Indicator completely in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left.
for Citroën 2CV ACDY
1677 Articles | Page 7 of 34
Side indicator on the wing (complete indicator). Exact copy of the original indicator. Used only in
Italy and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504. Outer diameter: 45mm. Overall height: 20mm. 2x fastening 4mm, at a distance of 30mm. Centre hole 15mm.
Side indicator on the wing (only the cap). Exact copy of the original indicator. Used only in Italy
and partly in Spain. These indicator were used on the Citroen 2CV, Mehari and DS. Partly also on Renault R4 and Peugeot 504.
Side indicator for the rear side at the front fender. Suitable for Citroen 2CV, Dyane, HY, DS. This
indicator is serial installed in many south European countries (Italy, Spain etc.). Outside diameter inclusive chrome ring: 36,0mm.
Front left indicator cap seal. Suitable for Citroen Dyane, ACDY. Renault Alpine A110 right. This
seal is fitted between the indicator cap and the indicator base.
Front right indicator cap seal. Suitable for Citroen Dyane, ACDY. Renault Alpine A110 left. This
seal is fitted between the indicator cap and the indicator base.
Turn signal cap angularly, yellow. Suitable for Citroen 2CV, AK, AZAM, of year of construction 1966
to 04/1970. Or. No. AZ575-1
Turn signal cap angularly, clear. Suitable for Citroen 2CV, AK, AZAM, of year of construction 1966
to 04/1970. Or. No. AZ575-1A
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine A 110 on the right. For light manufacturer AXO
Turn signal cap in front on the left, orange. Suitable for Citroen Dyane, Acadyane, Mehari. Renault
Alpine 110 on the right. For light manufacturers: Seima
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine A 110 on the left. For light manufacturer AXO
Turn signal cap in front on the right, orange. Suitable for Citroen Dyane, Acadyane, Mehari
Renault Alpine 110 on the left. For light manufacturers: Seima
Flasher relay for trailer operation, 12 volts. French version! Pin assignment for French: Power
supply symbol (+). Front and rear indicator connection = C symbol. Dashboard control light = R symbol. Additional control light connection = R2. Negative ground = -. If a Japanese relay is used: Plus + = X or B symbol. Connection of these indicators C = symbol L. Connection of control R = symbol P. Connection of German relay: 31 = ground = must be laid. 49 = input voltage = +. 49a = output voltage to indicator = R. C = control light = C. C2 = additional control light for trailer operation
PDF FILE 
Flasher relay, 12 V, 3 plug connections. 180 Watt power output. Suitable for Citroen 2CV, DS, HY
Renault R4, Peugeot 203, 403, 404 etc. The flasher relay does not make "click-click" noises. Connection French: Current supply symbol (+). Connection indicator in front + rear = symbol (C). Connection control light dashboard = symbol (R). If a Japanese relay is used: Plus + = symbol X or B. Connection indicator C = symbol L. connection control of R = symbol P.
Pin 6 x 14mm, for the connection parking brake to the hand brake handle on the chassis. Suitable
for Citroen 2CV6. Or. No. A314 92
Pin, for the connection throttle control cable to the oval carburetor. Suitable for Citroen 2CV6
Length: 18,0mm. Diameter: 4,93mm. Or. No. AM142-67
Pin, for the connection parking brake lever in the interior. (On the engine side). Suitable for
Citroen 2CV. Measurement: 6x20mm.
Accelerator and Brake Pedal depressor. Convenient tool for one-man operations. For depressing the
brake pedal, e.g. wheel alignment jobs, checking brake lights or trailor brakes. For depressing the accelerator, e.g. setting the engine spped or measuring omissions. 1 men operation. Finely adjustable, with high-speed release function!
Brake + hydraulic pipe (3,5mm) emergency repair set. Consisting of: 1 meter of Kunifer (copper
nickel) pipe. On 1 side flanged + Clinch screw. 2x high-speed link, 1x line seal 3,5mm. This repair set should always lie in the luggage compartment.
Brake + hydraulic line. Diameter: 3,50mm. Length: 25m. Material: Kunifer (copper - nickel alloy, to
bend simply. Kunifer does not rust). Clinch screws please specially order!
Brake + hydraulic line. Diameter: 3,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 25m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,5mm. Length: 7,62m. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 4,75mm (3/16 inch). Length: 5m. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6mm. Length: 5,0 meter. Material: Kunifer (copper - nickel alloy
simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 6,35mm. Length: 5,0 meter. Material: Kunifer (copper - nickel
alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Brake + hydraulic line. Diameter: 7,95mm (5/16 inch). Length: 5 meter. Material: Kunifer (copper
nickel alloy, simple to bend. Kunifer does not rust). Clinch screws order seperate!
Spring laterally, for the brake shoes (spring for locking pin brake shoes). Suitable for Citroen
2CV + Citroen DS. Or. Nr. A 5185
Spring plate laterally, for the pressure spring at the brake shoes. Suitable for Citroen 2CV +
Citroen DS. Or.Nr. ZC9438157U
Brake shoe spring plate assembly tool. This tool is for the safe assembly of the small spring
plates that are mounted on the side of the brake shoes (e.g. our item number 13054).
Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Reproduction from Europe. Used
until year of construction 1990. On vehicles before year of construction 07/1968 the brake shoes were pressed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).
Rear brake shoes. Suitable for Citroen 2CV, Dyane, AK, ACDY, AMI. Original manufacturer quality
Made in Spain, Italy, fitted up to 1990. On vehicles built before 07/1968 the brake shoes were pushed back by springs. These vehicles must be converted to the spring clip (which can be done without any problems, our item number 13072). Without this conversion, operational safety is not guaranteed (year of manufacture 1948 to 07/1968).
Brake shoes mounting set rear, suitable for Citroen 2CV. Scope of delivery: 4x locking pin with
spring + plate, 2x safety sheet for eccentric, 2x spring bow for the brake shoes.
Brake shoes mounting set in front, suitable for Citroen AK400, ACDY, Mehari, AMI6 (large drum in
front, 220mm diameter). Scope of delivery: 4x locking pin with spring + plates.
Locking pin brake shoe (pin by the anchor plate), suitable for rear (all 2CV) + in front (2CV with
drum brake in front). Also suitable for Citroen DS (drum brake rear). 39mm overall length. Or. No. A451-83
Brake system repair set front, for Citroen 2CV6, consisting in only new spareparts. This set
enables to renew the complete front brake system: 2X new brake calipers, 1X brand brake discs, brand brake pads + hand brake pads and 1 liter LHM. 3x brake pipe seal.
Axle on the anchor plate, for the mounting from the lower eccentrics of the brake liners. Suitable
for Citroen 2CV. Or.Nr.: AZ 451 202A
Brake shoes adjustment cam above. Suitable for Citroen 2CV + Citroen DS. Only the adjustment cam is
supplied (without axle). Made in Germany.
Brake shoes centering cam axle, suitable for Citroen 2CV + Citroen DS. For all rear drums at 2CV
and DS. Overall length 24mm. This axle has a small screw, in order to simplify mounting.
Brake centring: brake shoe centring cam axle spacer ring (installed between centring cam and anchor
plate, 10mm thick). Suitable for all Citroen 2CV rear + Citroen DS rear.
Brake shoes centering cam axle washer, suitable for Citroen 2CV. (Installed between centering cam
axle and anchor plate). Dimension: 9.5 x 27mm.
1677 Articles | Page 7 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
