Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

for Alle 2CV6

2752 Articles | Page 28 of 56
Shipping country Shipping country

Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all

flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.

PDF file available PDF FILE

Club 2CV6 interior (completely covered on new frames, ready to install!). Consisting of: 1x new

left-hand seat, completely reupholstered (without seat backrest adjustment), 1x new right-hand seat, completely upholstered, 1x new rear seat bench, completely upholstered. Colour: fabric (Ecossais) in blue - grey, with coloured stripes. Reproduction from Tunisia. Unfortunately, the details are not visually perfect. Really good seat covers have our number 18362.

360° VIEW

Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!

PDF file available PDF FILE

Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!

PDF file available PDF FILE

Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!

PDF file available PDF FILE

Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end

of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.

Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.

Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to

approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.

Inspection kit for Citroen 2CV6. Consisting of: 1x oil filter + seal, 1x V-belt, 2x valve cover

gasket, 1x air cleaner element, 1x set of ignition cables silicone, 1x condenser, 1x ignition contact, 2x spark plug.

Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable

harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citroën 2CV, DS, ID, HY, 11CV, all classic Renault and Peugeot models.

Under cover from sturdy cotton for Citroen 2CV seat bench rear. Made in Germany

Under cover made of sturdy cotton fabric, for 2 seats in the front! The jute cover has been

replaced by a sturdy cotton fabric. You sit a little tighter and the bottom cover does not tear so quickly. The set is suitable for 2 front seats!!! Made in Germany

Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)

1 complete set suitable for 1 seat. Suitable for Citroen 2CV.

Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)

1 complete set bench front, and + 1x seat bench rear (8 pieces). Suitable for Citroen 2CV + Dyane. Made in Europe.

Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)

1 complete set for 2x seat in front + 1x seat bench rear (8 pieces). Suitable for Citroen 2CV + Dyane. Made in Europe.

Jute clamping cover with lateral iron wire. (The cover is mounted under the seat face + backrest)

1 complete set is for 1 seat bench. Suitable for Citroen 2CV. Fits for symetric and asymetric bench.

Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved

material (NBR/SBR fabric rubber)

Cable binder from rubber, length 155mm. Wide 35mm! For main cable harnesses to 30mm diameter. Now

manufactured from improved material (NBR/SBR fabric rubber)

cable strap, 122mm length. Made in Germany. Now manufactured from improved material (NBR/SBR fabric

rubber)

cable strap, 80mm length, Now manufactured from improved material (NBR/SBR fabric rubber)

Cable binder from rubber. Length: 160mm. Made in Germany. Now manufactured from improved material

(NBR/SBR fabric rubber)

2752 Articles | Page 28 of 56
Shipping country Shipping country