for Peugeot 404

Oil filter LS498C. Suitable for Peugeot 204 (starting from year of construction 10/1975), 304, 205

305. Citroen BX, C15, LN, Visa (10-11-14). Connecting thread: 3/4 x 16. Overall height: about 92mm.

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  52,46 €

Oil filter, for Peugeot 204, of year of construction 10/1970 to 09/1975. Peugeot 304, Peugeot 404

starting from year of construction 1968, 504, J5, Citroen C25. Connecting thread: M18 x 1,5mm.

• Suitable for this article
• 
  Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol
  52,46 €

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots

(Citroen 2CV)

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Oil can with pump, made of sheet metal, blue painted, optic like in former times, 125 ccm content,

Oil pan seal Peugeot Diesel. For the following engines: XD2, XD4.88, XD4.90, XD2S, XD3, XD3TE

XDP88, XDP90, CD2P94. Suitable for Peugeot 404, 504, 505, 604, J7, J9. Citroen HY Diesel. Or. No. 0313.23

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

Oil pan seal. Suitable for Peugeot 404 + J7. Engine: XC6, XB5, XC5P, XB5P. Or. No. 0304.03

Oil change card "Der Franzose". With inspection list. Language: German, English, French! Per piece!

Oil change cards (10 fittings) "Der Franzose". With inspection list. Language: German, English

French!

Aluminum sealing ring range. 300 sealing rings, from 9x1 to 28x26. Optimally for brake and engine.

• Suitable for this article
• 
  Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën
  8,83 €

Copper sealing ring range. 150 fittings.

P 202/203/403/404, wheel brake cylinder rear. Piston diameter: 25,4mm (1 inch). Suitable for

Peugeot 202, 202, 403, 404. Simca Aronde + Renault Fregate. Brake line connector: 7/16x20 UNF (funnel port = F flange). Mounting board bore: 36mm. Length over everything: 67mm. Or. No. 4402.08 + 4402.09. Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.30

oversize. Diameter crankshaft: 44,675 to 44,691mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.15

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension: 0.50

oversize. Diameter crankshaft: 44,475 to 44,491mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.16

Connecting rod bearing (complete set) for fuel engines with 3 crankshaft bearings. Dimension

Standard dimension. Diameter crankshaft: 44,975 to 44,991mm. Wide one: 27mm. Suitable for Peugeot 203 (all engines). Peugeot 403 (all petrols). Peugeot 404 first serie (8CV), engine XC + XB2 (404 U6). Or. No. 0606.14 + 0606.01.

P 203/403/404, clutch release sleeve such as original (with graphite coil). Suitable for Peugeot of

203. 403 + 404 with C3 gearbox. Diameter graphitic coil: 60mm. Inside diameter graphitic coil: 35mm. Total width: 96mm. The clutch release sleeve is supplied in a strengthened version. Or. No. 2041.11. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.

• Suitable for this article
• 
  P 403/404, release bearing fixing clip (long version). Suitable for all Peugeot
  5,21 €
• 
  P 403/404, release bearing fixing clip (short version). Suitable for all
  2,29 €

stoplight switch in brake master cylinder, Peugeot 203, 403, 404. thread 1/2x20, UNF/

• Suitable for this article
• 
  Brake hose copper sealing ring. Dimension: 13 x 19 x 1,5mm. Peugeot Or. No
  0,64 €
• 
  Brake hose copper sealing ring. Dimension: 15 x 20 x 1,5mm. Peugeot Or. No
  0,71 €

P 203/403/404, seals (6 item) for the SEV wiper axles. For diameters: 5,0mm. Screwed joint: 7,9mm

Suitable for Peugeot 203, Peugeot 403, Peugeot 404

P 203/403/404, seals (6 item) for the SEV wiper axles. For diameters: 6,0mm. Screwed joint: 8,9mm

Suitable for Peugeot 203, Peugeot 403, Peugeot 404

P 203/403/404, bearing bolt oil pump, suitable for Peugeot 203, 403, 404 (only 404 with 3x

crankshaft bearings). Or. No. 1035.03

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 20

UNF. Or. No. 4402.10. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, to 2757587 + 2819484. Peugeot 403 rear on the right, starting from 2757588, 2819485 (with that 403 the mounting of the brake line was changed). Peugeot 404 rear on the right.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 24

UNF. Or. No. 4402.11. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, starting from 2757588, 2819485. Peugeot 403 rear on the right, starting from 2757587, 2819484 (with that 403 the mounting of the brake line was changed). Peugeot 404 at the rear left.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, wheel brake cylinder in front. 1 piston, diameter 1 1/4 inch. (31,75mm). Without

t vent screw. Mounting board bore 22mm, brake line connector 11mm,7/16x20 UNF, length over all 63,5mm. Made in France

• Suitable for this article
• 
  Flange screw 7/16x20UNF for 6,5mm line. Length + wide ones over everything: 12
  2,77 €
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 203/403/404, camshaft drive chain, 64 chain links (duplex, double chain). Suitable for Peugeot

203, 403 + 404. Or. No. 0816.06

P 203/403/404/504, brake shoe mounting kit for servo brake (Mastervac) at rear. Suitable for

Peugeot 203, 403, 404, 504. For saloon, coupé and convertible. Consisting of: 2x 4375.16, 2x 4308.06, 4x 4312.06, 4x 4315.08, 2x 5363.01. Total length of springs: 132.5mm + 65mm.

P 203/403/404/504, grease cap out of sheet metal. Diameter: 66mmm. Suitable for Peugeot 203, 403

404, 504 (to year of construction 1976). Or. No. 3740.07

P 203/403/404/504, oil restraint coil, rear axle tube on the right. Suitable for Peugeot 203, 404

404 + 504. Outside diameter: 61,12mm. Inside diameter: 40,2mm. Marking: white. Or. No. 3045.17

P 203/403/404/504, wheel bearing shaft seal in front. Suitable for Peugeot 203, 403, 404, 504

Dimension: 42 x 62 x 10mm. Or. No. 3724.08

P 203/403/404/504, shaft seal for the bearing of the full-floating axle. Dimension: 52 x 75 x 12mm

Suitable for Peugeot 203, 403, 404, 504. Or. No. 3345.09

P 204, Rear brake hose. Fits Peugeot 204, probably up to 1966. Length: 287mm. Thread inside: 3/8 x

24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts with thread offset at the bottom! From approx. year of manufacture 1966 onwards, the flare screws have been replaced by a full thread! Or. No. 4816.09. Made in Europe.

P 204/304, repair set for the steering gear (24mm gear rack). Suitable for Peugeot 204 + 304, to

year of construction 1977.

brake blocks front, Peugeot 204 all, system Bendix, 304 03/72>07/77 404 >05/68

P 204/304/404, brake caliper on the right. System Bendix (2 pistons, 48mm diameter). Suitable for

Peugeot 204, 304 + 404. In the exchange, plus 50 Euro Old part deposit. Or. No. 4400.28

• Suitable for this article
• 
  brake blocks front, Peugeot 204 all, system Bendix, 304 03/72>07/77 404 >05/68
  23,75 €

P 204/304/404, master brake cylinder, single circuit brake system, 19mm piston diameter. Suitable

for all models to year of construction 1977, which have in front disc brake + rear drum brake. Without connection for stop light switche. Brake line connector 3/8 " 24UNF. The connections are vertical to the flange connection. The flange has 7,5mm bore diameter. 50mm bore distance in the flange. Made in Europe.

• Suitable for this article
• 
  Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for
  16,76 €
• 
  Brake fluid reservoir with locking cap, for the brake system LHM. Suitable for
  19,73 €

P 204/304/404, piston for brake caliper. Brake system Bendix. Diameter: 48mm. Suitable for Peugeot

204, 304, 404. Per piece.

P 204/304/404, needle bearing spring-and-damper unit above (dome bearings). Outside diameter: 85mm

Inside diameter: 60,1mm. Heavy one: 3,6mm. Suitable for Peugeot 204, 304 + 404. Or. Nr. 5035.05

P 204/304/404, wheel brake cylinder rear (on the left + on the right are identically). Suitable for

Peugeot 204, 304, 404. For Thermostable brake (brake booster). Simca 1000, starting from year of construction 1967. System Bendix. Piston diameter: 19,0mm. Or. No. 4402.21. Mounting board bore: 36 mm. Brake pipe connection: 3/8 x 24 UNF. Length over everything: 68 mm. Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

wheel brake cylinder rear, Peugeot 204, 304, 404 Thermostable system Bendix, piston 19mm, fits left

t + right / original equipment 440221 till identification number: 3298000. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

Wheel brake cylinder, rear, for Peugeot 304,404 Cabrio and Coupe, suitable for left and right side

e, piston: 15/16 inch (23,81 mm) Bendix Nr. 621672 Peugeot Nr. 440237. Made in Europe.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 6,5mm highly!

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

58mm, ball diameter 22mm - 14mm highly. The synthetic half shell (nylon) is 8mm highly!

P 204/304/404, tie rod end repair set. Suitable for Peugeot 204, 304 + 404. Thread M10, length

62mm, ball diameter 22mm - 16mm highly.

P 204/304/404/202, front brake hose. Fits Peugeot 204 + 304, from probably 1966 to 1969. Length

376mm. Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts through thread! Up to approx. year of manufacture 1966 the flare screws have a thread offet at the bottom! Made in Europe.

P 204/304/404/504, flexible disk steering column. Suitable for Peugeot 204, 304, 404, 504. Pitch

h diameter: about 50mm. Or. No. 4040.14

P 204/304/404/504, rear axle rubber stop. Diameter: 55mm. Height: 53mm. Suitable for Peugeot 204

304, 404, 504. Or. No. 3514.12

P 204/304/404/504, gear knob for steering wheel gear change. Please note: this is the rubberised

version (not Bakalit). Suitable for all Peugeot 204, 304, 404, 504 with steering wheel gear change! Or. No. 2401.16

P 204/304/404/Simca, wheel brake cylinder at the rear left. Suitable for Peugeot 204, 304, 404

Simca 1300, 1301. Piston diameter: 17,46mmmm (11/16 customs). Brake pipe connection: 3/8 x 24UNF. Or. No. 4402.19. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 204/304/404/Simca, wheel brake cylinder at the rear right. Suitable for Peugeot 204, 304, 404

Simca 1300, 1301. Piston diameter: 17,46mmmm (11/16 customs). Brake pipe connection: 3/8 x 24UNF. Or. No. 4402.20. Made in France

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,31 €

P 204/304/504/505/604, shaft seal wheel bearing (exterior). Outside diameter: 70mm. Inside

diameter: 55mm. Height: 10mm. Suitable for Peugeot 204, 304, 504, 505, 604. Or. No. 3346.06

P 204/304/Talbot, brake pads in front, brake system Lucas/Girling. Suitable for Peugeot 204 + 304

starting from year of construction 08/1966. Talbot 1200/2 series. Without connections for brake wear control. Wide one: 63,4mm. Height: 55,0mm. Heavy one: 14,5mm.