washing system for Citroën 2CV AK-AZU
54 Articles | Page 1 of 2
Rubber socket for the wiper system nozzle, large version. Suitable for Citroen DS, starting from
year of construction 1967. Citroen 2CV, all models. Inside diameter: 6,0mm. Outside diameter: 16mm. For sheet metal bore: 11mm.
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Washer reservoir electrical with built-in set for 2CV and other classical cars. Complete with
h push-button, cable, cross bars etc. very practical and small. Width 19,5cm, height of 16,5cm, depth 5,5cm
Washer reservoir with integrated, electrical water pump. 12 V. Capacity: 1.2 L. width: 122mm
overall height totally: 185mm. Building depth altogether: 100mm. The reservoir is supplied with fixture. The fixture is from the rear at the reservoir.
Washer reservoir, rubber bushing above in the cap (for the hose). Suitable for Citroen DS, HY, 2CV
etc. dimension: 5 x 18 x 4mm.
Windscreen washer reservoir, suitable for Citroen 2CV, AK. This windscreen washer reservoir looks
like the original reservoir. Of course, it does not have an electric windscreen washer pump. Everything remains as it was.
Wiper system nozzle chromium-plates. Suitable for all Citroen 2CV starting from year of
construction 1961. Also suitable for many classical Peugeot. (403). Bore for the nozzle must be 8-9mm.
Wiper system nozzles - upper part (with one water ejection nozzle)! Suitable for 2CV, Dyane, HY, DS
S (DS Installed to year of construction 1969!). M 7x1mm
Wiper system nozzles - lower part, from brass. With additional connection for a hose. Suitable for
Citroen DS, to year of construction 1969. In addition, this additional connection is very practical for Citroen DS, HY etc.. Mounting hole: 7,0mm.
Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Windscreen washer foot pump seal. This is the seal that is fitted under the foot pump (seal to the
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Windscreen washer foot pump. Suitable for Citroen 2CV up to year of construction 1970 (depending on
country of delivery). Citroen Dyane + Acadiane. Attention: The pump has only 1 line connection.
Disk washing water hand pump, reproduction, 5mm. This pump is mounted in the dashboard. In
addition, the pump is a reproduction of the first version, and can installed into a Citroen 2CV6 and partial in a Renault R4 .
Windscreen washer hand pump with hose. Looks like the original. This pump is mounted in the
dashboard. The pump corresponds to the original hand pump as it was mounted in the 2CV6 until the year of construction 1990. Or. No. AZ864-209A. This pump was also installed in the Citroen ID19 until the year of construction 1962 (DM564-9) and the Citroen HY. Please note: The pump has 3 connections: 1x inlet and 2x outlet. For the 2CV with the enclosed T-connector, please bridge 1x (see photo 2 in the shop).
Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Wiper arm from high-grade steel, for Citroen 2CV. The wiper arm is straight and not bent! The wiper
r mounting is twisted around 90°. The arm is for the old, rigid wiper blades. (16017 + 90987)
Wiper arm black paints, for Citroen 2CV. The wiper arm is straight and not bent! The wiper mounting
is twisted around 90°. The arm is for the old, rigid wiper blades. (16017 + 90987).
Wiper arm chromium-plates, for Citroen 2CV, final version for elastic wiper blades! Installed to
year of construction 1990. The wiper arms do not fit for rigid wiper blades!
Windshield wiper linkage retaining ring. For the securement of the wiper linkage at the wiper axle
Suitable for Citroen 2CV.
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
Wiper axle for Citroen 2CV4 + 2CV6. New part. Complete repair set, inclusive connector nut, rubber
seal etc., for 1 axle!! Improved version! Made one in European Union. Connector nut + disk are not chromium-plated, they are only silver!
Wiper axle 2CV4+6, without mounting material. (Nuts, sealing ring), reproduction. Suitable related
d accessory: 14154 sealing rubber, 14247 chrome cap, 14152 nut outside, 14157 nut inside, 14155 tie-clip for wiper axle.
Wiper axle chrome ring, Citroen 2CV, HY. Is mounted over the sealing rubber of the wiper axle
Reproduction. Per piece.
Wiper blade from polished high-grade steel. Suitable for Citroen 2CV, to year of construction 1990
The wiper blade is spring-loaded. Length: 240mm. We let these wiper blades manufacture particularly for 2CV, and they have the original length of only 240mm! Per piece.
Wiper blade elastic, 2 fittings, for Citroen 2CV. Original Valeo! (V.24) Wiper blade length
25,50cm. The wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings. Stuffing contents: 2 fittings!
Wiper blade elastic, per piece, for Citroen 2CV. Original Valeo. Wiper blade length 25,5cm. The
wiper blade fits for wiper arms with straight lines mounting and also for 90° twisted mountings.
Chromium-plates wiper blades and wiper arms (2 fittings). Suitable for Citroen 2CV. This set
contains the wiper blades and arms from our own production.
Wiper blades elastic, from high-grade steel. (1 pair). Suitable for Citroen 2CV, which are equipped
with our wiper arms from high-grade steel (16832).
- Suitable for this article
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with angular wiper engine.
Wiper engine propulsion lever (transmission lever), for the connection to the wiper linkage
Suitable for Citroen 2CV6, Dyane, Mehari, with round wiper engine.
54 Articles | Page 1 of 2
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
