Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw
measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
for Citroën 2CV AMI6-8
1736 Articles | Page 1 of 35
Oil pressure switch for Citroen 2CV starting from year of construction 1965. Response pressure 0,50
0,60. Thread M12 x 1,50. Electrical connection: Flat plug 6,35mm.
Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil
filters! Thread: M14x1,5.
Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505
J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!
Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet
metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20
Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil
dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a
Oil pressure switch for Citroen 2CV6, Installed starting from year of construction 1965. Response
pressure 0.50 bar. Thread M12 x 1,50. Electrical connection: Round plug 4mm.
Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)
Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm
(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6
Oil filter for Citroen 2CV. Original or brand supplier (Valeo or Mecafilter-Purflux). (No replica)
Suitable for Citroen 2CV + Visa 652, from model year 09/1971 on
VIDEO 
Oil filter adapter screw for Citroen 2CV. For replacement to use of a larger oil filter in the
summer and a small oil filter in the winter. Scope of delivery: 1x adapter screw, 1x oil filter largely, 1x oil filter small.
PDF FILE Oil filler neck seal down. (Connector on the engine block). Suitable for Citroen 2CV4+6. center
hole diameter about 28,5mm. Connector center to center, about 49mm
Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler line in the connector
in the engine block. Suitable for Citroen 2CV6 + 2CV4. Measurement: 10,5x13,6x12,5mm
Oil line double seal M7 for the hollow bolt. (Connector of the oil line at the cylinder head)
Suitable for Citroen 2CV.
Oil pump for 2CV6, reproduction, inclusive Aluminum casing. Pump impeller is 10.5 mm heavily. For
all 602cc engines. 2CV, Dyane
Oil filter for Citroen 2CV. Reproduction. Suitable for Citroen 2CV + Visa 652, starting from year
of construction 09/1971.
Suction screen engine oil, mounts in the oil pan. Reproduction. Suitable for 2CV6 starting from
year of construction 10/1970. Or.Nr.: AM2226A
Sender for an auxiliary oil temperature instrument (VDO). The sender is mounted in place of the oil
drain screw. Suitable for Citroen 2CV.
Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1973
Consisting of spring, ball, ball fixture, slip piece (11,24mm diameter, 16mm long, 1 Version). Or. No. 1A 5411408C
Oil line hollow bolt 2CV6, M7, for the connector at the cylinder head. (small bore 0,7mm). Lenght
18mm, like original. Significant reproduction from the European Union.
Oil line hollow bolt 2CV6, M7, for connector at the engine block. (large bore 2,0mm). Significant
reproduction from the European Union.
Oil pump for 2CV6 (from year of construction 11/1970), inclusive Aluminum casing + cover plate
Made in Europe. The pump impeller is 10.5 mm heavily. For all 602cc engines. 2CV, Dyane, Mehari, AMI8.
Oil line hollow bolt (extends, for defective thread) 2CV6, M7, for the screwed joint at the
cylinder head (small bore. 0,4mm). Length: 26mm. Thus a deeper thread can be bored, if the original thread is defective. High-quality reproduction from the European Union.
Oil cooler tool (to loosen the union nut of the oil line that goes into the engine block). Suitable
for Citroen 2CV6 + 2CV4. Dyane, Mehari, AMI (it is possible to mount the oil cooler without dismantling the engine fan housing)
Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1973
Consisting of spring, ball, ball fixture, slip piece (11,74mm diameter, 16mm long). Or. No. 75508466
Oil pressure valve repair set for Citroen 2CV6. Installed starting from year of construction 1971
Consisting of spring, ball, ball fixture, slip piece (11,40mm diameter, 16mm long, 2 version). Or. No. 1A 5411409N
1736 Articles | Page 1 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
