for Citroën 2CV AMI6-8
1728 Articles | Page 35 of 35
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug seal for Citroen 2CV6, diameter: 38mm. (Seal spark plug to engine cowling). Quality
after production from Europe.
Spark plug wrench (adjustable in length), for 20,8mm spark plugs. This key is perfect for the
Citroen DS. It can be used with the normal electrode extension. Fitting for 3/8 inch ratchet (medium size). Fits of course also on all other spark plugs, for 21mm tools. Manufacturer: HAZET. Adjustable length from: 137,5mm to 157,5mm and 195,5mm. With spark plug holding rubber.
Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS
Peugeot 203, 403, 404, 504. Workshop quality!
Starter lock blank key. Suitable for Citroen Acadiane from year of construction 1978 to 1987. Dyane
from 1967 to 1979. Citroen SM. AMI6 from 1961 to 1969. AMI8 from 1969 to 1979. CX from 1981 to 1984. GS starting from 1970. For starter lock manufacturers: VACHETTE. Please note the cross section of the key bit. Shaft length: 32,80mm. Shaft width: 7,6mm.
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 2 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Ignition lock in the dashboard, for Citroen 2CV with starter button (with 4 connections). The
ignition lock also fits in the Citroen DS until 1967, AMI6 and Citroen HY. Reproduction, incl. 2 keys.
Ignition lock key blank, suitable for Citroen 2CV, DS, HY. (small version, ignition key has the
size of door keys, for vehicles with starter button). Shaft length: 17,3mm. Shaft width: 7,0mm.
Ignition coil Citroen 2CV, 12 Volt, reproduction. This optically original ignition coil has an
epoxy (plastic) filling as resistor instead of an oil filling (as resistor between the primary and secondary coil). Some swear by it (and sell it as a performance ignition coil), others prefer the original ignition coil (our 14307, was installed 7 million times in new 2CVs) or our 14395 (this is a real high-performance ignition coil). We ourselves drive all our 2CV's with the 14395 coil!
Ignition coil Citroen 2CV, 12 Volt, original manufacturer. No replica! If the 2CV stutters, the
ignition coil is often to blame!
Ignition coil, for Citroen 2CV with 6 V technology, this coil is also in first Citroen DS
Installed, which has still 6 V technology. (in the DS are 2 ignition coils installed!)
Ignition coil bracket left, reproduction. Suitable for Citroen 2CV + Citroen DS with 6 V
technology. Synthetic black.
Ignition coil bracket left, reproduction. Suitable for Citroen 2CV + Citroen DS with 6 V
technology. Synthetic black.
Centrifugal weights ignition timing, reproduction, original not available any more, per piece, bad
d reproduction. 2CV after 1967.
Distributor cam of the ignition, for Citroen 2CV6. Very bad reproduction. We recommend the
replacement on an electronic ignition.
Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs
coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!
Brake cylinder hone. For use with a cordless drill to clean brake cylinders during service
22-69mm. For honing out brake cylinders. For use with a standard drill.
Engine cylinder hone. Enables the inside surface of the cylinders to be cleaned of carbon deposits
etc. Suitable for all cylinders with a bore diameter of 50
Cylinder head left, new part. Suitable for Citroen 2CV6, Dyane6, Mehari. The cylinder head is
supplied with valve push rod tubes, valves and rocker arms.
Cylinder head right, new part. Suitable for Citroen 2CV6, Dyane6, Mehari. The cylinder head is
supplied with valve push rod tubes, valves and rocker arms.
1728 Articles | Page 35 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
