Indicator - buzzer. 12 V. Fits universal. So you never forget to turn off the switch from the
indicator. Simple assembly: Connection: Parallel from the connection of the flasher relay (for flash control light) to the control light connection.
turn signal and indoor lighting for Sonstige-Citroen Dyane
24 Articles
Indicator completely in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the right.
Indicator completely in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left.
Side indicator on the wing (complete indicator). Exact copy of the original indicator. Used only in
Italy and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504. Outer diameter: 45mm. Overall height: 20mm. 2x fastening 4mm, at a distance of 30mm. Centre hole 15mm.
Side indicator on the wing (only the cap). Exact copy of the original indicator. Used only in Italy
and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504.
Side indicator for the rear side at the front fender. Suitable for Citroen 2CV, Dyane, HY, DS. This
indicator is serial installed in many south European countries (Italy, Spain etc.). Outside diameter inclusive chrome ring: 36,0mm.
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine A 110 on the right. For light manufacturer AXO
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine 110 on the right. For light manufacturers: Seima
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left. For light manufacturer AXO
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine 110 on the left. For light manufacturers: Seima
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
PDF FILE 
Indicator-flash relay round, electromechanical. 12 volts, max. 4x21 watt. 3 poles X/P/L !!! This
flasher relay is electromechanical, not electronic! This makes it insensitive to voltage fluctuations and it still makes real click-click noises (like in the past). Suitable for Citroen 2CV, Dyane, Mehari, AMI, DS, HY. Peugeot + Renault. Power supply symbol (+, X or B). Connection turn signal front + rear = symbol ( C or L ). Connection indicator light dashboard = symbol ( R or P ). This flasher relay is made exclusively for us! Attention: Pay attention to the pin assignment of the relay. Do not simply change the plugs! The plug designation is also printed again on the housing!
VIDEO Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY
Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.
Electric contact for the round indicator or round tail lamp. Only for original old indicators
whose support are made of metal. Citroen 2CV indicator in front. AK-AZU indicator in front + rear. HY indicator in front + rear. DS BREAK rear. Mehari
Interior light for Citroen AMI8, ACDY, Dyane. Citroen HY. Note: A lot of different lamps were
obstructed, please compare the pictures. Or. No. AM 545-03C
Screw cross lens head (3,9x16) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for synthetic bases. Per piece.
Cross lens head screw (M4x10) from stainless steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
Cross lens head screw (M4x12) from high-grade steel, for round indicator + stop light. For Seima +
AXO caps. Only suitable for metal bases. Per piece
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
24 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
