Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

tires and rims for Alle Alle

143 Articles | Page 1 of 3
Shipping country Shipping country

Rim 16 inch. Suitable for Citroen HY. These rims do not have TÜV permission, only for vehicles

which are not used in the public traffic. Production in the European Union. The new rim has the measurements of 5,5x16 " (137.7mm x 406,4mm). HY has normally rims with 400mm diameter. This original 400mm rims can`t used with 16 " (406,4mm) (danger to jump off the tire from the rim). On the new 16 " rim the following tires (with hose) can be used: 195/75 R16C 107/105R, load 925 kg for each tire, speed of 170 kmh (suitable hose 12240) or 175/80 R 16 98/96Q, load 710 kg for each tire, speed of 160kmh (hose 12241).

Rim 4,0x13 (reproduction). Suitable for Renault R4 (R112C, 1123, 1128, 210B, 239B). Renault R5, R6

Pitch diameter: 3x130mm. Insertion depth: 28mm. The rim has centrically no hole for the mounting of a wheel cover! Or. No. 7701349069. !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!

Wheel 4Jx15 for 2CV (tubeless), original size. Attention: The production of these rims has been

discontinued by Citroen. However, the rims are being reproduced close-to-series. The rims are 100% close-to-series in terms of material, all dimensions and the surface coating and correspond to the original equipment standard. We are often asked what a close-to-series rim is. This means that the rim is manufactured by the same factory, on the same machine and with the same materials as the original Citroen rim. The only difference is that Citroen is not the customer. The rim is therefore also approved by the Federal Motor Transport Authority. The wheel basically consists of a rim and a disc. The rim is made from strips that are butt-welded together. The so-called bandage then goes into the rolling operation (normally 2 rolling operations). The disc is then pressed into the rim in the appropriate position. This is known as the press fit. This serves as a fixation for the subsequent welding operation, which is carried out by spot welding. Finally, the entire wheel is coated with a cathodic dip coating to protect it against corrosion and the front is primed in greyish beige. KTL itself is the rust protection. The grey-beige primer is not a final coat. For an optimum appearance, the rims should be painted again. With the reproduction rims known to us, the disc is not pressed in, but only inserted and then welded. (weld seams). These rims therefore have no so-called press fit. But the press fit is what gives the entire wheel its strength. As it is extremely expensive to remanufacture a wheel with a press fit, savings are made on this. That's why our rims are a little more expensive, but your safety should be worth it. Because only the wheel with the tyre makes contact with the road. The rim is for tubeless use, but you can also ride it with a tube!

360° VIEW

Rim Alpine Design. Size: 5.0 x 13. Offset: 24. Bolt circle: 3 x 130. This rim in Alpine Design

silver front and rim base, fits front and rear axle. Hub cap is included. Body modifications not necessary. The rim comes with parts approval for Renault R4, R6 and all R5 models. Tyre recommendation: 155/70-13. On the Renault R4 with Girling caliper, it is essential to ensure clearance to the rim (or convert to Bendix). !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!

PDF file available PDF FILE

Wheel rim Alpine Design. Size: 5.5 x 13. Insertion depth: 25. Pitch diameter: 3 x 130. This wheel

rim in Alpine Design, black with gloss-rotated front and rim well, fits on front and rear axle. Hub cap are provided. Body modifications not necessarily. The wheel rim is supplied with TÜV papers for Renault R4, R6 and all R5. Tire recommendation: 155/70 13. By Renault R4 with Girling brake caliper, must be absolutely respected the free movement to the rim (or converted to Bendix caliper) !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!

PDF file available PDF FILE

Wheel rim Minilite Design. Size: 5.5 x 13. Pitch diameter: 3 x 130. This wheel rim in Minilite

Design, fits on front and rear axle. Hub cap are provided. Body modifications not necessarily. The wheel rim is supplied with TÜV papers for Renault R4, R6 and all R5. Tire recommendation: 155/70 13. By Renault R4 with Girling brake caliper, must be absolutely respected the free movement to the rim (or converted to Bendix caliper). !! Attention - Note for the workshop: The rim is clamped over the wheel studs for balancing! The rims do not have a centre hole centring!

Rim reproduction, with ECE approval (tubeless). Suitable for Citroen DS. Size: 15 x 5.5 inch. ET

40mm. 5 hole securement. Centerhole: angular. Permission: ECE R124. Color: AC 140. Made in Europe. Fits only with original drive shaft!

PDF file available PDF FILE

Rim, size: 6.0 x 15. Insertion depth: 19. Pitch diameter: 4 x 108. Center in the middle (centring)

65,1mm (for original center cap 5421,89). Suitable for Peugeot 205 GTI (1,9). The wheel screwed joints (pin holes) have a 60° taper coil. The rim are supplied with german TÜV papers.

360° VIEW

Box nut suitable for the securement of the wheel cover, for Citroen 2CV, Peugeot 204 + 304. The box

nut is pressed from the rear into the rim! Thread M10.

143 Articles | Page 1 of 3
Shipping country Shipping country