for Citroën 2CV AMI6-8
1728 Articles | Page 15 of 35
Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +
800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.
Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.
PDF FILE Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.
Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)
operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.
Cap nut M5, securement for the knob from hard plastic, for the headlight vertical adjustment
Suitable for Citroen 2CV to 9/1968. Or.Nr. 4816-S
Brake hose seal + hydraulic line seal (socket) green. For LHM (hydraulic fluid green), 4,5mm line
(connector 9mm). Suitable for Citroen DS, HY with hydraulics, GS, CX etc.
Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line
(connector 9mm). Very good reproduction. Suitable for Citroen DS, HY with hydraulic, GS, CX etc.
Hydraulic line and Brake line flaring tool for use at the vehicle! For all lines with 3,5mm, 4,5mm
6,35mm (1/4 "). (Citroen)
Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all
flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.
Brake line flaring tool, for brake and hydraulic lines. Particularly for Citroen connectors. With
thrust pieces for 3,5mm + 4,5mm lines (8,0mm + 9,0mm Clinch screws).
Hydraulic hose rubber 4.5 mm LHS (red) + normal brake fluid DOT3 + DOT4. Top quality (new improved
reproduction made from EPDM). Suitable for Citroen DS with LHS hydraulic system, Citroen HY + 2CV, AMI with 4.5 mm brake line (9 mm screw connection).
Interior light for Citroen AMI8, ACDY, Dyane. Citroen HY. Note: A lot of different lamps were
obstructed, please compare the pictures. Or. No. AM 545-03C
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end
of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Inspection kit for Citroen 2CV6. Consisting of: 1x oil filter + seal, 1x V-belt, 2x valve cover
gasket, 1x air cleaner element, 1x set of ignition cables silicone, 1x condenser, 1x ignition contact, 2x spark plug.
Instrument fixture (made of metal) for 1 additional instrument with 52mm diameter. Universal
fitting. Made in Germany.
Instrument fixture (made of metal) for 2 additional instruments with 52mm diameter. Universal
fitting. Made in Germany.
Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable
harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citroën 2CV, DS, ID, HY, 11CV, all classic Renault and Peugeot models.
Under cover made of sturdy cotton fabric, for 2 seats in the front! The jute cover has been
replaced by a sturdy cotton fabric. You sit a little tighter and the bottom cover does not tear so quickly. The set is suitable for 2 front seats!!! Made in Germany
Jute underlay cover with iron wire sides, for 1 rear seat bench AMI6 (the cover is fitted under the
seat and backrest). Suitable for Citroën AMI6.
Jute underlay cover with iron wire sides, for 2 front seats AMI6 (the cover is fitted under the
seat and backrest). Suitable for Citroën AMI6.
Cable harness seal for the engine front wall. Material: Foam rubber. Diameter: about 45mm. Suitable
for Citroen DS + Citroen 2CV, HY.
Cable binder from rubber. Length: 12 x 160mm. Made in Germany. Now manufactured from improved
material (NBR/SBR fabric rubber)
Cable binder from rubber, length 155mm. Wide 35mm! For main cable harnesses to 30mm diameter. Now
manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 270mm, breadth:12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie made of rubber, for 2CV/DS, like the original. Length: 320mm, breadth: 12mm. Made in
Germany. Now manufactured from improved material (NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
1728 Articles | Page 15 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
