Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
for Renault AMI6-8
1732 Articles | Page 27 of 35
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Disk washing water hand pump, reproduction, 5mm. This pump is mounted in the dashboard. In
addition, the pump is a reproduction of the first version, and can installed into a Citroen 2CV6 and partial in a Renault R4 .
Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Hose air circulation for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Accurate reproduction from synthetic, as the original hoses. Inside diameter 40-42mm, length 235mm.
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Lockcylinder set, suitable for Citroen DS, from year of construction 2/1969 to 1971 + AMI6
Consisting of: 3 x lockcylinder (doors + luggage compartment). 2 keys. The lockcylinders have down a round pin. Diameter: 12mm. Length over everything: 34mm. Or. No. DX861-13B
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISAS. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 20,0mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Rear mud flaps (left + right) with Citroen logo. These mud flaps can be universally installed
(Citroen 2CV, Dyane, Mehari, DS, AMI, etc.). Dimensions approx.: 22 cm wide, 25 cm high. The mud flaps have different mounting holes. This allows the mounting height to be adjusted. The mud flaps are of good quality. The brackets for mounting must be made yourself! (There's always something).
Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citroen
2CV, Dyane, Ami, Mehari.
M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
Citroen 2CV6 + 2CV4, to year of construction 1981.
M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for
r Citroen 2CV6, starting from year of construction 1981.
Screws for the carburetor cap. Suitable for Citroen 2CV with oval carburetor. (6 fittings). The
screws correspond optically to the original screws.
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically
constructed over the total construction period (also for Dyane, AK, AMI, Mehari). They fit for the front axle and for the rear axle. Dimensions: 63.5 x 95 x 17 mm. Or. No. ZC 9620041U
1732 Articles | Page 27 of 35
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
