for Citroën 2CV AMI6-8
12-volt cigarette lighter. Universally compatitble. Installation opening: 27.5 mm. Good quality
Also ideal as a car socket for 12-volt devices.
2CV old, exhaust pipe under the fender in front on the left. Suitable for Citroen 2CV4 old, AZU to
07/1972. (16hp). Or.Nr.: AZ18299
2CV old, exhaust pipe under the fender in front on the right. Suitable for Citroen 2CV with on the
right side mounted exhaust! Or. No. AK182-4
2CV, 602ccm, engine gasket set without shaft seals. Installed from year of construction 1961 to
1969. Suitable for Citroen 3CV, Dyane, Ami6. Engine M28/1.
2CV, Luggage compartment hood. Emblem "CITROEN" swung, from 3mm high-grade steel. Made in Germany
by Franzose. The signature is about 180mm long, and 65mm highly. The emblems are fastened with 2x M3 nuts (our article number 20166).
2CV, Fender in front, fixing clip for the starting crank. By the Citroen 2CV up to 1970, was
fastened the starting crank inside to the fender.
2CV, Bonnet, retaining rubber (bearing) for the bonnet support, in front at the head light bracket
Suitable for Citroen 2CV starting from year of construction 1961. Citroen AMI6
2CV, plate for the valve spring. Suitable for Citroen 2CV. Diameter: 30mm. Height over everything
7,50mm. Or. No. AM124-11C
2CV, Door lock, key blank, for Citroen 2CV starting from year of construction 9/1974, for vehicles
without starter button! Shank lengthens: 17,3mm. Shank-wide: 7,0mm.
2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing. Suitable for
Citroen 2CV6 starting from year of construction 1970 to 1990. Label quality
2CV6, 602ccm. Engine gasket set without shaft seals. For Citroen 2CV6 (to production end) and 2CV4
with 435ccm engine. Label manufactor.
2CV6, tail pipe securement rubber short. This rubber is for the centric securement. Hole spacing
about 60mm. Suitable for Citroen 2CV6. Made in Germany.
2CV6, tail pipe exhaust clip, for Citroen 2CV6 + 2CV4. These clips are pushed over the tail pipe
e and hold the exhaust retaining rubber. Screw connection: M6
2CV6, rear muffler locking collar, from high-grade steel. Suitable for Citroen 2CV. (the bracket
locates the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear muffler locking collar, made of metal. Suitable for Citroen 2CV. (the bracket locates
the rubber to the silencer). Or.Nr.: AM18388. Made in Germany.
2CV6, rear silencer (long silencer). Good reproduction. Brand manufacturer from Europe. Without
mounting material! Suitable for Citroen 2CV6 + 2CV4, Dyane, AMI and Mehari.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the upper, rear handle, which is
locked under the floor pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, from high-grade steel! That is the lower, rear handle, which is
locked under the floor pan. Note: Connector with 6mm screws! Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, rear, galvanizes! That is the upper, rear handle, which is locked under
the floor pan. Suitable for Citroen 2CV6 + 2CV4. Dyane, AK
2CV6, exhaust fixture rear, galvanizes! That is the lower, rear handle, which is locked under the
floor pan. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust fixture 2CV6, in front, from high-grade steel! The handle is locked under the floor
pan. Suitable for Citroen 2CV6 + 2CV4. Made in Germany.
2CV6, exhaust fixture 2CV6, in front, galvanizes. The handle is locked under the floor pan
Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip rear muffler. Specially strong U-shaped bracket clip, maximum diameter of the
exhaust pipe: 36mm. Suitable for Citroen 2CV6.
2CV, screening plate at the exhaust (simple reproduction), for the protection the hand brake cable
Suitable for Citroen 2CV6 + 4. this sheet metal is mounted original at the 49mm clip at the front muffler. Made in Germany.
Screening plate at the exhaust, for the protection for the parking brake cable. Suitable for
Citroen 2CV. This sheet metal is mounted original at the 49mm clip at the front muffler. The sreening plate have long holes, so it can be mounted the different versions of the 49mm clip.
2CV6, exhaust clip 47mm, for the securement front muffler down to the elbow pipe (S-pipe). Suitable
for Citroen 2CV6 + 2CV4. Or.Nr.: AM1826B
2CV6, exhaust clip 47mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm, for transition manifold to heat exchanger and transition heat exchanger to
the front muffler. Suitable for Citroen 2CV6 + 2CV4.
2CV6, exhaust clip 49mm. The clip is extremely stable and from cast iron. The clip seizes
s completely around the cone of the exhaust and seals so much better. Suitable for Citroen 2CV6 + 2CV4.
2CV6, front silencer. Brand manufacturer from Europe. Suitable for Citroen 2CV6, Dyane 6, AMI and
Mehari. According to our more than 35 years of experience, the only front silencer for the 2CV that fits really well.
2CV6, valve spring outside (large spring), for inlet + exhaust valve Citroen 2CV6. Outside
diameter: 31,5mm. Height: 47,5mm. Or. No. AM124-25A
2CV6, heat exchanger, left + right (1 pair). Good reproduction made of stainless steel. The heat
exchangers are like the original, and also have the foam on the flaps. But the 2CV with stainless steel heat exchanger sounds slightly different (louder, more metallic). Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990, not suitable for 2CV4.
2CV6, heat exchanger, left + right (1 pair). Good replica. The heat exchangers are like the
original, and also have the foam on the flaps. The heat exchangers are black powder coated. Attention: The heat exchangers fit only on the Citroen 2CV6 (Dyane, Mehari, AK, AMI8), until 1990. Not suitable for 2CV4.
2CV6, heat exchanger (heat exchanger), exhaust pipe on the left in the heat exchanger. As
substitute for through-rusted pipes. Caution, it is only the pipe, not the kompette heat exchanger.
