for Citroën HY

HTX Prestige - Developed for classic cars built between the 1900s and 1950s. 5 Liter tin can. ELF

HTX Prestige is for classics from a bygone automotive era. HTX Prestige mineral engine lubricant has a high viscosity to ensure minimal oil loss and Multigrade technology to avoid low-temperature oil circulation issues. The oil is available at SAE 40 grade for vehicles built between 1900 and 1950 without an oil filter or cyclone separator (Citroen 11CV...........) Used oil should be chucked and recycled according to official prescriptions. Please bring used oil to collecting points for used oil recycling.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Label engine oil "TOTAL". Dimension: 32 x 65mm.

Engine tunnel lining, suitable for Citroen HY. Vinyl brown.

Engine tunnel lining, suitable for Citroen HY. Vinyl black.

Engine tunnel lining, suitable for Citroen HY. Leather brown.

Engine tunnel lining, suitable for Citroen HY. Leather black.

Multimeter digital. Dimension: 74x145x40mm. Measuring range: Volt direct current + alternating

current. Ampere, resistance, continuity tester. Everything what you need, for car electrical connection.

Nut (toggle), for the securement of the elbow. Suitable for Citroen 11CV with Perfo + D-Engine

Citroen HY, to year of construction 1963. Or. Nr.451331

Nut for the handwheel of the headlight adjustment and the Ventilation shutter. Suitable for Citroen

2CV. Heater adjustment for Citroen HY + DS19

Nut, for the connector Tripodes aluminum casing. Suitable for Citroen DS + Citroen HY. Per piece

Dimension: M12 x 1,25 (collar unit). Or. No. ZC9615032U

Sewing thread for outdoor use, for soft tops and sunroofs. 100% polyester continuous filament

Length: 3000 metres. Strength: 40. UV resistant, high tensile strength + low stretch, high abrasion resistance, washable and resistant to chemicals. Recommended needle size: 120-140.

Fog tail light, Hella. The is made from black plastic. Universal fitting. Width: 125mm. Height

84mm.

Rivet for the brake shoe. Universal suitable e.g. for 11CV / 15CV / HY / 203 / 403 / Fregate etc

For Citroen 11CV/15CV, you require 92 pieces. Dimension: 4mm diameter. Shaft length 8mm.

License plate fixture Citroen HY Pick UP. Also universal usable. E.G. Peugeot 203 Pick UP.

License plate fixture Citroen HY Pick UP. Also universal usable. E.G. Peugeot 203 Pick UP. For

license plate measurement: 200 x 330mm

O-Ring Assortment, 386 pcs. 32 sizes R-01 - R-32, inner-ø 3-44 mm, oil-, petrol- and

acid-resistant. Made in Germany.

• Suitable for this article
• 
  Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën
  8,83 €

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm (interior

square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6. Or. No. 0311.07 + 0311.04

• Suitable for this article
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw thread repair set for the following threads: M10x1.5, M12x1.5, M14x1.5, M16x1.5. 64

pieces. Scope of delivery: 4x tap drill, 5x plug screw for each thread size, 10x sealing ring for each thread size.

Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm

(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6

• Suitable for this article
• 
  Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203
  0,55 €

Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil

drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.

• Suitable for this article
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil draining pump 12 Volt. Ideal for emptying the hydraulic tank. For example Citroen DS, CX, GS

etc.. Of course other huiles oils can also be pumped with it. Super practical.

Oil wiper ring, 78mm bore. 4mm thickness. Suitable for Citroen 11CV + HY. Citroen DS, to year of

construction 1965. Or. No. D111-11A

• Suitable for this article

Oil absorbent pad. Extremely absorbent. Dimension: 51x38cm. For oils and brake fluids. Attention

the pads do not suck and absorb water! Your wife will be grateful!

Oil pressure switch (Diesel). Thread M18 x 1,5. Suitable for Peugeot 204D, 304D, 305D, 404D, 504D

505D, 604D. Citroen HY Diesel. Renault Diesel: R9, R11, R18, R20, R25, R30. Talbot Tagora Diesel. Response pressure: 0,8 bar. Or. No. 1131.10 . Due to the design, there is always a drop of oil at the electrical connection. Alternatively, the modern oil pressure switch 70733 can be installed.

• Suitable for this article
• 
  Oil pressure switch Peugeot. Suitable for Peugeot 104. 203, 204, 304, 305, 403
  12,79 €

Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil

filters! Thread: M14x1,5.

Oil pressure switch. Thread: M14 x 1,5. Response pressure: 0,5 bar. Suitable for Renault R3 + R4

(747cc), from year of construction 1962 to 1967. Renault Dauphine + Floride. Citroen HY petrol.

Oil pressure valve spring with sleeve, suitable for Citroen 11CV starting from 1954, Citroen DS

first models, HY. The sleeve has 12mm outside diameter and is 20mm long. The spring is 8,5mm x 70mm. Consisting of Or.Nr. DS222-5 + 457381

Cap on the valve cap, for filling in engine oil. The cap is supplied with seal + holding rope

Suitable for Citroen DS + Citroen HY.

• Suitable for this article
• 
  Sealing rubber, for the oil filler neck cap. Suitable for Citroen DS, 11CV, HY.
  10,81 €

Sealing rubber, for the oil filler neck cap. Suitable for Citroen DS, 11CV, HY.

• Suitable for this article
• 
  Cap on the valve cap, for filling in engine oil. The cap is supplied with seal
  39,57 €

Oil-fill in cap, chromium-plates. Suitable for Citroen 11CV D engine. Citroen HY + Citroen DS19.

Rubber cap oil exhausting suitable for the valve cap (crank house exhausting), for Citroen HY + DS

early years of construction. Or. No. DS132-48

Oil exhausting rubber cap, for the valve cap. Suitable for Citroen DS, HY, CX. Inside diameter

40mm. Inside diameter crank house exhausting: 7,0mm.

Oil filter (like Purflux L126). Suitable for Peugeot 403 Diesel. Peugeot 404 Diesel, to year of

construction 09/1969. Citroen HY Diesel. Or. No. 1109.05

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  55,43 €

Oil filter LS127. Suitable for Peugeot Diesel + Citroen HY Diesel. Peugeot 204D, starting from year

of construction 10/1969. 304D, 403D, 404D starting from year of construction 10/1969, 504 D. Thread: M18x1,5. Or. No. 1109.35

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  55,43 €

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Oil can with pump, made of sheet metal, blue painted, optic like in former times, 125 ccm content,

Oil pump seal. Suitable for Citroen ID19. Citroen 11CV + 15CV. Citroen HY. Or. No. 457220

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Screw M7x20, galvanized
  0,55 €

Oil pump repair set. Suitable for Citroen 11D. Citroen HY, to year of construction 1963. Citroen DS

ID, to year of construction 03/1963. Dimension: 24.9 x 30mm. Or. No. 457373 + 457374

Oil pump repair set. Suitable for Citroen HY, starting from year of construction 1963. Both drive

wheels have 10 teeth. Or. No. ZC9457373U + ZC9457374U.

Oil pump grain sieve down. Suitable for Citroen HY, 11CV + 15CV. Dimension: 150 x 10,5mm. Or. No

452719

Oil pan sealing set. Suitable for Citroen 11CV D engine + Citroen HY. Or. No. D113-97

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil pan rubber seal (2 fittings), seal to the crankshaft. Suitable for Citroen 11CV D engine, ID19

DS19, HY. Or.Nr. D113-11 + D113-12. Made in Germany.

• Suitable for this article
• 
  HYLOMAR engine sealing material, permanent elastic engine sealing
  18,74 €
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil pan seal Peugeot Diesel. For the following engines: XD2, XD4.88, XD4.90, XD2S, XD3, XD3TE

XDP88, XDP90, CD2P94. Suitable for Peugeot 404, 504, 505, 604, J7, J9. Citroen HY Diesel. Or. No. 0313.23

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil pan seal, suitable for Citroen 11CV D + Citroen HY. Or. No. D132-9. Original one of "Glaser".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil change card "Der Franzose". With inspection list. Language: German, English, French! Per piece!