Hub nut rear, 44ties. Suitable for Citroen 2CV, all years of construction. Reproduction, poor
quality. Tightening torque: 343-392Nm.
wheel bearings for Sonstige-Citroen Dyane
16 Articles
Rear axle nut, 44 mm wrench size. Suitable for Citroen 2CV, all years of construction. Tightening
torque: 343-392Nm. Original Citroen! The better choice.
Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red lubricating grease was
particularly developed for high-speed bearings (wheel bearings). Extremely acid-resistant! (Seawaters)
Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating
wheel bearings, cardan joints etc.
Grease cap rear, out of sheet metal. Suitable for all Citroen 2CV + Citroen DS. Cover for the wheel
bearing, rear in the drum.
Grease cap rear, synthetic, for Citroen 2CV + DS. Cover for the wheel bearing, rear in the drum
Caution: ring nuts may have different inside diameters. Maybe the grease cap should be wrapped with insulating tape to get it fixed in the ring nut!
Wheel bearing for Citroen 2CV. The wheel bearings are in front and rear identically constructed
Suitable for all years of construction! Good own reproduction! Dimension: 35 x 72 x 27mm.
Wheel bearing for Citroen 2CV. Original manufacturer "SNR". The wheel bearings are identical at the
front and rear. Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear (Incl. oil seal + grease cap). Original manufacturer "SNR
Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, rear. (inclusive shaft seal + grease cap). Suitable for all
years of construction. Brand manufacturers. Dimension: 35 x 72 x 27mm.
Wheel bearing set for Citroen 2CV, front (incl. oil seals + split pin). Original manufacturer
SNR". Suitable for all years of construction! Manufacturer SNR France! Dimension: 35 x 72 x 27mm. SNR is the former Citroen 2CV original wheel bearing! Very good quality!
Wheel bearing set for Citroen 2CV, in front. (inclusive shaft seals). Suitable for all years of
construction. Brand manufacturers. Dimension: 35 x 72 x 27mm. Good substitute product to SKF bearings.
Combination tool for wheel bearing nut and 44mm rear hub nut. Combination tool. Semi
professionally. Suitable for the wheel bearing nut in front + rear, and the rear hub nut. (Citroen 2CV)
Wheel bearing shaft seal for Citroen 2CV, Ak, ACDY, AMI. The shaft seals are identically
constructed at the front axle and at the rear axle. Youi need 2 shaft seals per wheel bearings at the front axle and 1 shaft seal per bearing at the rear axle. Dimension: 45 x 62 x 8mm. Made in Germany.
Ring nut suitable for the wheel bearing, for 2CV. (Not suitable for AK, ACDY, AMI). Very properly
matching reproduction. Dimension: M74 x 1,5. Tightening torque: 343-392Nm. Made by "Franzose"
16 Articles
Citroën Dyane Wheel Bearings
The wheel bearings on the Citroën Dyane are identical to those on the Citroën 2CV for the Dyane 4 and Dyane 6 models.
Identical components in the Dyane 4 and Dyane 6
In the standard version, the Dyane uses the same bearings as the 2CV sedan.
- Design consistency: The bearings are identical at the front and rear.
- Dimensions: The standard dimensions are 35 x 72 x 27 mm.
- Type: These are double-row angular contact ball bearings.
Special feature of the Citroën Acadiane
There is one important difference with the Acadiane, the van version of the Dyane.
- Reinforced bearings: Due to the higher payload, the Acadiane requires larger bearings measuring 36 x 76 x 29 mm. These are not compatible with the standard Dyane or the standard 2CV.
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
