2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan
Suitable for Citroen 2CV6 + 2CV4.
for Citroën 2CV ACDY
1677 Articles | Page 2 of 34
2CV6, exhaust clip rear muffler. Specially strong U-shaped bracket clip, maximum diameter of the
exhaust pipe: 36mm. Suitable for Citroen 2CV6.
2CV, screening plate at the exhaust (simple reproduction), for the protection the hand brake cable
Suitable for Citroen 2CV6 + 4. this sheet metal is mounted original at the 49mm clip at the front muffler. Made in Germany.
Screening plate at the exhaust, for the protection for the parking brake cable. Suitable for
Citroen 2CV. This sheet metal is mounted original at the 49mm clip at the front muffler. The sreening plate have long holes, so it can be mounted the different versions of the 49mm clip.
2CV6, exhaust clip 47mm, for the securement front muffler down to the elbow pipe (S-pipe). Suitable
for Citroen 2CV6 + 2CV4. Or.Nr.: AM1826B
2CV6, exhaust clip 47mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchanger to
the front muffler. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, front silencer. Brand manufacturer from Europe. Suitable for Citroen 2CV6, Dyane 6, AMI and
Mehari. According to our more than 35 years of experience, the only front silencer for the 2CV that fits really well.
2CV6, valve spring outside (large spring), for inlet + exhaust valve Citroen 2CV6. Outside
diameter: 31,5mm. Height: 47,5mm. Or. No. AM124-25A
2CV6, heat exchanger, left + right (1 pair). Good reproduction made of stainless steel. The heat
exchangers are like the original, and also have the foam on the flaps. But the 2CV with stainless steel heat exchanger sounds slightly different (louder, more metallic). Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990, not suitable for 2CV4.
2CV6, heat exchanger, left + right (1 pair). Good replica. The heat exchangers are like the
original, and also have the foam on the flaps. The heat exchangers are black powder coated. Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990. Not suitable for 2CV4.
2CV6, heat exchanger (heat exchanger), exhaust pipe on the left in the heat exchanger. As
substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
2CV6, heat exchanger, exhaust pipe on the right in the heat exchanger. As substitute for
through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
Cap for the radius arm bearing rear (for vehicles with a brake line spiral in the rear axle)
Suitable for Citroen 2CV, Dyane, AK, AMI, starting from year of construction 06/1970.
Cover plate fur the accelerator box for the Choke, for oval carburetor 2CV6 (If the pump is missing
or is defective.) Made in Germany.
ACDY, floor pan on the left completely, with all connectors and reinforcement cross-beams. The
sheet metal is electrolytically galvanized! Suitable for Citroen ACDY. Made in Europe.
ACDY, floor pan on the right completely, with all connectors and reinforcement cross-beams. The
sheet metal is electrolytically galvanized! Suitable for Citroen ACDY. Made in Europe.
ACDY, Rear end panel cross-beam completely for Citroen ACDY. The cross-beam has 2 holes for the
bumper. Made in Europe.
ACDY, tail gate on the left, reproduction. Suitable for Citroen ACDY. The door is electrolytically
galvanized! Made in Europe.
ACDY, tail gate on the right, reproduction. Suitable for Citroen ACDY. The door is electrolytically
galvanized! Made in Europe.
ACDY, tail gate, emblem "ACADIANE " 2CV. Original-faithful reproduction made of metal. The emblem
is self adhesive. Measurements: 35x155mm
ACDY, cross-beam crosswise in front - center, under the box body for Citroen ACDY. (Height of spare
wheel fixture). 1 version, length about 124cm.
ACDY, interior fender completely (inclusive rear axle stop + bulkhead) at the rear left in the box
body. Suitable for Citroen Acadyane. 1617mm lengthens. Made in Europe.
ACDY, interior fender completely (inclusive rear axle stop + bulkhead) at the rear right in the box
body. Suitable for Citroen Acadyane. Length=1617mm. Made in Europe.
ACDY, backwall at the rear left in the box body. From top to bottom. Suitable for Citroen ACDY
Manufactured in manual work in the European Union.
ACDY, backwall at the rear right in the box body. From top to bottom. Suitable for Citroen ACDY
Manufactured in manual work in the European Union.
Axle fixing bolt safety sheet. Suitable for Citroen 2CV. Per piece. The sheet metals are easily
bended at the end. So it`s easy to mount. Made in Germany.
Fixing bolt suitable for the axles, for Citroen 2CV, AK, DYane, ACDY, AMI. Length: 135 mm
Galvanized. Tensile strength 10.9. Fits for the front and rear axle! Note: The screws must absolutely have this high tensile strength. A lot of people offer a normal screw with 8.8 tensile strength.
Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor
quality. Tightening torque: 343-392Nm.
Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening
torque: 343-392Nm. Original Citroen! The better choice.
1677 Articles | Page 2 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
