for Alle 2CV6
2752 Articles | Page 6 of 56
2CV, bonnet, catch completely. Suitable for Citroen 2CV, Installed from 1974 to 1990. The hook is
screwed onto the vehicle chassis. The hook is a South American version. Possibly the operating lever must be re-bent a little!
2CV, Bonnet, catch completely. Suitable for Citroen 2CV. Installed from 1961 to 1973. The hood
catch is screwed onto the chassis. Or.Nr. AZ86102
2CV, Bonnet, trim (aluminum) for the bonnet. Version AZAM. The trim is in the cross section easily
triangular. Length about 106cm. Wide one: 20mm. This trim fits on each 2CV starting from the year of construction 1963.
Bonnet, trim with mounting material. The trim fits on all Citroen 2CV bonnets starting from year of
construction 1961. Length about 93cm. The trim does not fit on the corrugated sheets bonnet!
2CV, bonnet hinge strip with repair sheet metal up to the Ventilation shutter. Suitable for Citroen
2CV. Good reproduction, like original. The sheet metal has the projection up to the ventilation shutter. Made in Europe.
2CV, engine bonnet hinge ledge, with repair sheet metal up to the Ventilation shutter. For Citroen
2CV. Simple reproduction. Made in Germany.
Nut in the door, for the securement of the door loop at the door, for Citroen 2CV. (All models with
high door linings and without plastic cover above).
2CV, pedal floor: Noise insulation mat on the pedal floor (as original). Self adhesive. Suitable
for Citroen 2CV with hanging pedals (until year of manufacture 1990). The insulation consists of 2 parts. First, the insulation layer is placed on the pedal floor. Then comes the heavy layer (modern bitumen, does not age, does not crack, UV-resistant, water-repellent, state-of-the-art automotive technology, but with the look of yesterday!) The heavy layer is heated slightly and then lays over the insulation. The material and manufacturing is completely "Made in Germany". The hole for the steering column must be made by yourself.
PDF FILE Rubber mat on the pedal base. Suitable for Citroen 2CV with hanging pedals. The rubber mat is
shifted instead of the bitumen and can be removed at any time again.
2CV, pedal floor plate double. Original, no replica. For all Citroen 2CV with hanging brake +
clutch pedals (used approx. 1977 to 1990). Made in France
2CV, pedal floor pan double. Strengthened version. For all Citroen 2CV with hanging brake + clutch
pedal (installed from about 1977 to 1990). The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate doubles. Strenghened version. For all Citroen 2CV with standing foot
throttle and hanging brake pedal + clutch pedal. (Installed about 1970 to 1977.) The pedal floor plate is electrolytically coated (very good rust protection). Made in Europe.
2CV, Pedal floor plate inside, with all flanges (Repair sheet metal). Very good reproduction, for
Citroen 2CV with hanging pedals. Made in Europe.
- Suitable for this article
2CV, Crossbeam fixture (gusset sheet plate) on the left for Citroen 2CV. This gusset sheet plate is
for the mounting on the left for the medium crossbeam above at the roof. Made in Europe.
2CV, Crossbeam fixture (gusset sheet plate) on the left for Citroen 2CV. This gusset sheet plate is
for the mounting on the left for the medium crossbeam above at the roof. Made in Europe.
Wheel housing at the rear left completely. (Interior fenders). Suitable for Citroen 2CV6. Good
reproduction. Inclusive Handle for rubber stop and reinforcement for seat belt attachment. Made in European Union. Final version, as original! Electrolytically galvanized.
2CV, Wheel housing at the rear left, seat belt attachment sheet metal. Suitable for Citroen 2CV
The sheet metal is double with thread for the belt connector. Often this sheet metal is rusted away. If you would like to re-tool an older 2CV with rear belts, this sheet metal must be re-tooled! Made in Europe.
Wheel housing at the rear left, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV
final version, Installed until year of construction 1990. Reproduction such as original. The rubber buffer is held by a sheet metal ring. The sheet metals are electrolytically galvanized. Suitable rubber buffer = 12046! Made in Europe.
Wheel housing at the rear left, rear axle stop buffer repair sheet metal. Suitable for Citroen 2CV
final version, Installed until year of construction 1990. Suitable rubber buffer = 12046 (a hole must be drilled in the rubber for the stud bolt)! With this version, the rubber buffer is only untwisted.
Wheel housing at the rear left, reinforcing plate for seat belt attachment rear. If a new wheel
housing 15159 is on the left welded, this reinforcing plate is missing! Suitable for all Citroen 2CV, with lap belt rear. Made in Europe.
Wheel housing at the rear right completely. (Interior fenders). Suitable for Citroen 2CV6. Good
reproduction. Inclusive Handle for rubber stop and reinforcement for seat belt attachment. Made in European Union. Final version, as original! Electrolytically galvanized.
2CV, Wheel housing at the rear right, seat belt attachment sheet metal. Suitable for Citroen 2CV
The sheet metal is double with thread for the belt connector. Often this sheet metal is rusted away. If you would like to re-tool an older 2CV with rear belts, this sheet metal must be re-tooled! Made in Europe.
Wheel housing at the rear right, rear axle stop buffer repair sheet metal. Suitable for Citroen
2CV, final version, Installed until year of construction 1990. Reproduction such as original. The rubber buffer is held by a sheet metal ring. The sheet metals are electrolytically galvanized. Suitable rubber buffer = 12046! Made in Europe.
Wheel housing at the rear right, rear axle stop buffer repair sheet metal. Suitable for Citroen
2CV, final version, Installed until year of construction 1990. Suitable rubber buffer = 12046 (a hole must be drilled in the rubber for the stud bolt)! With this version, the rubber buffer is only untwisted.
Wheel housing at the rear right, reinforcing plate for seat belt attachment rear. If a new wheel
housing 15159 is on the left welded, this reinforcing plate is missing! Suitable for all Citroen 2CV, with lap belt rear. Made in Europe.
2CV, wheel housing body edge rear on the left, (up to the rear end panel). Improved version
Heavier sheet metal and longer than our number 15198.
2CV, Wheel housing body edge at the rear left. Very often the overlapping sheet metal on the rear
end panel is rusty (beside the tail lamps). Made in Europe.
2CV, wheel housing body edge rear on the right, (up to the rear end panel). Improved version
Heavier sheet metal and longer than our number 15199.
2CV, Wheel housing body edge at the rear right. Very often the overlapping sheet metal on the rear
end panel is rusty (beside the tail lamps). Made in Europe.
2CV, Soft top hood "Sonnenland" material in black, with heating back window. Inside closing
Sonnenland" is an original supplier for Mercedes, Audi, Porsche Cabrio covers. The material is made from 3-ply fabric material from German production. In our roof are only new parts Installed. Made in France. We recommend to impregnate the roof regularly! (Article no. 20071)
VIDEO 
2CV, Soft top hood "Sonnenland" material in black, with normal back window. Inside closing
Sonnenland" is an original supplier for Mercedes, Audi, Porsche Cabrio covers. The material is made from 3-ply fabric material from German production. In our roof are only new parts Installed. Made in France. We recommend to impregnate the roof regularly! (Article no. 20071)
Soft top hood, beige, with heatable rearwindow, similar to RAL 1002
(Gazelle-Ivoire,Borelly-Nevada), for Dolly, 2cv. Made in France
Soft top hood, beige, similar to 1002, inside sand-beige (Gazelle-Ivoire,Borelly-Nevada), for Dolly
beige-wine-red, 2cv. Made in France
Soft top hood, blue, with heatable rearwindow, similar to RAL 5009, azure blue (bleu celeste), 2cv
inside closing. Made in France
Soft top hood, blue, similar to RAL 5009 azure blue (bleu celeste), for 2cv, pigeon-blue, inside
e closing. Made in France
Soft top hood, blue-green (Vert Agave) fine-serrated, 2cv inside closing Made in France. Vert Agave
is a very special colour shade, and not even remotely comparable to a RAL colour shade!
Soft top hood, dark-beige, similar to RAL 1019 grey-beige (Gris beige, beige Albatros, Vanneau)
2cv, inside closing. Made in France
Soft top hood grey-green (vert ardennes, vert embrum), hood material fine-serrated, 2cv, inside
closing. Made in France
2752 Articles | Page 6 of 56
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
