Striker plate underlay. Special coarse seal, so that the striker plate cannot slip (anti-slide)
Suitable for Citroen DS, to year of construction 1971. Citroen HY, starting from year of construction 1968.
for Renault HY
1690 Articles | Page 27 of 34
Blank key door lock. Suitable for Citroen DS, up to year of construction 1974. Citroen AMI6 + AMI8
Citroen SM, CX 2000, GS, VISA. Peugeot J9. Maserati Bora, Indy 4900 America, Merak. For lock manufacturers: RONIS. Shaft length: 17,3mm. Shaft width: 7,0mm. Please observe the cross section of the key bit.
Screw (countersunk head) M7, aluminum, for the striker plate. Suitable for Citroen DS, up to year
of construction 1971. Citroen HY, starting from year of construction 1968. Or. No. DX861-92. Per piece
Screw (countersunk head) M7, chrom-plated, for the striker plate. Suitable for Citroen DS Pallas
up to year of construction 1971. Citroen HY, starting from year of construction 1968. Or. No. DX861-92A. Per piece
Screw for SEIMA turn signal cap + taillight cap. Suitable for Citroen 2CV. Citroen HY. Citroen DS
BREAK. Or. No. AM544-17B
Screw cross lens head (3,9x16) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for synthetic bases. Per piece.
Cross lens head screw (M4x10) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
Cross lens head screw (M4x12) from high-grade steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
Cover sheets (shielding plates) for the steering gear. Completely for in front + rear. Suitable for
Citroen 11CV BN + HY. Or.Nr. 601980 + 601981
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Swing arm bearing outside. Suitable for Citroen HY. Outside diameter: 100,0mm. Inside diameter
55,0mm. Width : 26,75mm.
Swing arm bearing inside. Suitable for Citroen HY. Outside diameter: 80,0mm. Inside diameter
40,0mm. Width : 24,75mm. Or. No. ZC9620006U
Fly wheel screw. M8 x 24 (1 side flat bolt head). Suitable for Citroen 11CV with perfo engine (to
year of construction 1955). Citroen HY until May 1957. Or. No. 453038
Flywheel screw. M9 x 18mm. Suitable for Citroen 11D, Citroen HY > 06/1962. Citroen DS > 06/1962
Per piece. Or. No. D121-92
Side plate on the left (corrugated sheet), behind the driver's cabin (before the spare wheel flap)
Suitable for Citroen HY. Completely with lower cross-beam. Length: about 92cm. Height: 59cm. Made one in European Union, Top quality! Or. No. H821-97
Side plate on the left, behind the driver's cabin. Suitable for Citroen HY. Length: about 92cm
Height: about 59,0cm. Produced from GRP. (very good reproduction, you can see the spotwelds!)
Side plate complete, in front on the left. Made by "Der Franzose". The sheet metal is a
after-production with all reinforcement, like original. Very high quality. Or. No. H82271
Side plate complete, in front on the right. Made by "Der Franzose". The sheet metal is a
after-production with all reinforcement, like original. Very high quality. Or. No. H82271A
Side flap, from synthetic. Suitable for Citroen HY with long body and Pick UP. Under cross bar is
interiorlateral. HY with short wheel base, do not have this flap. Good reproduction with metal frame and synthetic.
Side flap (panel), made of metal. Suitable for Citroen HY with long body and Pick UP. Under cross
bar is interiorlateral. HY with short wheel base, do not have this flap. Accurate reproduction made of metal.
Side panel long, from GRP (synthetic). Suitable for Citroen HY. Length: 1760mm. High: 470mm
Optically like a sheet metal, with cross-beams (axial), above and down. It can be used for on the left (HY821-84) or on the right (HY821-84A). Expansive shipping cost!
SEV, condenser. Suitable for Citroen DS (with SEV contact cartridge, starting from year of
construction 01/1969), GSA, HY. Peugeot 404, 504 etc.. Renault R4, R5, Fuego etc.. Length: 35,5mm. Diameter: 17,0mm. Brand manufacturer! Made in France.
SEV, ignition contact (large sickle type). Version SEV S403. This contact fits nearly for all
French cars, from the fifties + sixties, which have a SEV distributor. E.G. for Citroen ID-DS (year of construction 7/1954 to 8/1967). Citroen 11CV + HY. Peugeot 403 + 404 (of year of construction 1960 to 1975). Renault Dauphine, Floride, Caravelle, R6, Estafette. Talbot all models, with SEV distributor. Made in France.
SEV, ignition contact SEV, short version. Suitable for Citroen DS, to year of construction 03/1972
Citroen 11CV + HY. Peugeot 404, starting from year of construction 1968. Renault R4, early years of construction. Renault Floride, Dauphine etc. Simca + Talbot, different models. Or. No. DS: DY211217A. Or. No. Peugeot: 592724 + 592726.
SEV, distribution arm for distributor cap 48134. Suitable for Citroen 11CV, HY, DS, Peugeot
Citroen. Inside diameter 14mm. (Mounting at the distributor). Depth of the mounting 8,5mm. Distributor arm length over everything = 50mm.
PDF FILE 
SEV, distribution arm SEV 466. Suitable for Citroen 11CV, starting from year of construction 1942
Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distributor cap: 72182
SEV, distributor rotor SEV. Type S4510. For distributors with contact cassette. Suitable for
Citroen DS + HY. Peugeot 504 GR, SR (from year of construction 1979). Renault R4 GTL (R1128, 2370 2430), R8, R10, R12, Renault R16, R18, Fuego. Matra Bagheera. Or. No. Peugeot: 5937.27 + 5937.07. Renault: 7701020056
SEV, distributor arm. Suitable for Renault R4, Renault rear engine. Peugeot 203, 403, 404. Citroen
DS, Citroen HY. Or.Nr.8556679. Length over everything: 50mm. Height over everything: 25mm. Inside diameter 14mm.
SEV, distributor cap SEV 453. Outside diameter: 58,7mm. Suitable for Citroen 11CV, starting from
year of construction 1942. Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distribution arm: 72183
SEV, distributor cap, firm carbon pins. Distributor diameter: 63,0mm. Suitable for Citroen 11CV
HY, DS, Peugeot, Citroen. The suitable distribution arm has our number 48247. Or. No. DM211-15A + DM211-15B
SEV, distributor cap. Suitable for Citroen HY. Renault Renault Fuego (136) 1,6TS/GTX + 2,0TX/GTX
(1362-63). R18 (134) 1,6Turbo + R18 1.4, to year of construction 08/1982. R8, R10, R12, R16. Peugeot various (505). Peugeot Or. No. 5941.11. Made in France.
1690 Articles | Page 27 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
