Citroen-2CV / AK/AZU / main brake cylinder

Brake fluid reservoir seal for the locking cap (2 circle). Suitable for Citroen 2CV, with LHM double circle brake system.

Quality: 3

Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV to year of construction 1963. Peugeot 202, 203, 403, 404. Renault rear engine, R4. Diameter: 57mm. Reservoir height with locking cap: 97mm. Threaded connection on the master brake cylinder: 3/4 16h. Made in Spain.

Quality: 2

Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV with front drum brake. Diameter: 57mm. Reservoir height with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5. Made in Spain.

Quality: 2

• Suitable for this article
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV6 with front drum brakes. The reservoir is white dyed and has a white lid. The connection on the master brake cylinder is from center to center: 70mm.

Quality: 3

Brake fluid reservoir with locking cap, for the brake system LHM. Suitable for Citroen 2CV, Dyane, AMI8 with front disk brake system and single circuit brake system. Diameter: 56mm. Reservoir height with locking cap: 100mm. Threaded connection on the master brake cylinder: M16 x 1,5. Made in Spain.

Quality: 2

• Suitable for this article
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Brake fluid reservoir connection rubber. For the connection from the glass container to the master brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 6.0mm. This system of the securement was used by many france classic car`s. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.

Quality: 3

Brake fluid reservoir connection rubber. For the connection from the glass container to the master brake cylinder. Dimension: Diameter above: about 20-21mm. Diameter down: about 12mm. Inside diameter down: 8.0mm. This system of the securement was used with many französichen car. E.G. Citroen 11CV + 15CV, Citroen HY, Citroen Ami. Peugeot + Renault.

Quality: 3

Brake cylinder paste of FÖRCH, 5g. Full-synthetic brake cylinder paste for hydraulic brake systems. Durability of brake cylinders is extended. Protects against corrosion. Compatibly with the brake fluids DOT 3, DOT 4 and DOT 5.1. Keeps lubricated collars. Assembly aids for O-rings, lip seals, collars and others. Sealing components from elastic materials.

Quality: 1

Cap for a brake fluid reservoir from glass. Thread about 44mm. Suitable for Citroen 11CV, 2CV, HY, Panhard, Peugeot 203, 403, 404.

Quality: 3

Nut M9. Securement master brake cylinder (hanging pedals, for 1 + 2 circle master brake cylinder). Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Toothed washer 9 mm. Or. No. Citroen 7903056125
  0,71 €

Master brake cylinder fixing bolt (in the front wall). Suitable for Citroen 2CV with hanging brake pedal. The screw are the same, if you have a single circuit brake system or dual circuit. Also for LHM and DOT brake system.

Quality: 4

Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circuit brake system (DOT + LHM). Very good reproduction, from foam rubber. Or. No. AM453-211. Made in Germany.

Quality: 3

Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with single circuit brake system and hanging brake pedal. Or.Nr.: A453-211. Made in Germany.

Quality: 4

Master brake cylinder rubber seal (1 pair, green dyed)) for the brake fluid reservoir. Brake system LHM. Dual circuit brake system. Suitable for Citroen 2CV6 starting from year of construction 9/1981. Reproduction!

Quality: 3

Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for Citroen 2CV6 + 2CV4 with hanging brake pedal. (for the brake system LHM + DOT). Per piece

Quality: 4

• Suitable for this article
• M9, nut M9x1,25. For example mounting drive shaft at the gearbox for 2CV. Amount: 9mm.
  1,83 €
• Screw M9x65
  7,83 €

Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV starting from year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 20,63mm (13/16 inch).

Quality: 3

• Suitable for this article
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €

Master brake cylinder repair set, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV to year of construction 1963. The repair set contains all sealing rubbers. For piston diameters: 22mm.

Quality: 2

• Suitable for this article
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €

Master brake cylinder repair set. Brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV to year of construction 1981. The repair set contains all sealing rubbers. For piston diameters: 20,63mm.

Quality: 3

• Suitable for this article
• Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for Ci
  2,93 €

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, AZU, AK, of year of construction 05/1967 to 1973. Hanging brake pedal! Piston diameter: 19,0mm. Brake line connector: 2x 9,0mm (M9). Or. No. AY453-03D + AY453-03E. Note: The master brake cylinders are converted from us on a better base valve (residual stress valve).

Quality: 3

• Suitable for this article
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, to year of construction 1963. Piston diameter: 22mm. Brake line connector: 1x M12x1. Connection brake fluid reservoir: M16x1,5. Or. No. AM45303. Made in Spain.

Quality: 2 360°

• Suitable for this article
• Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.
  0,51 €
• Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV with
  15,77 €
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, with being pedals. Piston diameter: 22mm. Brake line connector: 1x M12x1 + 1x M10x1mm. Connection brake fluid reservoir: M16. Very rare export version! This master brake cylinder was used also as clutch master cylinder at 2CV Sahara!

Quality: 4 360°

• Suitable for this article
• Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.
  0,51 €
• Brake hose copper sealing ring. Dimension: 10 x 16 x 1mm.
  0,51 €
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Master brake cylinder, brake system DOT. Single circuit brake system. Piston diameter: 19,0mm. Brake line connector: 8,0mm. Suitable for Citroen 2CV, of year of construction 11/1970 to 7/1976. Hanging brake pedal! Made in Europe.

Quality: 3 360°

• Suitable for this article
• Brake line seal + hydraulic line seal (socket) red. For DOT brake fluid + LHS (red hydraulic fl
  0,49 €

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of year of construction 1963 to 1967. Piston diameter: 22mm. Brake line connector: 1x M9 + 1x M12. Connection brake fluid reservoir: M16x1. Made in Spain.

Quality: 2 360°

• Suitable for this article
• Brake hose copper sealing ring. Dimension: 12 x 18 x 1,5mm.
  0,51 €
• Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with stan
  3,92 €
• Brake hose seal DOT (red). For DOT brake system (normal brake fluid DOT4). 4,5mm line (connecto
  0,70 €
• Copper seal type A, (full copper). 16x22x1,5mm.
  0,48 €

Master brake cylinder, brake system DOT. Single circuit brake system. Suitable for Citroen 2CV, of year of construction 1972 to 1973. For Citroen AMI 6, different years of construction. Dyane, different years of construction. Hanging brake pedal. Piston diameter: 20,64mm. Brake line connector: 1x above M9x1,25. At the front side 1x port M12x1 for a brake hose.

Quality: 2 360°

• Suitable for this article
• Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for Citroen 2CV with
  15,77 €

Master brake cylinder, brake system DOT. Dual circuit brake system. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Label manufacturer! Made in Spain.

Quality: 2 360°

• Suitable for this article
• Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for Ci
  2,93 €
• Master brake cylinder fixing bolt (in the front wall). Suitable for Citroen 2CV with hanging br
  7,83 €
• Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circu
  4,51 €

Master brake cylinder, brake system DOT. Dual circuit brake system. Piston diameter: 20,6mm. Brake line connector: 2x 8,0mm. Suitable for Citroen 2CV, of year of construction 1976 to 9/1981 (vehicles with drum brake in front). Reproduction. Made in Europe.

Quality: 3 360°

• Suitable for this article
• Master brake cylinder metal sleeve, for the connector in the engine front wall. Suitable for Ci
  2,93 €
• Master brake cylinder seal in the engine front wall. Suitable for Citroen 2CV with a dual circu
  4,51 €

Collar for the master brake cylinder (for 1 inch (25,4mm) master brake cylinder). Suitable for Citroen 11CV to year of construction 07/1952. Citroen HY. Citroen 2CV. Peugeot P203. Renault Fregate etc. Dimension: 36 x 54mm.

Quality: 3

Master brake cylinder collar outside (seal to the push rod). Suitable for Citroen 2CV with standing brake pedal. (fifties + sixties)

Quality: 3