343-392Nm. Original Citroen! The better choice.
Hub nut. Thread: M18 x 1,5. Suitable for Peugeot 104, 204, 304, 403, 504 (starting from year of
construction 1982). Or. No. 6935.40
Brake tube protection (scoring protector)rear axle, for Citroen 2CV4+6. For vehicles with rear
brake tubes on rear axle. This protector has to be put around the brake tube on rear axle in front of 3 path link.
Brake drum rear (new part), with mounted wheel bearing. The brake drum is ready for assembly
mounted. Consisting of: New brake drum, new wheel bearing, new shaft seal, new wheel bearing screw. Suitable for Citroen 2CV.
Rear brake drum, new part. 180mm diameter, for the large wheel bearing. Suitable for Citroen AZU
AK, ACDY, AMI. The brake drum is supplied without wheel bearing.
Drum rear, new part. 180mm diameter. Suitable for Citroen 2CV, Dyane, ACDY, Mehari. The drum is
supplied without wheel bearings. Or. No. 96995256
Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing
grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).
Grease cap for 160mm brake drum. Suitable for Renault R4, Caravelle, Floride, Dauphine and many
other Renault. Front axle and rear axle. Overall height: 27mm. Outside diameter: 42mm. Or. No. 0607035200
Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel
bearing, rear in the drum.
Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!
Rubber stop round (conically), for the rear axle. Suitable for Citroen DS + SM. Citroen HY
Dimension: about 46,5x34mm. Or. No. 1D5404572Y
Rubber stop buffer for the radius arm rear. Suitable for Citroen 2CV, to year of construction 1973
Completely with fixture. The rubber buffer is attached with a nut. Length of thread: 12mm. Thread diameter 14mm.
Rubber stop buffer for the radius arm rear. Suitable for Citroen 2CV, to year of construction 1973
Completely with fixture. The rubber buffer is attached with a nut. Length of thread: 25mm. Thread diameter 14mm.
Rubber stop buffer for the radius arm, rear in the wheel housing. Conically. Suitable for Citroen
2CV, to year of construction 01/1973. (The rubber stop has a lowering bore for the securement)
Rubber stop buffer for the radius arm, rear in wheel housing. Suitable for Citroen 2CV, of year of
construction 1973 to 1990.
Rubber bush (2 fittings) anti roll bar rear, down. Suitable for Citroen 11CV + 15CV. Bore 16,5mm
Cone from 30,5 to 26.5mm. Overall height of 17mm. Or. No. 421014
Rubber ring, for the seal of the rear radius arm bearing. Suitable for Citroen DS. Dimension: 54 x
62 x 4mm. Made in Germany.
Rear axle Hypoid OIL, 80W90 GL5. 1 liter box. For the rear axle Peugeot 404, 504, 505. Caution
on, Peugeot 404 with smooth rear axle housings has a worm drive. This requires lubricator oil on vegetable basis. Our number 71001. All rear axles with serrated cases get Hypoid transmission oil!
Rear axle oil (1 liter), suitable for Peugeot 203, 403, 404. Lubricator oil (on Rizinus basis), for
the worm drive of the rear axle.
M35, rubber stop for the suspension. Suitable for Citroen M35 (Wankel). The front axle has 4
rubbers. You can use this rubber also for the rear axle (with little easy changes). Or. No. AL437-1 + AL437-3
P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404
404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17
P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm
Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09
P 204, rubber stop rear axle, Peugeot 204. Or.Nr. 516610. The sheet metal plate has a diameter of
55mm, M8 thread, height about 47mm.
P 204/304/404/504, rear axle rubber stop. Diameter: 55mm. Height: 53mm. Suitable for Peugeot 204
304, 404, 504. Or. No. 3514.12
121 Articles | Page 1 of 3
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
