crankshaft-camshaft-piston-flywheel for Alle Alle

4CV, piston + liner (4 item). Suitable for Renault 4CV, 1 series (R1062). Engine: 680.01 + 662/2

engine capacity: 747cc. Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 60,0mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is imperative that the liners are mounted with copper rings at the bottom. Our article number 80183

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the
  9,82 €

4CV, crankshaft thrust washer (axial clearance), 2 oversize 0,10. Suitable for Renault 4CV, until

1957!

4CV, crankshaft thrust washer (axial clearance), standard dimension. Suitable for Renault 4CV

until 1957!

4CV, camshaft drive wheel (Novotex). 4/100 oversize. Suitable for Renault 4CV, of year of

construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

4CV, camshaft drive wheel (Novotex). 6/100 oversize. Suitable for Renault 4CV, of year of

construction 1949 to 1952. 31 teeth. Outside diameter: 97.7 mm. Inside diameter: 18mm.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Dimension: 0,25 undersize.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Dimension: 0,50 undersize.

4CV, Connecting rod bearing (complete set). Suitable for Renault 4CV (1 series, for crankshaft

35mm)). Standard size.

4CV, spur gear (Novotex) of 31 teeth. Suitable for Renault 4CV, of year of construction 1949 to

1952. Inside diameter: 18mm. Outside diameter: 97,7mm.

4CV, cam follower (closed version). Suitable for Renault 4CV

4CV/Dauphine, piston + liner (4 item). Suitable for Renault 4CV (R1062). Engine: 680.01 + 662/2

engine capacity: 747cc (engine block Dauphine). Bore: 54,5mm. Piston pin: 14 x 46mm. Piston rings: 2 + 2 + 3mm. Outside diameter down: 62,5mm. Outside diameter above: 72,77mm. Height totally: 122,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for
  9,82 €

4CV/Dauphine, connecting rod bearing screw. Suitable for Renault 4CV + Dauphine.

4CV/Dauphine, Intermediate gear engine control. Suitable for Renault 4CV + Dauphine

4CV/Dauphine/Floride, spur gear of 31 teeth (Aluminium). Diameter: 98mm. Inside diameter: 20mm

Width of the teeth: 17mm. Suitable for Renault 4CV, starting from year of construction 1952. Renault Dauphine, Floride. Very good reproduction.

4CV/Dauphine/Floride/Juvaquatre, camshafts drive wheel (Novotex). 42 teeth. Outside diameter

132mm. Inside diameter: 24mm. Original from Ferrozell!

4CV/Dauphine/Floride/Juvaquatre. Crankshaft gear wheel (steel). 16 teeth. Inside diameter: 25mm

Outside diameter: 53,5mm. Wide one: 19mm.

R4/4CV, piston ring set (engine 680). Suitable for Renault R4, of year of construction 1963 to

1967. Renault 4CV, Dauphine. Bore: 54,5mm. Heavy one: 2,0mm + 2,0mm + 3,5mm. Set for 4 pistons.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 2,0mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

4CV/R4, piston rings 54,5mm, for 4 pistons. Suitable for Renault 4CV + R4 (early years of

construction). Engine: 680. Engine capacity: 747cc. Piston rings 2,0mm + 2,0mm + 3,5mm + 3,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Alpine A110, piston + liner (4 item). Suitable for Alpine A110. Engine capacity: 1596cc. Bore

77,8mm. Piston pin: 21 x 66,50mm. Piston rings: 1,75 +2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, 1 oversize (0,25). Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 (1100cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1255cc).

Connecting rod bearing set, standard dimension. Suitable for Alpine A110 1300 (1289cc).

Alpine110, R12 Gordini, R17TS, piston + liner (4 pieces). Suitable for Renault alpine one 110, R12

Gordini, R17TS (R1313, R1323). Engine: 807 12/20. Engine capacity: 1564cc. Bore: 77mm. Piston pin: 21 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88,0mm

Piston pin: 23.5 x 72,0mm. Piston rings: 1,5 + 2.0 + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.
  69,32 €

Alpine A310, piston + liner (4 item). Suitable for alpine A310 (4 liners). Engine capacity: 1605cc

Bore: 78,0mm. Piston pin: 22 x 66,25mm. Piston rings: 1,7 5+ 2 + 4,0mm. Outside diameter down: 82,50mm. Outside diameter above: 96,0mm. Height totally: 143,50mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

A310, liner (per piece) Renault Alpine A310 V6. Engine: 112.7.30. Bore: 88mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  A310, piston (per piece). Suitable for Renault Alpine A310 V6. Engine
  217,18 €

Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting from year of

construction 1965. 1 oversize: 3,14 - 3,18mm.

Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting from year of

construction 1965. 2 oversize: 3,19 - 3,22mm.

Axial-thrust bearing set for the crankshaft. Suitable for Citroen DS, starting from year of

construction 1965. Standard measurement: 3,1 > 3,14mm.

Sheet metal for the crankshaft weight. Suitable for Citroen 11CV + 15CV.

Bushing in the flywheel (primary shaft mount). Dimension: 12x16x20mm. Or. No. 6045759 + 7700553174

This self-lubricating brass bushing is used in many Renault R4 (large + small engine), R5, Estafette, 4CV, Dauphine, Caravelle, R8, R10....

Dauphine, piston + liner (4 item). Suitable for Renault Dauphine. Engine: 1093cc. Bore: 60mm

Piston pin diameter: 14mm. Outside diameter down: 62,4mm. Outside diameter above: 72,8mm. Height totally: 121,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Dauphine/4CV, cam follower (hollow version). Suitable for Renault Dauphine + Renault 4CV (you must

used the push rods from the Dauphine. Because, the 4CV has normally closed cam followers). Engine: 750cc + 845cc. Diameter: 19,0mm. Or. No. 7700529305

Liners sealing rings down, made of copper. Diameter: 60,0mm. Suitable for the following Renault

liners. Our. No. 80058 (Renault 4CV, R1062). Per piece.

Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following

Renault liners. Our. No. 80059 (Renault + Dauphine). 80060 (R4, Estafette, Dauphine, Floride). Per piece.

Diesel, liner gasket bottom (4x). Suitable for diesel engine: XD85, TMD85, XD88, XDP88, XD4x88

XD90, XD4x90. For the following vehicles: Peugeot 403, 404, 504, J7. Citroen HY Diesel.

Piston + liner (2 pieces) for Citroen 2CV (9 hp, 375ccm). Citroen AZ. Incl. piston rings. 62mm bore.

Piston + liner (2 pieces) for Citroen 2CV4, (425ccm). Citroen AZL, AZU, Dyane (425cc). Inclusive

piston rings. 66mm bore. Liner fit measurement in the engine block 80 mm . Suitable for 16/18HP + 12 HP (the pistons are curved, this is not original for a 12HP engine). Diameter piston pin: 20,0mm.

• Suitable for this article
• 
  Piston rings for Citroen 2CV4, 66mm bore. (1 set for 2 pistons). Reproduction
  32,63 €

Piston + liners for 2CV4, 435cc, inclusive piston rings + piston pins. Bore: 68,5mm. Piston pin: 20

x 58,3mm. Piston rings: 1,75 + 2.0 + 4,0. Original supplier.

Piston + liner (2 pieces). Suitable for Citroen 2CV6/Club, Charleston, Special. Dyane 6, Ami 6 + 8

Engine capacity: 602ccm. Engine: M28, R6, 627. Compression 8,5:1. Inclusive Piston rings. Piston pin: 20 x 63,5mm. High-quality reproduction from the European Union.

• Suitable for this article
• 
  2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing
  29,66 €

Piston + liner (2 pieces). Suitable for Citroen 2CV6/Club, Charleston, Special. Dyane 6, Ami 6 + 8

Engine capacity: 602ccm. Engine: M28, R6, 627. Compression 9:1 (32HP). Inclusive Piston rings. Piston pin: 20 x 63,5mm. High-quality reproduction from the European Union.

• Suitable for this article
• 
  Piston rings, for 2 pistons, original, 602cc engine as from 1976. Measure: 1,75
  39,57 €
• 
  2CV6, 602ccm, engine gasket set inclusive. Shaft seals and ventil stem sealing
  29,66 €
• 
  Piston rings for Citroen 2CV6 starting from year of construction 1976. (1 set
  29,70 €

Piston + liner (4 fittings), suitable for Citroen DS - ID19, to year of construction 1965. Citroen

HY. Citroen 11CV. Inclusive piston rings. Bore: 78mm. Piston pin: 20,0mm diameter. Curved piston head. Piston rings: 2,5 + 2.5 + 4,5mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  piston ring compressor from 60 up to 125mm, workshop quality (HAZET)
  62,38 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Engine gasket set inclusive cylinder head gasket, suitable for Citroen DS 19 +
  227,98 €

Piston + liner (4 pieces), suitable for Citroen DS 23 (carburetor + injection engines). Engine: DX4

DX5. Inclusive piston rings. Bore: 93,50mm. Piston pin: 25.0 x 81,8mm. Piston rings: 2,0 + 2.0 + 4,0mm. Compression: 8,75:1

• Suitable for this article
• 
  Liners sealing ring down (4 fittings). Suitable for Citroen DS 23. Bore 93,5mm
  7,88 €

Piston + liner (4 pieces), suitable for Citroen DS, to year of construction 1965 (ID19 + DS19)

Citroen HY 1911cc (HY78, HW1600, HZ1000, H78). Citroen 11CV D. Bore: 78mm. Flat piston head. Piston pin: 20.0 x 68mm. Piston rings: 2,5 + 2,5 + 3,0 + 3,5mm

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  piston ring compressor from 60 up to 125mm, workshop quality (HAZET)
  62,38 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €
• 
  Engine gasket set inclusive cylinder head gasket, suitable for Citroen DS 19 +
  227,98 €

Piston + liner (4 item), suitable for Citroen DS19 + DS20. Inclusive piston rings. Bore: 86mm

Piston pin: 25.0 x 74,4mm. Piston rings: 2,0 + 2.0 + 5,0mm. Outside diameter down: 97,0mm. Outside diameter above: 107,0mm. Height totally: 165,0mm.

• Suitable for this article
• 
  piston ring compressor from 60 up to 125mm, workshop quality (HAZET)
  62,38 €
• 
  Engine gasket set inclusive cylinder head gasket, suitable for Citroen DS20
  99,07 €

Piston + liner (4 item), suitable for Citroen DS21, DS21 IE, ID21 IE BREAK, D Super5. Engine: 21N

DX /VX2 /VX 3 Inject. Engine capacity: 2175cc. Bore: 90mm. Piston rings: 2,0mm + 2,0mm + 5,0mm. Piston pin: 25 x 74mm. Outside diameter down: 97mm. Outside diameter above: 107,0mm. Height totally: 165,1mm.

• Suitable for this article
• 
  piston ring compressor from 60 up to 125mm, workshop quality (HAZET)
  62,38 €
• 
  Engine gasket set inclusive cylinder head gasket, suitable for Citroen DS 21
  92,13 €

Piston + liners. Suitable for Citroen 15CV (6 liners). Bore: 78mm. Piston pin: 20 x 68mm. Piston

n rings: 2,5 + 2.5 + 4,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €