Wheel cover set completely, consisting of 4x wheel covers, 4x wheel cover screw, 4 x box nut)
Suitable for Citroen 2CV. Note: The wheel covers can only fit, if you have short wheel nuts!
for Citroën 2CV AMI6-8
1736 Articles | Page 25 of 35
Wheel cover screw from high-grade steel, for Citroen 2CV. Original Citroen. Better treats with than
our No. 16812. Thread M 10 x 13mm, for wrench 19mm.
Wheel cover screw washer from synthetic, M10, for Citroen 2CV. These disks were in former times
original under the screw and prevent scratches and contact corrosion! Per piece.
Wheel bearing suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. Not suitable for the normal Citroen
2CV. Manufacturer "Der Franzose". Measurement: 36 x 76 x 29mm. The wheel bearing fits for the front axle + rear axle.
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically
constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
Wheel nut short, galvanized, suitable for Citroen 2CV, Dyane, Mehari, AMI. Measurement: M12 x 1,25
Is suitable up to 45 NM torque (2CV). Please lubrify before mounting. Replica
Wheel nut long, galvanizes, suitable for Citroen 2CV. Measurement: M12 x 1,25. Tightening torque
40-50 nm. Caution: hub caps cannot be used with short wheel nut`s!
Rear wheel hub: Threating die for recutting the thread of the rear wheel hub - brake drum (where
the 44 nut is mounted). Suitable for all Citroen 2CV, Dyane, AK, AZU, ACDY, AMI 6+8, Mehari. Very good workshop quality!
Rear wheel hub: die holder (winch) for recutting the thread of the rear wheel hub - brake drum
Very good workshop quality!
Wheel plate (wheel hub in front). Suitable for Citroen 2CV from the seventies to year of
construction 1990 (For wheel bearings with an outer diameter of 72 mm. Fine splines for the drive shaft mounting.
Chassis reinforcement set for the original chassis of Citroen 2CV. These sheet metals are welded
outside, behind the front axle. Made in Germany.
Friction shock absorber sheet metal plate (the lower, to the radius arm indicating). Suitable for
Citroen 2CV. Or.Nr.: AM43682
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire 135/15 with 20mm white wall. Manufacturer Michelin. The white wall is later up-vulcanizes
Delivery time about 2-4 weeks.
Tire (reproduction) mounts on a new rim, R125/15. The Vee tire resembles optical the Michelin
profile. We use only our own, series-identical rims and no reproduction rims! Suitable for Citroen 2CV.
Tire mounts on a new rim, R135/15. Manufacturer Michelin. We use only our own, series-identical
rims and no reproduction rims! Suitable for Citroen 2CV, AK, Dyane, AMI.
Tire R135/15 ZX. Manufacturer Michelin. Summer tire. Suitable for Citroen 2CV, AK, AMI, Mehari
Renault Caravelle, Renault 4CV, R8, R10, Dauphine Ondine
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane
AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.
Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroen
2CV, with generator propulsion over V-belts. (2CV6 + 2CV4)
Screw, for the securement of the belt pulley, on the crankshaft. Suitable for Citroen 2CV 16 HP
not fitting for 2CV6! Or.Nr. A24195
Ring nut for the wheel bearing largely, suitable for Citroen AK, ACDY, AMI 6+8, AZAM 6. The ring
nut does not fit for a normal Citroen 2CV! Measurement: M78 x 1,5. Tightening torque: 343-392Nm.
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were
e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber sleeve and color
markings! Optically like original! Made in Germany.
1736 Articles | Page 25 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
