Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV
starting from year of construction 11/1971. Or.Nr.: AY4311
suspension, spring struts, suspension cylinder for Sonstige-Citroen Dyane
27 Articles
Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV
starting from year of construction 11/1971.
Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids are
inclusive brass bush and rear sealing ring. Per piece. Or. No. AZ434-96. Made by "Franzose / CiPeRe".
Suspension pot casing of small diameters, produced made of metal. 113-115mm. Suitable for Citroen
2CV. The suspension pot casing is supplied without locking caps.
Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for 2CV starting from
year of construction 06/1972. Very good reproduction from the European Union.
Suspension pot hinged tie bar short. (600mm, for the front axle). Suitable for 2CV starting from
year of construction 06/1972. Reproduction
Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for 2CV starting from year
of construction 06/1972. Very good reproduction from the European Union.
Suspension pot hinged tie bar long. (640mm, for the rear axle). Suitable for 2CV starting from year
of construction 06/1972. Reproduction
Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed starting
from year of construction 11/1971 to 1990). These adjustment eyes are produced completely from high-grade steel (type 304). Additionally they have a small bore, so that they can be lubricated. Top quality and best processing. Produced in Europe! Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.
Hinged tie bar adjustment with eye. Old version (Installed to year of construction 11/1971, fits
however on all 2CV to year of construction 1990). Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.
Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are supplied
without nut`s. Suitable for 2CV (small suspension pot). Reproduction.
Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are supplied
without nut`s. Suitable for 2CV (small suspension pot). Original one and/or own production, the better choice. Or.Nr.: AZU434288A
Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV. Only suitable for
r small suspension pot. (46mm)
Rubber stop at the suspension pot (for small suspension pot). Suitable for all Citroen 2CV
starting from year of construction 1955. Or. No. A435-1b. That is only the rubber, without metal plates!
- Suitable for this article
Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen 2CV4
2CV6. Reproduction, good quality. Made by Franzose/CiPeRe in Europe. We have now had the rubber stop made ourselves, as the quality has deteriorated in recent years. We have only cast the metal plate firmly with the rubber so that the weak point of water (rust) penetrating between the rubber and the metal plate can no longer occur.
Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV
Dyane, AMI, AK, AZU, ACDY.
Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Citroen
2CV. Consisting of: 2x triangle pin largely, 2x triangle pin small, 8x clip, 4x spring hinged tie bar adjustment from high-grade steel. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspension
pot hinged tie bar at the radius arm). Measurement: 45 x 14,29mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin largely, galvanizes. Suitable for Citroen 2CV rear. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 45 x 14mm. Reproduction from South America.
Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12,21mm. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Triangle pin small, galvanizes. Suitable for Citroen 2CV front. (Securement of the suspension pot
hinged tie bar at the radius arm). Measurement: 42 x 12mm. Reproduction from South America.
Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangle
pin largely, 2x triangle pin small, 8x clip. 100% like original spare part. Same material. Rust protection such as original. Surface such as original, no sharp edges. Durability such as original! Better it does not go. Co-operation from Germany and the Netherlands. Or. No. A434-84 + AM434-84A. The triangle pins are produced from sinter metal (like original). The triangle pins must be put before the assembly, for a half hour into warm oil!
Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable
for all Citroen 2CV, AK, Dyane, AZU. (small + large suspension pot) property reproduction, optically like original! Or.Nr.: A434.286.
Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suitable
for all Citroen 2CV, AK, Dyane, AZU. (smaller + large suspension pot). This collar is from a improved rubber silicone mixture and has on the inside small splines, so that it cannot slip from the Threadet pipe. Or. No.: A434.286.
Friction lining in the suspension pot (small suspension pot). Without metal plate. Material
Synthetic. The friction lining is riveted on the metal plate. Suitable for Citroen 2CV.
Ricipot lubricant for the suspension pot (400ml in spray can). Suitable for Citroen 2CV, Dyane
AMI, AK, AZU, Mehari... Ricipot lubricant is supplied with a suitable cavity probe, making it very easy to apply to the suspension pot. It is based on technical castor oil and manufactured according to Citroen specifications at the time of production. Ricipot prevents creaking and squeaking of the suspension pots and prevents the risk of internal rusting of the suspension pots.
27 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
