welded body components for Alle Alle
352 Articles | Page 1 of 8
2CV old, box sills on the left completely, for Citroen 2CV to year of construction 1970. The box
sills have the stud bolt for the fender securement and no seat belt attachment. Made in Europe.
2CV old, box sills on the right completely, for Citroen 2CV to year of construction 1970. The box
sills have the stud bolt for the fender securement and no seat belt attachment. Made in Europe.
2CV RHD, pedal floor pan double. Strengthened version. For all Citroen 2CV RHD (right hand
steering) with hanging brake + clutch pedal (installed from about 1977 to 1987). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
A + C support repair sheet metal for Citroen 2CV. Suitable for all years of construction. The sheet
metal is about 50cm long and has the original form of A + C support (seen in the cross section). Made in Europe.
2CV, A-post, repair sheet metal rainwater gutter strip (simple reproduction). This strip very often
releases itself at Triangle sheet metal from Citroen 2CV. With this sheet metal a simple repair is possible. About 410mm long, on the left + on the right fitting.
2CV, A-post, repair sheet metal rainwater gutter strip (very good reproduction). This strip very
often releases itself at Triangle sheet metal from Citroen 2CV. With this sheet metal a simple repair is possible. About 500mm long, on the left + on the right fitting.
2CV, Triangle sheet metal, bottom left, 10cm. This sheet metal is supplied with additional
connection sheet metals. Made in Europe.
Triangle sheet metal on the left, repair sheet metal for the lower 10cm, which overlaps on the box
sill. Suitable for Citroen 2CV, all years of construction! Made in Germany by Franzose.
2CV, Triangle sheet metal, bottom right, 10cm. This sheet metal is supplied with additional
connection sheet metals. Made in Europe.
Triangle sheet metal on the right, repair sheet metal for the lower 10cm, which overlaps on the box
sill. Suitable for Citroen 2CV, all years of construction! Made in Germany by Franzose.
Triangle sheet metal side panel on the left, reproduction. Suitable for Citroen 2CV, all years of
construction. Made in Europe.
Triangle sheet metal side panel on the right, reproduction. Suitable for Citroen 2CV, all years of
construction. Made in Europe.
2CV, dashboard (RHD) down (sheet metal), inclusive fixture for gear shift lever + parking brake
Suitable for right hand drive Citroen 2CV, AK (RHD). Made in Europe.
Dashboard tie bar down, completely with all fixtures (headlight vertical adjustment, choke cable
parking brake). Suitable for Citroen 2CV, AK. Made in Europe.
2CV, dashboard down (sheet metal), inclusive fixture for gear shift lever + parking brake. Suitable
for Citroen 2CV, AK. Made in Europe.
2CV, speedometer and starter lock mounting in the body (dashboard). Complete sheet metal
construction. Suitable for Citroen 2CV, AK, AZU. Made in Europe.
2CV, B-Support base + reinforcing plate on the left, for Citroen 2CV. This sheet metal rests upon
the box sill and takes up the B-support. Very often it is rusted, or one destroys it, if the box sill must be exchanged. Made in Europe.
2CV, B-Support base + reinforcing plate on the right, for Citroen 2CV. This sheet metal rests upon
the box sill and takes up the B-support. Very often it rusted, or one destroys it, if the box sill must be exchanged. Made in Europe.
2CV, B-Support seat belt attachment, for Citroen 2CV. The seat belt attachment fits on the left and
on the right at the B-support. Made in Europe.
2CV, B-Support gusset sheet plate. Connection B-support to roof pillar. Suitable for Citroen 2CV
The gusset sheet plate (reinforcing plate) fits on the left + on the right. Made in Europe.
B-pillar, left, old model, without seatbelt attachment, with projection for old door lock, 2cv
Unfortunately, only old stocks are still available. Therefore, it can happen that there is partly flash rust under the primer! But there is nothing else.
B-support on the left Citroen 2CV. Final version. Very good reproduction from the European Union
n. Electrolytically galvanized.
B-support on the right Citroen 2CV. Final version. Very good reproduction from the European Union
n. Electrolytically galvanized.
2CV, B-Support door brake fixture, for Citroen 2CV. In addition this sheet metal fixed from rear at
the B-support and the box sill, it rests upon the floor pan. Often rusted. The sheet metal fits on the left + on the right. Electrolytically galvanized. Made in European Union.
2CV, B-Support door lock fixture on the left, for Citroen 2CV. This sheet metal takes up the
locking mechanism on the left. Made one in European Union.
2CV, B-Support door lock fixture on the right, for Citroen 2CV. This sheet metal takes up the
locking mechanism on the left. Made in European Union.
2CV, Roof pillar external sheet metal in front on the left. Suitable for Citroen 2CV. This sheet
metal is the roof outer skin between windshield frame and B-support. Made in European Union.
2CV, Roof pillar external sheet metal in front on the right. Suitable for Citroen 2CV. This sheet
metal is the roof outer skin between windshield frame and B-support. Made in the European Union.
2CV, Lug at the rear left in the luggage compartment, for Citroen 2CV. This bracket is welded and
takes up the trunk lid installing rod and the roll roof securement. Made in Europe.
2CV, Lug rear on the right in the luggage compartment, for Citroen 2CV. This bracket is welded and
takes up the roll roof securement. Made in Europe.
2CV, bracket (welded) for the gear lever. Suitable for Citroën 2CV, AK, AZU. This bracket is
welded from above the storage compartment (dashboard).
2CV, bracket for the choke cable (square mount) in the interior (made of sheet metal, welded in to
the right of the speedometer). Suitable for Citroen 2CV, AK,
2CV, bracket for the headlight height adjustment rod in the interior (made of sheet metal, welded
to the left of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, bracket for warm air adjustment lever top - bottom in the interior (made of sheet metal
welded to the right of the speedometer). Suitable for Citroen 2CV, AK, AZU
2CV, Mounting on the left for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
2CV, Mounting on the right for crossbeam under windshield, Citroen 2CV (underneath the windshield
frames). Made in Europe.
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6 RHD (right hand drive). Made in Europe.
Heater hose connection connecting piece (large, with flap), centrically (welded at the front wall)
Suitable for Citroen 2CV6. Made in Europe.
Heater hose connection connecting piece (small) on the right (welds at the front wall). Suitable
for Citroen 2CV6. Made in Europe.
Body new! Suitable for Citroen 2CV6 RHD (right hand drive). Only collection, no dispatch possible
The body was built completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
PDF FILE Body new! Suitable for Citroen 2CV6. Only collection, no dispatch possible. The body was built
completely from new parts. The quality of the body is good, however small remachining is necessary. So some spotwelds must be regrind and the transition to the windshield frame should be tinned. The raw sheet metals (before the processing and shaping) are galvanized. New: Attached to the car body, there are some pictures attesting the correct fit since the body has been mounted on a trial basis with original sheet metal components. Made in Europe.
2CV, bonnet hinge strip with repair sheet metal up to the Ventilation shutter. Suitable for Citroen
2CV. Good reproduction, like original. The sheet metal has the projection up to the ventilation shutter. Made in Europe.
2CV, engine bonnet hinge ledge, with repair sheet metal up to the Ventilation shutter. For Citroen
2CV. Simple reproduction. Made in Germany.
2CV old, pedal floor plate doubles (with brass bushes). Strengthened version. For all Citroen 2CV
with standing brake + clutch pedal (installed until about 1970). The pedal floor plate is electrolytically coated (very good rust protection). The pedal floor plate has like original 2 brass bushes in front, for the clutch and the brake. Made in Europe.
2CV, pedal floor plate double. Original, no replica. For all Citroen 2CV with hanging brake +
clutch pedals (used approx. 1977 to 1990). Made in France
2CV, pedal floor pan double. Strengthened version. For all Citroen 2CV with hanging brake + clutch
pedal (installed from about 1977 to 1990). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
352 Articles | Page 1 of 8
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
