rear body components for Citroën 2CV AK-AZU
49 Articles
AK400, Rear end panel cross-beam completely, (rear end panel) for Citroen AK400. The cross-beam is
electrolytically galvanized and has 4 holes for the bumper. Wide 1390mm, height outside 85mm, depth 80mm. Ori.Nr. AU832-3. Made in Europe.
AK400, interior fender at the rear left in the box body (without rear axle stop)! Suitable for
Citroen AK400. Length=1617mm. Or.Nr. AK821-5B. Manufactured in manual work in the European Union.
AK400, interior fender at the rear right in the box body (without rear axle stop)! Suitable for
Citroen AK400. Length=1617mm. Or.Nr. AK821-5C. Manufactured in manual work in the European Union.
AK 400, trunk floor with cross-beams, completely for long box body. For Citroen AK 350 + 400. This
very high quality, own reproduction, is supplied completely with all lower reinforcement cross-beams. (without the rear cross-beam). Everything so, like original.
AK400, backwall at the rear left in the box body. Suitable for Citroen AK400. Very high quality
With all threads, reinforcement cross-beam, cable harness locking collars. Like original. Overall length: about 128,5cm. Made one by "Der Franzose".
AK400, backwall at the rear right in the box body. Suitable for Citroen AK400. Very high quality
With all threads, reinforcement cross-beam, cable harness locking collars. Like original. Overall length: about 128,5cm. Made one by "Der Franzose".
AK400, square profile (square cross-beam) on the left, centrically, lengthwise over the box body
Suitable for Citroen AK400. Made in Europe.
AK400/ACDY, rear end panel for Citroen AK400 + ACDY. It is only the rear sheet metal of the
cross-beam, not the whole cross-beam. 4 holes for the bumper securement. Made in Europe.
AK400/ACDY, square profile (square cross-beam) on the right, centrically, lengthwise over the box
body. Suitable for Citroen AK400 + ACDY. Made in Europe.
AK400/AZU, backwall centrically over the tail gates, in the box body. Suitable for Citroen AK400 +
AZU. The sheet metal does not have a license plate mounting! Very good processing. Inclusive sheet metal brackets for the cable harness, rainwater gutter, cross-beam etc. Made by "Der Franzose". Made in Europe.
AK, cross-beam crosswise rear, under the box body, for Citroen AK400, AK350. Overall length: 965mm
width: 110mm, height 60mm. Or. No. AK832-73
AK 400, cross-beam crosswise in front, under the box body (direct behind the driver's cabin)
Sutiable for Citroen AK400, AK350, AK250. Or.Nr. AK832-82A
AK, cross-beam under the baggage compartment floor. Suitable for Citroen AK400, AK350, AZU250. (in
the height of the spare wheel fixture). Or.Nr. AK832-81
AK/ACDY, spare wheel cover with mounted lock, suitable for Citroen AK400 + ACDY. Large corrugated
sheet metal. Made in Europe.
AK/AZU/ACDY, closing sheet from downside, for the rear end cross-beam (our number 15380, 15398
15445). Suitable for Citroen AZU, AK, ACDY. Or. No. AZU832-5
AZU, interior fender at the rear left, in the box body! Suitable for Citroen AZU. 1417mm lengthens
Or.Nr. AZU821-5B. Manufactured in manual work in the European Union.
AZU, interior fender at the rear right, in the box body! Suitable for Citroen AZU. 1417mm
lengthens. Or.Nr. AZU821-5C. Manufactured in manual work in the European Union.
AZU, spare wheel hood for Citroen AZU 250. Small corrugated sheet. The sheet metal is
electrolytically galvanized! Made in Europe.
AZU, backwall at the rear left for Citroen AZU. 1x opening for rear light. The sheet metal goes
completely from downside to above in the box body. Overall length: about 117,5cm.
AZU, rear panel rear left for Citroen AZU. The sheet metal goes completely from the bottom to the
top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.
AZU, backwall at the rear right for Citroen AZU. 1x opening for rear light. The sheet metal goes
completely from downside to above in the box body. Overall length: about 117,5cm.
AZU, rear panel rear right for Citroen AZU. The sheet metal goes completely from the bottom to the
top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.
AZU, side panel on the left (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out
of sheet metal. Or. No. AZU825-95B
AZU, side panel on the right (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out
of sheet metal. Or. No. AZU825-95C
AZU, tank panel for Citroen AZU 250. Small corrugated sheet. The sheet metal is electrolytically
galvanized! Made in Europe.
AZU, square profile (square cross-beam) on the right, centrically, lengthwise over the box body
Suitable for Citroen AZU 250. Made in Europe.
49 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
