Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

ignition for Sonstige-Citroen Dyane

49 Articles
Shipping country Shipping country

Electronic ignition system 12 Volt - reproduction! Suitable for Citroen 2CV6. This ignition system

is a reproduction. It is not of the same high quality (both in terms of workmanship and the components used) as our 14300 ignition system, but this reproduction ignition system is still interesting for those who don't drive much. Because it is much better than the normal contact and condenser controlled ignition! It's your decision! However, we ourselves continue to ride with the 14300 ignition system, which has never let us down for over 18 years!

The '123\EVO' replaces the former 123\BLUE and is a further development. ( 123\EVOLUTIF ) It offers

rs many different advance curves, 5 for tuning with regular fuel, 5 for tuning with LPG/ethanol and 5 'standard'-curves as prescribed by Citroen for ALL two cyl.-engines, inclusive VISA-engines. The 123\EVO also offers : vacuum-advance, warm-up-advance, overheat-retard, spark-balancing, dwell-balancing, current-time-out, idle-speed-control.

PDF file available PDF FILE

Electronic ignition system 12 Volt. For Citroen 2CV6. This electronic ignition system is very easy

to install and no longer has any mechanical components that can wear out. There is no need for any maintenance work on the ignition. You will be thrilled! We have already sold more than 10000 systems. And if you want your 2CV to run even better, we recommend our ignition coil 14395. The ignition system is designed for original engines. (A79/1, M28, M28/1 engines).

PDF file available PDF FILE

Ignition coil special kit for 2CV. High-performance ignition coil, special for 2CV. This

hign-performance ignition coil "made by Franzose" is the solution to the well known problem of defective 2 cv ignition coil. No more bucking! No need anymore to have on bord an ignition coil for replacement! This high-performance ignition coil works in combination with electronic ignition (14300) as well as with ignition contacts warranting in both cases a reliable operating. A further advantage of this high-performance ignition coil is a much better start. This high-performance ignition coil has by 10 volts the same output as the normal ignition coil by 14 volts- This enables a much better start. When starting vehicle electrical system voltage decreases till approx.9-10 volts. At this level the high-performance ignition coil is already highly efficient. Because there is no high-resistance oil anymore between the primary wave and the secondary wave and thanks to safe plastic used this high-performance ignition coil has a long life expectancy. Content: mounting bracket, 2x ignition cable, 2x NGK ignition plug. CAUTION:our ignition coil is only compatible with our electronic ignition systems (items n°14300 + 14325). Other electronic ignition systems work with a different resistance what can destroy the ignition coil!

PDF file available PDF FILE

Ignition 123UNI is designed for all STANDARD 2CV, Dyane, AMI engines that were ever produced. The

appropriate advance-curve can be selected with a 16 position rotary-switch, behind an opening in the front of the housing. The unit will work on 6 Volt and on 12 Volt systems. The '123\UNI' is designed to work on '2CV' 9 hp, 375cc, A53, M4, A79/0, M28, A79/1 and M28/1 engines in conjunction with the stock black coil. (6 Volt type for 6 Volt battery, and 12 Volt type for 12 Volt battery) The dwell is automatically adjusted. Upon installation, the user has to check his engine plate ( "A", "AZ", "AM", "AYA", "AM2", "AYA2", "AK2", "A06/635", "A06/642", "AM2A" or "A06/664" ) and look in the manual which setting of the rotary-switch is appropriate. There also is a special setting for M28/1-engines running on LPG or on Ethanol, like 'E85' as used in Sweden. ( 'E85' contains 85 percent ethanol, and 15 percent standard fuel )

PDF file available PDF FILE

Inspection kit for Citroen 2CV6. Consisting of: 1x oil filter + seal, 1x V-belt, 2x valve cover

gasket, 1x air cleaner element, 1x set of ignition cables silicone, 1x condenser, 1x ignition contact, 2x spark plug.

Original ignition cable set, Citroen 2CV from 1979. The cables have the large spark plug connector

(Closure of the engine fan housing). Original equipment quality. The best cables for 2CV! Made in Spain. This cable has a high ohmic resistance. Suitable for our spark plug 14301.

Ignition cable set silicone, suitable for Citroen 2CV6 (2 pieces). Made in Spain! This cable has a

high ohmic resistance. Suitable for our spark plug 14301.

Ignition cable set, installed until 11/1979, for Citroen 2CV. OEM quality! The best cables for 2CV

Made in Spain. This cable has a very low ohmic resistance. Suitable for our spark plug 14394. Basic information about interference suppression: Up to the year of construction 1979, the ignition cables had a low resistance. The same applied to the spark plug. Suppression chokes were installed for the suppression. Today, this can be done immediately by combining high-resistance spark plugs with low-resistance ignition cables.

Spark plug NGK BP6HS. For all Citroen 2CV (6 + 12 volt), Dyanen, Ami 2 cylinders! This is a

non-interference suppressed spark plug (low ohmic resistance). For interference suppression (radio) you need ignition cables with high ohmic resistance.

Spark plug NGK BR7HS for Citroen 2CV6 up to the year of construction 1979 The BR7HS is a suppressed

spark plug (high ohmic resistance). Basic information on interference suppression: Up to the year of construction 1979, the ignition cables had a low resistance. As did the spark plug. Suppression chokes were installed for electrical interference suppression. This can be avoided today by combining high-resistance spark plugs with low-resistance ignition cables.

Spark plug wrench (adjustable in length), for 20,8mm spark plugs. This key is perfect for the

Citroen DS. It can be used with the normal electrode extension. Fitting for 3/8 inch ratchet (medium size). Fits of course also on all other spark plugs, for 21mm tools. Manufacturer: HAZET. Adjustable length from: 137,5mm to 157,5mm and 195,5mm. With spark plug holding rubber.

Ignition coil Citroen 2CV, 12 Volt, reproduction. This optically original ignition coil has an

epoxy (plastic) filling as resistor instead of an oil filling (as resistor between the primary and secondary coil). Some swear by it (and sell it as a performance ignition coil), others prefer the original ignition coil (our 14307, was installed 7 million times in new 2CVs) or our 14395 (this is a real high-performance ignition coil). We ourselves drive all our 2CV's with the 14395 coil!

Ignition coil Citroen 2CV, 12 Volt, original manufacturer. No replica! If the 2CV stutters, the

ignition coil is often to blame!

360° VIEW

Ignition coil bracket left, reproduction. Suitable for Citroen 2CV + Citroen DS with 6 V

technology. Synthetic black.

Ignition coil bracket left, reproduction. Suitable for Citroen 2CV + Citroen DS with 6 V

technology. Synthetic black.

Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs

coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!

49 Articles
Shipping country Shipping country

Citroën 2CV Ignition System and Replacement Parts

The ignition system of all Citroën 2CV engines ever built (as well as those of the Dyane, Mehari, AMi6, and AMi8) is based on the same simple principle. These engines do not have a traditional ignition distributor. A movable cam is mounted at the front end of the camshaft, which opens and closes the ignition contact. This cam is spring-mounted on two weights. As the engine speed increases, centrifugal force causes these weights to change the position of the cam. This ensures a variable ignition timing curve (advanced ignition).

The unique feature is that the ignition contact opens with every engine revolution (in a four-stroke engine, opening the ignition contact is actually only necessary every other revolution). Therefore, the cylinder fires even when no spark is required. This principle is also used in classic Harley-Davidson motorcycles. The spark thus jumps once during the intake stroke.

Spare Parts for the Ignition System

We carry all spare parts for the ignition system, regardless of the model year. However, the quality of the ignition contacts and capacitors has deteriorated significantly. Regular inspection and replacement of the ignition contacts and capacitor are absolutely necessary to ensure the engine runs smoothly. These components are somewhat awkwardly located behind the fan blade, which makes maintenance work relatively time-consuming and expensive. Access is still relatively good on the 2CV, but it is much more complicated on the Dyane, Mehari, and AMI, as the front grilles sometimes have to be removed first.

Advantages of the electronic ignition system

However, there is a great solution: the electronic ignition system. We recommend using an electronic ignition system, as it makes starting the engine considerably easier. It also delivers consistent ignition performance and significantly reduced maintenance requirements compared to conventional ignition systems. The latter are often associated with wear and misalignment of the ignition contact. An electronic ignition system, on the other hand, operates contactlessly, ensuring consistent performance throughout its entire service life.

It also allows for more precise control of the ignition timing. Along with a high-performance ignition coil—which we also recommend—we include new spark plugs and ignition wires. We have already sold over 10,000 ignition systems that work flawlessly. Installation is relatively quick even for beginners, and detailed installation instructions are included. We drive our own 2CV exclusively with the electronic ignition system—and it has never let us down.

The ignition system is microprocessor-controlled and works even with low battery power. The centrifugal weights for the advance ignition and the cam that actuates the ignition contacts are removed. Instead of the centrifugal weights, two small caps with magnets are placed on the mounts, which act as sensors for the Hall effect sensors. This eliminates wear and tear. The ignition timing is also very easy to adjust. The ignition system has a built-in LED for this purpose. All you need is a 6-mm drill bit to find and set the ignition timing on your engine.

So say goodbye to time-consuming maintenance and poor engine starting, especially in wet conditions. Fuel consumption is also slightly reduced by the electronic ignition system. Set it up once and forget about it. Of course, the spark plugs and ignition cables should still be replaced regularly (high-quality versions are available). You’ll also notice the engine revs up more smoothly. The engine also responds better when you change throttle positions. The ignition system replaces the original ignition contact box and is therefore not visible.

Available electronic ignition systems

We carry electronic ignition systems for all 2CV engines ever installed. For the 2CV6 (or other Citroëns with the 602 cc M28 engine), we carry the ignition system under part number 14300. As a more affordable alternative, we also offer a replica ignition system. Of course, you’ll also find 6- and 12-volt ignition systems for the 375 cc, 425 cc, and 435 cc engines.

What exactly is early ignition?

When the piston moves upward in the engine, it compresses the fuel-air mixture that has previously flowed in through the intake valve. Once the piston is at the top, the spark plug must ignite the mixture. This pushes the piston downward, causing it to move again.

In practice, however, it takes a moment for the fuel-air mixture to explode after the spark plug fires (time delay). This would mean that the piston gets hit hard when it is already on its way back down, since the explosion in the cylinder occurs too late. This leads to a significant loss of power.

The spark plug must therefore fire earlier, while the piston is still on its way up. When the piston is at the top, this is called top dead center (TDC). When the piston reaches TDC, the explosion should have its greatest effect. This is why there is an advance ignition adjustment.

In the Citroën 2CV6, the spark plug typically fires 8° before top dead center (TDC) at idle speed. If the engine is now running faster, the ignition timing must be adjusted accordingly, e.g., to 20°, so that the full force of the explosion acts on the piston as it moves downward again. If ignition occurs too early, the explosion may take place while the piston is already on its way up toward TDC.

The result is a loss of power and, eventually, engine damage. This phenomenon is also known as engine knocking. Therefore, it is very important to check the ignition system regularly. It is even better to replace the mechanical ignition timing adjustment with an electronic ignition system.

Summary of the Citroën 2CV’s Ignition System

The ignition system of the Citroën 2CV is legendary for its radical simplicity. Its most distinctive feature is that it operates without a distributor. Here are the three key characteristics:

  • The “wasted spark” principle: On the 2CV, the ignition coil always fires into both cylinders simultaneously.
  • The dual ignition coil: The 2CV’s ignition coil has two high-voltage outputs (one for each spark plug).
  • The location of the breaker contacts: These are mounted directly on the camshaft behind the fan.

A modern replacement is the electronic ignition system, as the mechanical contacts require frequent maintenance and the ignition timing shifts due to wear. This system is completely housed within the engine fan housing behind the fan wheel, making the ignition maintenance-free.