Classic car spare parts and accessories - 375

2CV, 375/425cc, engine gasket set. Bore 62 + 66mm. Installed from year of construction 1949 to

1960. Suitable for Citroen 2CV.

Ignition 123UNI is designed for all STANDARD 2CV, Dyane, AMI engines that were ever produced. The

appropriate advance-curve can be selected with a 16 position rotary-switch, behind an opening in the front of the housing. The unit will work on 6 Volt and on 12 Volt systems. The '123\UNI' is designed to work on '2CV' 9 hp, 375cc, A53, M4, A79/0, M28, A79/1 and M28/1 engines in conjunction with the stock black coil. (6 Volt type for 6 Volt battery, and 12 Volt type for 12 Volt battery) The dwell is automatically adjusted. Upon installation, the user has to check his engine plate ( "A", "AZ", "AM", "AYA", "AM2", "AYA2", "AK2", "A06/635", "A06/642", "AM2A" or "A06/664" ) and look in the manual which setting of the rotary-switch is appropriate. There also is a special setting for M28/1-engines running on LPG or on Ethanol, like 'E85' as used in Sweden. ( 'E85' contains 85 percent ethanol, and 15 percent standard fuel )

• Suitable for this article
• 
  Electronic ignition system: magnets (2 pieces) as replacement. Suitable for
  14,83 €
• 
  Isolation tape with fabric surface. This adhesive tape has been specially
  5,90 €

Piston + liner (2 pieces) for Citroen 2CV (9 hp, 375ccm). Citroen AZ. Incl. piston rings. 62mm bore.

Piston with piston rings, suitable for Citroen 2CV old with 375ccm engine! (9 HP). 62mm bore

piston rings 2,0mm + 4,0mm. Piston pin 20 x 51,8mm. Per piece!

Piston pin for Citroen 2CV. (375-425cc), 9 + 12 + 16HP. Measurement: 20x56mm. Or.Nr.: A121-4/AZ121-4

4

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (12,20mm long).

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (16,30mm long).

P 203/403/404/504, brake shoe mounting kit for servo brake (Mastervac) at rear. Suitable for

Peugeot 203, 403, 404, 504. For saloon, coupé and convertible. Consisting of: 2x 4375.16, 2x 4308.06, 4x 4312.06, 4x 4315.08, 2x 5363.01. Total length of springs: 132.5mm + 65mm.

brake hose Peugeot 204+304,104,504,505. front 09/75>10/77, length 375mm, male thread 1xM10x1

1 - female thread 1x M10x1

• Suitable for this article
• 
  clip for brake hoses, Peugeot 304, 404, 504
  2,88 €

P 304, door lining in front on the right. Color: Vinyl dark-brown, down silver (brun 3331)

Suitable for Peugeot 304 (sedan), to salon 1972. Original Peugeot, no reproduction. Or. No. 9375.30

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1965 to 1967. Or. No. 4308.13. Consisting of: 4x spring 437515. 2x spring 437517. 2x spring 437518.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  26,68 €

P 404, brake shoes mounting set. Suitable for Peugeot 404 with Hydrovac brake (Thermostable), of

year of construction 1967 to 1968. Or. No. 4308.03. Consisting of: 4x spring 437521. 4x spring 437522. Length long spring (without hooks): 23,30mm. Short spring lengthens (without hooks): 10,0mm.

• Suitable for this article
• 
  Drum spring draw hook of HAZET. If you liked to exchange the brake shoes at a
  26,68 €

P 404/504, brake hose in front + rear. Suitable for Peugeot 404, of year of construction 1969 to

1975. Peugeot 504, from 1968 to 08/1975. Peugeot 204, from 1968 to 1970. Length: 375mm. Connection: 1x male thread 3/8x24UNF. 1x male thread 5/8x18UNF with female thread 3/8x24UNF. Or. No. 4816.11 + 4816.12 . Made in Europe.

• Suitable for this article
• 
  Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault
  1,24 €

P 504, door lining in front on the left. Color: Vinyl dark red (Rouge 3301). Suitable for Peugeot

504 (sedan). Original Peugeot, no reproduction. Or. No. 9375.05

P 504, door lining in front on the right. Color: Vinyl grey (Gris). Suitable for Peugeot 504

(sedan). Original Peugeot, no reproduction. Or. No. 9375.49

P 504, door lining in front on the right. Color: Vinyl green-blue. Suitable for Peugeot 504 sedan +

BREAK. Original Peugeot, no reproduction. Or. No. 9375.66

Valve cap from aluminum, for Citroen 2CV! These valve caps are installed on 375cc, 425cc, 435cc

engines. On the 435cc engines only a short time.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which
  3,57 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Carburetor sealing set for Citroen 2CV starting from year of construction 1949. Engines with 375 +

425 cc capacity. Carburetor SOLEX 28IBC.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Seal under carburetor, distance plate. Installed in Citroen 2CV with 375 + 425cc with round

carburetor. Inside diameter 28mm. Or.Nr.: AZ142-98

Flywheel, new part (heavy version). Suitable for Citroen 2CV6, from 1970 to 02/1982. Weight

approx. 12kg. Also suitable for Citroen Dyane, AK, AMI. All 602cc engines with front drum brake. Or. No. AY8312-000.

• Suitable for this article
• 
  Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For
  137,74 €
• 
  Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from
  3,56 €