for Renault AMI6-8

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV, DS, HY, 11CV

Measurements: 43 x 78mm.

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV. 46x90mm

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Console for a radio in DIN measurements. The console is mounted under the dashboard. Uinversal

fitting, e.g. Citroen 2CV, DS. Dimension cutout for radio: 182 x 53mm. Dimension outside: Height: 76mm. Wide above 250mm (down 220mm). Deep one: 175mm.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Vacuum diaphragm, pulldown, for the Choke (cold engine starting). Suitable for Citroen 2CV6. The

diaphragm is mounted at the carburetor above. Or. No.: 95568478

• Suitable for this article
• 
  Seal under accelerator pump 2CV6. (2CV with oval carburetor). Made in Germany.
  1,96 €

Protection plate made of metal, for the fuel tank, suitable for Citroen 2CV + Mehari. The

protection plate is a very good reproduction of the original protection plate, which there was as option. Only suitable for the original chassis! Or. No. AY72171. Made in Germany.

Protection plate for the engine, for the original chassis. Suitable for Citroen 2CV, AK400, Mehari

This extremely heavy sheet metal is an accurate reproduction of the original protection plate, which was offered by Citroen. Made in Germany.

Chock block from wood. Like original. Suitable for Citroen 2CV

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027

• Suitable for this article
• 
  Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026
  10,81 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026

• Suitable for this article
• 
  Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027
  12,79 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Valve Ami8 SUPER/all GS, inlet, apart from X models. Diameter: 39mm, length: 97,3mm, shank: 8mm

Valve Ami8 Super/GS, exhaust, with 1129ccm/1222ccm, not X models. Diameter: 34mm, length: 96,2mm

shank: 8,5mm.

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is

tightened frequently too strongly, and licks then oil.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

2CV starting from 1971, stud bolt M7x76mm, for the mounting the valve cap on the cylinder head

Suitable for Citroen 2CV starting from year of construction 1971.

2CV until 1971, stud bolt M7x83,5mm, for the mounting the valve cap on the cylinder head! Suitable

for Citroen 2CV to year of construction 1971.

Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material cork.

Valve cover gasket for Citroen 2CV old. Material rubber. For vehicles, which have the valve cap

from aluminum casting.

Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made in

Germany.

• Suitable for this article
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from

silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside

diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A

Valve spring, for inlet and exhaust. Per piece. For 2CV with only 1 valve spring (to year of

construction 1954). Starting from 1955 this spring are monted together with a smaller spring. Suitable for Citroen 2CV. Outside diameter: 32,5mm. Height: 40mm. Or. No. A124-9

Exhaust valve guide for Citroen 2CV6. Length: 42mm, internal diameter: 8.5mm. Top collar (external

diameter): 10.5/12.5mm

Valve guide inlet for 2CV-AZAM, Ami6, Ami 8 Installed one starting from 1968. 8,00mm inside

diameter, 12,55mm outside diameter, 47,00mm long.

• Suitable for this article

Valve guide inlet for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,50mm inside diameter, 12,55mm

outside diameter, 45mm long.

• Suitable for this article
• 
  Valve guide exhaust for 2CV-AZAM, AZU. Installed from 1968 to 1972. 8,00mm
  15,77 €

Valve guide inlet valve for Citroen 2CV6. Length: 47mm, outside diameter 12,5mm, inside diameter

8,00mm, fit above 10,5/11mm.

valve guide inlet valve Ami8 Super, Citroen GS. length 55,5mm, Inside 8mm, outside 12,55mm

Valve caps for the tire. With Citroen Logo. Set = 4 fittings!

Valve stem seal, exhaust, for Citroen AMi6, 2CV4. Inner diameter 7,5 - 8,0 mm. Inner diameter at

bottom: 10.5 mm.

Valve stem seal inlet, for AMI6, 2CV4. Inside diameter 7,8mm, outside diameter 9,9mm-13,2mm

strength 10mm. Per piece!

Valve stem seals, set (4 fittings), for Citroen 2CV6. Original Glaser. Inside diameter: 7,9 + 7,4mm.

Ventil stem sealing, suitable Citroen GS, GSA, Ami8 SUPER. All models, all engines. Complete set

for inlet and exhaust. Dimension: Outside diameter: 13mm. Height: 10mm.

First aid kit Compact, according to DIN 13164. Length: 215mm. Wide one: 55mm. Amount: 130mm

Original LEINA!

Carburetor sealing set (only seals), inclusive Seal under carburetor, for oval carburetor SOLEX

26/28/35 CSIC, SCIC. Suitable for Citroen 2CV starting from year of construction 1981, Dyane, AMI. Made in Germany.

• Suitable for this article
• 
  Gasoline filter universal, from plastic. Universal fitting, e.g. for 2CV, DS
  2,87 €
• 
  Float needle valve small, suitable for Citroen 2CV6 with oval carburetor. For
  6,84 €
• 
  Float needle valve big, suitable for Citroen 2CV6 with oval carburetor. For
  6,89 €
• 
  Carburetor setting gauge. For the height adjustmenting from the carburetor
  9,87 €
• 
  Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm
  1,04 €
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Carburetor sealing set for Citroen 2CV4 + 2CV6. Dyane 4 + Dyane 6, AZU250, AKS, Mehari. Round

carburetor Solex 34 PICS 4-5-6-10.

• Suitable for this article
• 
  Gasoline filter universal, from plastic. Universal fitting, e.g. for 2CV, DS
  2,87 €
• 
  Float needle valve for Citroen 2CV6, for Solex carburetor 34. Nozzle size: 130
  9,82 €
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

Carburetor sealing set for Citroen Ami 6, Dyane. Renault Dauphine, R4, R6. Carburetor Solex 34PICS

3.

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €

carburetor seal kit Solex 28CIC Citroen GS Special, X2/ Ami 8 Super

• Suitable for this article
• 
  Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges
  13,78 €
• 
  Carburettor jet cleaning tool. Essential for carburettor maintenance and
  10,81 €